Greedy Signal on the First 2nd Dot
This signal appears after a major price break and retracement.
(The download is not yet available.)

Entry Signal Conditions (Example: Sell Setup):

• After a downward arrow appears, the swing low is broken.
  (Arrow: 250, 1st Dot: 60, Swing Low Dot: 12, Extension: 1.5 or higher)
• A retracement occurs after the breakout.
  (2nd Dot: 60, Retracement Range: 0.6–0.8)

Market Entry:

• Enter a market order when the signal appears.
• Set the Stop Loss at the arrow level.
• Set the Take Profit at the 1st dot level.
• Risk-to-reward ratio is approximately 1:1.

Timeframes:

• Signals are displayed on both M1 and M5 charts.
• An entry is valid if it appears on either timeframe.

Currency Pairs:

• Signals are shown for all instruments listed in the Market Watch window.

Test Results:

• We monitored 28 major currency pairs along with NIKKEI, HK50, ASX, and XAUUSD.
• This test was conducted only during the Tokyo session (morning only).
• All trades were forcibly closed at 12:00.
• Position sizing was based on a 0.1% risk per trade.
• The attached image shows a result of +0.35% profit.

Version Updated
(The download is not yet available.)

Update Summary

The dashboard has been changed.
FNC_DB

• Now allows you to set the start date for profit/loss calculation.

A new signal indicator has been added:

• FNC_Swing_Break
  Displays a signal after a swing low/high is broken, and continues to show the signal until the opposite condition is broken.
• FNC_ZigFib_Pullback
  Displays a signal when the price extends beyond a swing low/high and then retraces.
• FNC_Pivot
  A pivot indicator. Signals are shown when the price breaks above/below levels or remains within a level range.

There are no changes to the EA.

funchi wrote: Thu Jul 10, 2025 2:22 pm Version Updated
(The download is not yet available.)

Update Summary

The dashboard has been changed.
FNC_DB

• Now allows you to set the start date for profit/loss calculation.

A new signal indicator has been added:

• FNC_Swing_Break
  Displays a signal after a swing low/high is broken, and continues to show the signal until the opposite condition is broken.
• FNC_ZigFib_Pullback
  Displays a signal when the price extends beyond a swing low/high and then retraces.
• FNC_Pivot
  A pivot indicator. Signals are shown when the price breaks above/below levels or remains within a level range.

There are no changes to the EA.

The download is now available.
post1295507591.html#p1295507591

Added the signal indicator: FNC_SignalMemoAssistant.

My Notes – Upcoming Update (Not Yet Available for Download)

Indicator Overview
Signal Memo Assistant is a manual support tool designed for discretionary traders.
It allows users to manually record and display trade signals or status information on the FNC_DB dashboard, based on individual trade assessments.
This tool is intended to complement automated signal indicators, helping traders make comprehensive entry and exit decisions.

Main Features:

• Manually set tradable or non-tradable status and display it on the FNC_DB dashboard
• Record directional bias using up arrows, down arrows, or flat (sideways) indication based on user discretion

Simple mouse operations for input:

• Click → Not Tradable
• Double-click → Tradable
• Shift + Click → Up Arrow
• Ctrl + Click → Down Arrow
• Shift + Ctrl + Click → Flat

FNC_ZigFib_Pullback – Description

The First 2nd Dot

　Min Fibo Extension level (Default: 1.4)
　Line 1 length / Line C length
　The condition is met when the ratio is greater than or equal to this value.

　Min/Max Fibo Retracement level (Default: 0.4–0.8)
　Line 2 length / Line 1 length
　The condition is met when the ratio is within this range.

　An up signal is displayed only when the positional relationship between the arrow and the dot matches the structure shown in the reference image.
　This setup assumes a retracement following a breakout above the recent swing high.

Trend Retrace (4th Dot)

　Min Fibo Extension level (Default: 1.4)
　Line 3 length / Line 2 length
　The condition is met when the ratio is greater than or equal to this value.

　Min/Max Fibo Retracement level (Default: 0.4–0.8)
　Line 4 length / Line 3 length
　The condition is met when the ratio is within this range.

　An up signal is displayed only when the arrow and dot positions conform to the pattern shown in the image.
　This setup assumes a retracement within a confirmed uptrend, where both highs and lows are rising.

funchi wrote: Sun Mar 26, 2023 1:21 pm Function Overview

• Displays direction signals for each indicator.
• Displays buy and sell signals for entry and exit by combining the directional signals of each indicator.
• Displays signals for multiple currency pairs.
• Automatic trading is available.

Trading Strategies

• XU v010@Xard777 by LegendaryWvW (Created from the development kit)
  　　post1295567112.html#p1295567112
  　　
• BEATS V5 signal dashboard (Created from the development kit)
  　　post1295557384.html#p1295557384
  　　
• XU v007-MA@Xard777 by dacanba (Trading Strategy Number 4031)
  　　post1295537267.html#p1295537267
  　　
• RSI/Stochastics by mate (Trading Strategy Number 4032)
  　　post1295537384.html#p1295537384
  　　
• 2ndDot in 2ndDot by funchi's daughter (Trading Strategy Number 4033)
  　　post1295537387.html#p1295537387
  　　
• 2nd signals of various periods by funchi's daughter (Trading Strategy Number 4034)
  　　post1295538021.html#p1295538021
  　　(post1295538034.html#p1295538034)
  　　
• Signal simple scanner for "Xard Universe version XU v010" by funchi's daughter (Trading Strategy Number 4041)
  　　post1295538596.html#p1295538596
  　　
• Signal simple scanner for "Xard XU v007-MA" by funchi's daughter (Trading Strategy Number 4042)
  　　post1295539004.html#p1295539004
  　　
• Nadaraya Watson Envelope@LuxAlgo by lukgoku (Trading Strategy Number 4043)
  　　post1295539098.html#p1295539098

Settings

• Installation Instructions for The FNC Greedy System
  　　post1295567596.html#p1295567596
  　　
• Setup of prefix or suffix
  　　post1295539110.html#p1295539110
  　　
• Point to pips conversion settings
  　　post1295539110.html#p1295539110
  　　
• Stop loss setting per symbol
  　　post1295539178.html#p1295539178
  　　
• Take profit setting per symbol
  　　post1295539177.html#p1295539177
  　　
• Trailing stop setting per symbol
  　　post1295539176.html#p1295539176
  　　
• FNC_DB signal columns settingsl
  　　post1295557943.html#p1295557943
  　　
• EA's operation scheduler
  　　post1295539349.html#p1295539349
  　　
• Parameter set values for each indicator
  　　post1295558024.html#p1295558024

About FNC_Indicators

• Description of "FNC_2ndDot"
  　　from : post1295565695.html#p1295565695
  　　to : post1295566069.html#p1295566069
  　　Using the default values gives less signal.
• Description of "FNC_Triangle_to_Triangle"
  　　post1295566483.html#p1295566483
  　　and
  　　post1295566504.html#p1295566504
• Description of "FNC_ZigFib_Pullback"
  　　post1295568697.html#p1295568697
• Description of "FNC_SignalMemoAssistant"
  　　post1295568696.html#p1295568696

Other tools

• Histogram signal for XU v010-MT5-Setup
  　　FNC_XU v010_XARD_Signals
  　　post1295566689.html#p1295566689

Cautions

• Indicators for each trading strategy cannot be mixed. (However, excluding those created from development kits.)
• The version number identifies the Trading strategy number. (However, excluding those created from development kits.)
• Please use a tool or other tool to load historical data for all currency pairs.

About funchi

funchi's daughter started posting
　　post1295536798.html#p1295536798
funchi is back!
　　post1295565237.html#p1295565237


Latest version
The FNC Greedy System.zip

HI Mr. Funchi.Thank you for the updated FNC greedy system.
After checking the indicators, I found that the triangle-to-triangle signal is not correct. Before you make it appear as a triangle and stay as a signal until another triangle appears, would you check that?
post1295566483.html#p1295566483

asgariHoo wrote: Mon Jul 14, 2025 2:02 am HI Mr. Funchi.Thank you for the updated FNC greedy system.
After checking the indicators, I found that the triangle-to-triangle signal is not correct. Before you make it appear as a triangle and stay as a signal until another triangle appears, would you check that?
post1295566483.html#p1295566483

Currently, semaphores are being used.
The settings depend on the user.

There is no need to recheck—it is functioning correctly based on the semaphore.

Is there an indicator that displays triangles?
If the mechanism is unclear, it will not function in exactly the same way.
In other words, without the source code, the detailed functionality cannot be known.
Alternatively, the parameters might give us a clue.

It might also be a bug.
However, without knowing the situation, it cannot be resolved.

Alternatively, is there a triangle indicator available?
It is possible to make it dependent on that.
However, if we don’t know whether the current issue is a bug, relying on the triangle indicator may result in the same malfunction occurring.

A similar issue occurred in the past.
At that time, I was irritated and didn’t provide a detailed explanation,
but some indicators modify the parameter values within the code.
However, I am using the parameter settings as they are, without modification.

If the indicator is not dependent on, or cannot be made dependent on, the signal indicator,
then discrepancies between the results of the signal indicator and the indicator itself are likely to occur.

funchi wrote: Mon Jul 14, 2025 8:24 am Currently, semaphores are being used.
The settings depend on the user.

There is no need to recheck—it is functioning correctly based on the semaphore.

Is there an indicator that displays triangles?
If the mechanism is unclear, it will not function in exactly the same way.
In other words, without the source code, the detailed functionality cannot be known.
Alternatively, the parameters might give us a clue.

It might also be a bug.
However, without knowing the situation, it cannot be resolved.

Alternatively, is there a triangle indicator available?
It is possible to make it dependent on that.
However, if we don’t know whether the current issue is a bug, relying on the triangle indicator may result in the same malfunction occurring.

A similar issue occurred in the past.
At that time, I was irritated and didn’t provide a detailed explanation,
but some indicators modify the parameter values within the code.
However, I am using the parameter settings as they are, without modification.

If the indicator is not dependent on, or cannot be made dependent on, the signal indicator,
then discrepancies between the results of the signal indicator and the indicator itself are likely to occur.

Thank you for responding. Would you add a take profit percent for each pairs. Like a basket, take profit. on FNC_DB_EA.

Dear Funchi.
I hope you are well.
I'm sorry for this request indicator. I know you said we need to add a system to the forum, but I've already shared my system there. Now, I just have one last request to add an indicator to FNC.
post1295561133.html#p1295561133

New Step NEMA indicator

Appreciated.
神のご加護がありますように

asgariHoo wrote: Thu Jul 17, 2025 2:27 am Dear Funchi.
I hope you are well.
I'm sorry for this request indicator. I know you said we need to add a system to the forum, but I've already shared my system there. Now, I just have one last request to add an indicator to FNC.
post1295561133.html#p1295561133

New Step NEMA indicator

Appreciated.
神のご加護がありますように

> I've already shared my system there.
Could you tell me the URL?