• MQL4\Experts\FNC_DB
• MQL4\Files\FNC_DB
• MQL4\Indicators\FNC_DB
• MQL4\Indicators\FNC_DB_Inds

• MQL4\Libraries\FNC_DB_lib.ex4

• MQL4\Experts\FNC_DB → MQL4\Experts\
• MQL4\Experts\funchi → MQL4\Experts\
• MQL4\Files\FNC_DB → MQL4\Files\
• MQL4\Indicators\FNC_DB → MQL4\Indicators\
• MQL4\Indicators\FNC_DB_Inds → MQL4\Indicators\
• MQL4\Indicators\funchi → MQL4\Indicators\

• templates\* → templates\

HalloweenJack wrote: Thu Sep 04, 2025 4:35 am Thank you for all the incredible work you've done on this amazing tool.

I have a question that might be obvious, or perhaps I'm just missing something...

I'm using the Gann Made Easy strategy with the 1HR timeframe as the trend filter and the 15M timeframe as the entry trigger. What I'm trying to achieve is to only trigger an order when a new 15M signal appears that aligns with the current 1HR direction.

Here’s the issue I’m running into:

Sometimes, the 15M gives a new bullish signal while the 1HR is still bearish. Later, when the 1HR flips to bullish, it seems to trigger an order — but by then, the entry feels late, since the 15M signal is no longer fresh.

What I want is for the system to only enter on a new 15M signal that matches the current 1HR trend direction at the time the 15M signal is generated — not after the fact.

Hope that makes sense! Let me know if I’m missing something or if this behavior can be configured.

Thanks again!

rsistoch wrote: Thu Sep 11, 2025 5:59 pm Hi Funchi-san,
Can you add more open charts in FNC DB? I want to use more than 4 charts.
Currently it is 5 charts but in the future it may increase so it would be more convenient if there is an option to customize in DB, or apply the open chart feature to all currently charts on MT4 except DB.
Thanks!!!

funchi wrote: Thu Sep 11, 2025 9:12 pm I’ve added the “Change all charts to the same symbol” parameter.
If you set “Change all charts to the same symbol” to true, and configure “Do not resize & keep TF” and “Minimally”, it should work as you expect.
You will need to align the charts yourself separately.

rsistoch wrote: Fri Sep 12, 2025 3:06 am Thanks for your help, the open chart feature works perfectly.
Regarding the 2 new indicators added to FNC DB: Ultimate Smoother and Step average
Both of them have the same problem that if I set the Display order key to greater than 200, the DB will freeze immediately.
If the parameter is set to less than 200 they will work normally.
I tried many times and the result is still the same.
The old indicators still work fine.
This can be easily fixed by setting the parameter to less than 200 but I think it will become inconvenient if more new indicators are added to FNC later.
I hope you fix it.
Thank you!!!

funchi wrote: Fri Sep 12, 2025 8:21 am The Display order key works fine with up to 8 digits, and I’ve been using values over 200 without any issues.
I believe there may be another underlying issue.
Could you please share the last working template before the freeze occurs, along with details about which changes cause the freeze?

Just to confirm – it does actually freeze, correct?
And as a result, MT4 has to be forcefully closed, correct?

rsistoch wrote: Fri Sep 12, 2025 9:53 am DB only freezes when I add 1 of the 2 new indicators I mentioned above to DB with parameter greater than 200.
If it is 199 it still works normally.
Only FNC DB window freezes, all signals and time displayed on DB stop.
All other windows and MT4 still work normally.
Edit: I just found out that this bug happens with all FNC indicators.
If hide colum = true it will work with any order key parameter. If Hide colum = false, order key > 200 only FNC DB windows will freeze.
All other windows and MT4 still work normally.