rsistoch wrote: Wed Aug 13, 2025 3:08 am Sure, pls check.
Semafor 12 Bar to check: 2
Signal box M5 bar to check: 1
all signals display on DB is correctly, only problem with alert time.
You can compare the DB time and alert time in the pictures I attached.
TY!!

The signals displayed on the dashboard wait for a new candlestick, but alert notifications work differently.

Alert notifications operate based on the PC time.
They are determined by the PC time, the “Entry/Exit/Alert time frame”, and the “Alert Delayed seconds” parameters.
For example:
If “Entry/Exit/Alert time frame” is set to 5 and “Alert Delayed seconds” is set to 15, the system will check for signals and send alerts 15 seconds after every 5-minute interval.

I personally do not use alerts, and I find it bothersome to receive alert notifications every time a new candlestick appears, which is why I designed it to work this way.
However, with monitoring of around 11 currency pairs, it may not be too bothersome.
I will create a mode that sends alerts when a new candlestick appears, so please wait a little while.

Also, EAs wait for a new candlestick.

"Alert trigger type" description

When "Alert after delay at set intervals" is selected
Alert notifications operate based on the PC time.
Checks for a signal after the specified delay, at the set time intervals, and then triggers an alert.
Sets the "Entry/Exit/Alert time frame" parameter.
Sets the "Alert Delayed seconds" parameter.
For example:
If “Entry/Exit/Alert time frame” is set to 5 and “Alert Delayed seconds” is set to 15, the system will check for signals and send alerts 15 seconds after every 5-minute interval.
Alerts are sent together after the number of seconds set in "Alert Delayed seconds". However, if a new candlestick appears after the set delay time, the alert will be sent at the time of the next candlestick. This method is not suitable for quiet market conditions or when quick order execution is required.

When "Alert on new bar" is selected
Checks for a signal whenever a new candlestick is formed, and then triggers an alert.
Sets the "Entry/Exit/Alert time frame" parameter.
Alerts are sent each time a new candlestick appears. As alerts are not grouped, the pop-up window and alert sound may become bothersome.

Note:
The EA operates based on the appearance of a new candlestick.

rsistoch wrote: Wed Aug 13, 2025 3:08 am Sure, pls check.
Semafor 12 Bar to check: 2
Signal box M5 bar to check: 1
all signals display on DB is correctly, only problem with alert time.
You can compare the DB time and alert time in the pictures I attached.
TY!!

A new mode has been added to the alert function that sends alerts each time a new candlestick appears.
post1295570537.html#p1295570537

Hello friend, how long have you been?
I'm back to talk about this indicator. I'd like to know if it's possible to create a multiframe dashboard with it.

Parameters: buy, sell, uptrend, downtrend, reversal, star

is a very useful price action indicator

We have added VWAP to the BEATS V5 signal dashboard.

Please make sure to use the latest version of the dashboard:
post1295507591.html#p1295507591

You can download the template from the link below.
The template that includes VWAP is "BEATS V5_DB_Detail_M30.tpl":
post1295557384.html#p1295557384

1337br wrote: Thu Aug 21, 2025 5:00 am Hello friend, how long have you been?
I'm back to talk about this indicator. I'd like to know if it's possible to create a multiframe dashboard with it.

Parameters: buy, sell, uptrend, downtrend, reversal, star

is a very useful price action indicator

A lot of lines are displayed — how should I use them? Could you explain the trading rules?

Trading Overview
The strategy aims to capture potential trends, retracements, and breakouts. It is a standard trading approach.

Although mostly discretionary, to aggressively capture opportunities, signals for “Entry Imminent” and “Line Break” are displayed.

Explanation for Short (Sell) Trades

• On the 1-hour chart, confirm a potential downtrend and check for a break of the swing low.
• Switch to the 5-minute chart and observe retracement. It is preferable if an uptrend forms on the 5-minute chart.
• On the 5-minute chart, confirm that the price resumes the trend direction after retracement. Check for a break of the swing low.
• Enter the trade.

Signal Display

• To confirm a potential trend, a down signal is displayed on the 1-hour chart when a moving average dead cross occurs.
• To confirm retracement, a down signal is displayed on the 5-minute chart when a moving average golden cross occurs.
• Manually draw a swing low line on the 5-minute chart and update it as needed.
• To confirm resumption of trend direction after retracement, an “O” signal is displayed on the 5-minute chart when the price breaks the swing low line.
• Enter the trade.

Stop Loss (SL)

• Set at the most recent high on the 5-minute chart.

Take Profit (TP)

• Close the trade if the price breaks above the retracement high.

Dashboard Signal Explanation (from left to right)

• H4 : A down signal is displayed when the price is below SMA 20.
• H1 : A down signal is displayed when SMA 20 is below SMA 80.
• M5 : A down signal is displayed when SMA 20 is above SMA 60.
• M5 : An “O” signal is displayed when the open and close prices cross the line.
• M5 : An “O” signal is displayed if a line has been drawn manually.
• An entry signal is shown when signals 1-3 match. This requires manually drawing the line.
• Enter the trade when signal 4 is displayed.

Performance Overview

• Positions are sized with 1% risk per trade.
• “PL%“ on the dashboard represents the profit/loss percentage relative to the account balance.
• The results shown are for today only.

Reflections

• Monitoring 34 instruments aggressively on the 5-minute chart is very busy.
• Consider using higher timeframes.

Notes

• The line-cross signal only applies to lines drawn using the "Draw_HL_LH_Line" tool.

funchi wrote: Fri Aug 22, 2025 9:59 pm Trading Overview
The strategy aims to capture potential trends, retracements, and breakouts. It is a standard trading approach.

Although mostly discretionary, to aggressively capture opportunities, signals for “Entry Imminent” and “Line Break” are displayed.

Explanation for Short (Sell) Trades

• On the 1-hour chart, confirm a potential downtrend and check for a break of the swing low.
• Switch to the 5-minute chart and observe retracement. It is preferable if an uptrend forms on the 5-minute chart.
• On the 5-minute chart, confirm that the price resumes the trend direction after retracement. Check for a break of the swing low.
• Enter the trade.

0.PNG
Signal Display

• To confirm a potential trend, a down signal is displayed on the 1-hour chart when a moving average dead cross occurs.
• To confirm retracement, a down signal is displayed on the 5-minute chart when a moving average golden cross occurs.
• Manually draw a swing low line on the 5-minute chart and update it as needed.
• To confirm resumption of trend direction after retracement, an “O” signal is displayed on the 5-minute chart when the price breaks the swing low line.
• Enter the trade.

Stop Loss (SL)

• Set at the most recent high on the 5-minute chart.

Take Profit (TP)

• Close the trade if the price breaks above the retracement high.

Dashboard Signal Explanation (from left to right)

• H4 : A down signal is displayed when the price is below SMA 20.
• H1 : A down signal is displayed when SMA 20 is below SMA 80.
• M5 : A down signal is displayed when SMA 20 is above SMA 60.
• M5 : An “O” signal is displayed when the open and close prices cross the line.
• M5 : An “O” signal is displayed if a line has been drawn manually.
• An entry signal is shown when signals 1-3 match. This requires manually drawing the line.
• Enter the trade when signal 4 is displayed.

t.PNG
Performance Overview

• Positions are sized with 1% risk per trade.
• “PL%“ on the dashboard represents the profit/loss percentage relative to the account balance.
• The results shown are for today only.

1.PNG
Reflections

• Monitoring 34 instruments aggressively on the 5-minute chart is very busy.
• Consider using higher timeframes.

Notes

• The line-cross signal only applies to lines drawn using the "Draw_HL_LH_Line" tool.

Thanks, Mr. Funchi. You're the best. scanner shows opposite signals?

funchi wrote: Thu Aug 21, 2025 5:35 pm A lot of lines are displayed — how should I use them? Could you explain the trading rules?

Hello funchi
Example 1:
a) On m15, a sell signal appears, either a downtrend or a shooting star.
b) On m5, a sell signal appears.
c) On m1, a sell signal appears, following the other timeframes.

Example 2:
a) On m15, the candles are arriving in a straight line (showing past resistance).
b) On m5, the price approaches the line and gives a sell signal, either a downtrend or a shooting star.
c) On m1, a sell signal appears.

asgariHoo wrote: Fri Aug 22, 2025 11:09 pm Thanks, Mr. Funchi. You're the best. scanner shows opposite signals?
Screenshot 2025-08-22 180440.png

Yes. I reversed the fast and slow periods in the "FNC_MA_Cross" indicator. I thought it would be a smarter solution than using "Opposite" in "FNC_DB".