.

Re: Volume Indicators for MT4

#171
mrtools wrote:
Sun Aug 18, 2019 12:03 pm
uncle wong wrote:
Sat Aug 17, 2019 8:57 pm
Dear Mrtools ,

Can you add non repainting colorings to attached indicator please ?
Could you please test this version, not sure if there is a mt4 problem or maybe my computer but can't get it to work on my side, but it should be working, if not look for a blau tvi or an blau ergodic tvi.
it workds! no issue found


Re: Volume Indicators for MT4

#172
nathanvbasko wrote:
Tue Aug 20, 2019 2:27 am
mrtools wrote:
Sun Aug 18, 2019 12:03 pm


Could you please test this version, not sure if there is a mt4 problem or maybe my computer but can't get it to work on my side, but it should be working, if not look for a blau tvi or an blau ergodic tvi.
it workds! no issue found
Thanks! Come to find out the new mt4 build 1184 think it was has a bug it will compile fine, when you try to place your file on a chart you get this error "" Error Access violation write to 0x00000034" . I messed with it and finally decided the error was from my computer, anyway long story short ended up doing a reset on my computer and lost a lot of files again :facepalm:

Re: Volume Indicators for MT4

#173
mrtools wrote:
Tue Aug 20, 2019 5:08 am
nathanvbasko wrote:
Tue Aug 20, 2019 2:27 am


it workds! no issue found
Thanks! Come to find out the new mt4 build 1184 think it was has a bug it will compile fine, when you try to place your file on a chart you get this error "" Error Access violation write to 0x00000034" . I messed with it and finally decided the error was from my computer, anyway long story short ended up doing a reset on my computer and lost a lot of files again :facepalm:
With the build 1184 - just replace metaeditor with previous metateditor
Leave the terminal.exe as is - it will keep metatrader happy and it will not attempt new downloads - and with older metaeditor you shall work the usual way (without that mess)

Re: Volume Indicators for MT4

#174
mladen wrote:
Tue Aug 20, 2019 5:37 am
mrtools wrote:
Tue Aug 20, 2019 5:08 am


Thanks! Come to find out the new mt4 build 1184 think it was has a bug it will compile fine, when you try to place your file on a chart you get this error "" Error Access violation write to 0x00000034" . I messed with it and finally decided the error was from my computer, anyway long story short ended up doing a reset on my computer and lost a lot of files again :facepalm:
With the build 1184 - just replace metaeditor with previous metateditor
Leave the terminal.exe as is - it will keep metatrader happy and it will not attempt new downloads - and with older metaeditor you shall work the usual way (without that mess)
Oh! good thing that I disabled my MT4 auto-update

In case others wanted to update manually only or in order not to experience an unexpected issue with future MT4 builds and wait for some users feedback before updating to a new build.

Change your Windows User Access Control (UAC) settings
always_notify.png
Windows UAC stops MT4 update process and asks for your confirmation. Now it’s your choice what will you answer. If you answer NO, your trading platform will not be upgraded and you will be able to use the current version you have installed. If you answer YES, then obviously MT4 will be upgraded.



Here’s what happens when I restart my MT4 with Windows UAC enabled.
always_notify_2.png

Re: Volume Indicators for MT4

#175
That doesn't work
Try opening a demo account on metaquotes demo site and see what happens. Brokers still do not have that upgrade - that is why the majority was not hit by it.


Re: Volume Indicators for MT4

#176
mladen wrote:
Tue Aug 20, 2019 9:16 am
That doesn't work
Try opening a demo account on metaquotes demo site and see what happens. Brokers still do not have that upgrade - that is why the majority was not hit by it.
Oh yes... with metaquotes it prompted asking for an update.

Luckily I have one installed MT4 build 1170 with a demo account (not from a broker)

Results:
...Windows UAC prompted me immediately and I updated it to build 1190

...so far no issue : set of v2v dynamic system indicators compiled successfully with build 1190
build_1190.jpg

Re: Volume Indicators for MT4

#177
mrtools wrote:
Tue Aug 20, 2019 5:08 am
nathanvbasko wrote:
Tue Aug 20, 2019 2:27 am


it workds! no issue found
Thanks! Come to find out the new mt4 build 1184 think it was has a bug it will compile fine, when you try to place your file on a chart you get this error "" Error Access violation write to 0x00000034" . I messed with it and finally decided the error was from my computer, anyway long story short ended up doing a reset on my computer and lost a lot of files again :facepalm:
By the way, I slightly modified the structure of your indicator. Please find the attached.
blau tvi nrp.mq4
(6.27 KiB) Downloaded 137 times
Now, Is it possible to add MTF option with this type of structure that I am using?

Thanks.

Re: Volume Indicators for MT4

#179
Hi All,

I've been looking around for volume indicators, in particular a zero cross indicator. Has anyone come across a good one? I've been on the hunt for some time and cant find one that fits what I'm looking for.

Any help would be appreciated.

Cheers
Beansy

Re: Volume Indicators for MT4

#180
Beansy wrote:
Sat Sep 07, 2019 11:57 am
Hi All,

I've been looking around for volume indicators, in particular a zero cross indicator. Has anyone come across a good one? I've been on the hunt for some time and cant find one that fits what I'm looking for.

Any help would be appreciated.

Cheers
Beansy
Welcome to the site mate :wave:

We've moved your post into the appropriate thread. Have you had a chance to look through this topic yet?
Myfxbook live trading results (new 2019 account coming soon)
Need custom MT4 coding? Send a PM to Mrtools or post here for a quote!



Who is online

Users browsing this forum: CommonCrawl [Bot], Desatar, Microsys MiggiBot [Bot], Yandex [Bot] and 11 guests