RSI (Relative Strength Index) Indicators for Metatrader 4
Example: RSI shown on a ProRealTime Chart
Re: RSI Indicators for MT4
#2Discontinued signal line rsi posted
Discontinued signal line rsx posted
Discontinued signal line rsx posted
Re: RSI Indicators for MT4
#3This was posted already on some forums, but this is an upgraded version
Added :
the set of 22 price typesoption to have rsx of non lag ma (so, having an rsx(oma) of non lag ma)some internal code upgrade
Added :
the set of 22 price typesoption to have rsx of non lag ma (so, having an rsx(oma) of non lag ma)some internal code upgrade

 NonLag_Inverse_fisher_transform_of_RSX.mq4
 (15.43 KiB) Downloaded 1483 times
Re: RSI Indicators for MT4
#4Dearest MLADENmladen wrote:This was posted already on some forums, but this is an upgraded version
Added :
the set of 22 price typesoption to have rsx of non lag ma (so, having an rsx(oma) of non lag ma)some internal code upgrade
A good addition in rsx IFT series with upgradation code and 22 prices.
regards
Indicator is just a tool.
Use it only if it can benefit you. Leave it if you don't know how to use it optimally.
Use it only if it can benefit you. Leave it if you don't know how to use it optimally.
Re: RSI Indicators for MT4
#5all rsi calculation methods added

 NonLag_Inverse_fisher_transform_of_ALL_RSI.mq4
 (20.65 KiB) Downloaded 1219 times
Re: RSI Indicators for MT4
#6Rsi(oma)
it can calculate rsi or rsi of average7 types of rsi(oma) can be calculated RSIRSXCuttler's RSIHaris' RSIRapid RSISlow RSIEhlers' smoothed RSIit can have floating or fixed levelsaverages that can be used are the standard 4 typesusual 22 types of pricesusual set of alertsmulti time frame alreadyUpgraded code (some issues solved, code optimized and simplified, and so on ...)
it can calculate rsi or rsi of average7 types of rsi(oma) can be calculated RSIRSXCuttler's RSIHaris' RSIRapid RSISlow RSIEhlers' smoothed RSIit can have floating or fixed levelsaverages that can be used are the standard 4 typesusual 22 types of pricesusual set of alertsmulti time frame alreadyUpgraded code (some issues solved, code optimized and simplified, and so on ...)

 Rsi(oma).mq5
 (50.75 KiB) Downloaded 1125 times
Re: RSI Indicators for MT4
#7Thank you one of the best trading indicators
If it had been linked with the MACD and Bollinger Band
If it had been linked with the MACD and Bollinger Band
Re: RSI Indicators for MT4
#8RSI with Fibonacci auto channel
It is using a floating levels for extremes, and the rest is divided into Fibonacci zones
One of the 7 types of rsi can be calculated :
RSIRSXCuttler's RSIHaris' RSIRapid RSISlow RSIEhlers' smoothed RSI
It is using a floating levels for extremes, and the rest is divided into Fibonacci zones
One of the 7 types of rsi can be calculated :
RSIRSXCuttler's RSIHaris' RSIRapid RSISlow RSIEhlers' smoothed RSI


 Rsi with Fibonacci auto channel 2.mq5
 (37.83 KiB) Downloaded 1076 times
Re: RSI Indicators for MT4
#10Relative strength indexFrom Wikipedia, the free encyclopediaThe relative strength index (RSI) is a technical indicator used in the analysis of financial markets. It is intended to chart the current and historical strength or weakness of a stock or market based on the closing prices of a recent trading period. The indicator should not be confused with relative strength.The RSI is classified as a momentum oscillator, measuring the velocity and magnitude of directional price movements. Momentum is the rate of the rise or fall in price. The RSI computes momentum as the ratio of higher closes to lower closes: stocks which have had more or stronger positive changes have a higher RSI than stocks which have had more or stronger negative changes.The RSI is most typically used on a 14day timeframe, measured on a scale from 0 to 100, with high and low levels marked at 70 and 30, respectively. Shorter or longer timeframes are used for alternately shorter or longer outlooks. More extreme high and low levels—80 and 20, or 90 and 10—occur less frequently but indicate stronger momentum.The relative strength index was developed by J. Welles Wilder and published in a 1978 book, New Concepts in Technical Trading Systems, and in Commodities magazine (now Futures magazine) in the June 1978 issue.[1] It has become one of the most popular oscillator indices.[2]The RSI provides signals that tell investors to buy when the currency is oversold and to sell when it is overbought. [3]CalculationFor each trading period an upward change U or downward change D is calculated. Up periods are characterized by the close being higher than the previous close: U = close now ? close previous {\displaystyle U={\text{close}}_{\text{now}}{\text{close}}_{\text{previous}}} D = 0 {\displaystyle D=0} Conversely, a down period is characterized by the close being lower than the previous period's close (note that D is nonetheless a positive number), U = 0 {\displaystyle U=0} D = close previous ? close now {\displaystyle D={\text{close}}_{\text{previous}}{\text{close}}_{\text{now}}} If the last close is the same as the previous, both U and D are zero. The average U and D are calculated using an nperiod smoothed or modified moving average (SMMA or MMA) which is an exponentially smoothed Moving Average with ? = 1/period. Some commercial packages, like AIQ, use a standard exponential moving average (EMA) as the average instead of Wilder's SMMA.Wilder originally formulated the calculation of the moving average as: newval = (prevval * (period  1) + newdata) / period. This is fully equivalent to the aforementioned exponential smoothing. New data is simply divided by period which is equal to the alpha calculated value of 1/period. Previous average values are modified by (period 1)/period which in effect is period/period  1/period and finally 1  1/period which is 1  alpha.The ratio of these averages is the relative strength or relative strength factor: R S = SMMA ( U , n ) SMMA ( D , n ) {\displaystyle RS={\frac {{\text{SMMA}}(U,n)}{{\text{SMMA}}(D,n)}}} If the average of D values is zero, then according to the equation, the RS value will approach infinity, so that the resulting RSI, as computed below, will approach 100.The relative strength factor is then converted to a relative strength index between 0 and 100:[1] R S I = 100 ? 100 1 + R S {\displaystyle RSI=100{100 \over {1+RS}}} The smoothed moving averages should be appropriately initialized with a simple moving average using the first n values in the price series.InterpretationBasic configuration Relative strength index 14periodThe RSI is presented on a graph above or below the price chart. The indicator has an upper line, typically at 70, a lower line at 30, and a dashed midline at 50. Wilder recommended a smoothing period of 14 (see exponential smoothing, i.e. ? = 1/14 or N = 14).PrinciplesWilder posited[1] that when price moves up very rapidly, at some point it is considered overbought. Likewise, when price falls very rapidly, at some point it is considered oversold. In either case, Wilder deemed a reaction or reversal imminent.The level of the RSI is a measure of the stock's recent trading strength. The slope of the RSI is directly proportional to the velocity of a change in the trend. The distance traveled by the RSI is proportional to the magnitude of the move.Wilder believed that tops and bottoms are indicated when RSI goes above 70 or drops below 30. Traditionally, RSI readings greater than the 70 level are considered to be in overbought territory, and RSI readings lower than the 30 level are considered to be in oversold territory. In between the 30 and 70 level is considered neutral, with the 50 level a sign of no trend. [4]DivergenceWilder further believed that divergence between RSI and price action is a very strong indication that a market turning point is imminent. Bearish divergence occurs when price makes a new high but the RSI makes a lower high, thus failing to confirm. Bullish divergence occurs when price makes a new low but RSI makes a higher low.[1]:68Overbought and oversold conditions Wilder thought that "failure swings" above 70 and below 30 on the RSI are strong indications of market reversals.[5] For example, assume the RSI hits 76, pulls back to 72, then rises to 77. If it falls below 72, Wilder would consider this a "failure swing" above 70.Finally, Wilder wrote that chart formations and areas of support and resistance could sometimes be more easily seen on the RSI chart as opposed to the price chart. The center line for the relative strength index is 50, which is often seen as both the support and resistance line for the indicator.If the relative strength index is below 50, it generally means that the stock's losses are greater than the gains. When the relative strength index is above 50, it generally means that the gains are greater than the losses.Uptrends and downtrendsIn addition to Wilder's original theories of RSI interpretation, Andrew Cardwell has developed several new interpretations of RSI to help determine and confirm trend. First, Cardwell noticed that uptrends generally traded between RSI 40 and 80, while downtrends usually traded between RSI 60 and 20. Cardwell observed when securities change from uptrend to downtrend and vice versa, the RSI will undergo a "range shift."Next, Cardwell noted that bearish divergence: 1) only occurs in uptrends, and 2) mostly only leads to a brief correction instead of a reversal in trend. Therefore, bearish divergence is a sign confirming an uptrend. Similarly, bullish divergence is a sign confirming a downtrend.ReversalsFinally, Cardwell discovered the existence of positive and negative reversals in the RSI. Reversals are the opposite of divergence. For example, a positive reversal occurs when an uptrend price correction results in a higher low compared to the last price correction, while RSI results in a lower low compared to the prior correction. A negative reversal happens when a downtrend rally results in a lower high compared to the last downtrend rally, but RSI makes a higher high compared to the prior rally.In other words, despite stronger momentum as seen by the higher high or lower low in the RSI, price could not make a higher high or lower low. This is evidence the main trend is about to resume. Cardwell noted that positive reversals only happen in uptrends while negative reversals only occur in downtrends, and therefore their existence confirms the trend.Cutler's RSIA variation called Cutler's RSI is based on a simple moving average of U and D,[6] instead of the exponential average above. Cutler had found that since Wilder used a smoothed moving average to calculate RSI, the value of Wilder's RSI depended upon where in the data file his calculations started. Cutler termed this Data Length Dependency. Cutler's RSI is not data length dependent, and returns consistent results regardless of the length of, or the starting point within a data file. R S = SMA ( U , n ) SMA ( D , n ) {\displaystyle RS={\frac {{\text{SMA}}(U,n)}{{\text{SMA}}(D,n)}}} Cutler's RSI generally comes out slightly different from the normal Wilder RSI, but the two are similar, since SMA and SMMA are also similar.