Forexlearner wrote: Fri May 12, 2023 5:02 pm just wanted to say thanks for all this amazing work Funchi

i think Xard's view with the current system is he exits when he first sees a white or opposite candle colour or using the "don't be greedy" rule, he said so a couple of times, but i think there isn't a rule.

Thank you very much.
I will refer to it.

funchi wrote: Fri May 12, 2023 5:25 pm Thank you very much.
I will refer to it.

Friend, thank you very much for your dedication to this project....

I had an idea, the low timeframe signals appear after the color change of the higher timeframe chart;;;
example:
1) the candle is WHITE on the 1hr timeframe this indicates indecision and MAYBE a trend change, with this WHITE candle we can go to a lower timeframe and try to enter a trade based on the color change of the lower timeframe and the indecision of the greatest

2) The candle is white on the higher timeframe, and the candle is blue on the lower 1 timeframe, we should try to buy

Would it be possible to create on the panel and detect the WHITE color (indecision) in a larger time frame candle?

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

友よ、このプロジェクトへの献身的なご尽力に心より感謝申し上げます。

思いついたのですが、低い時間枠のシグナルは、高い時間枠のチャートの色の変化の後に表示されます;;;
例：
1) ローソク足は 1 時間枠で白色です。これは優柔不断を示し、おそらくトレンドの変化を示します。この白いローソク足を使用して、より低い時間枠に移動し、より低い時間枠の色の変化と優柔不断に基づいて取引に参加することを試みることができます。最高の

2) ローソク足は高い時間枠では白で、ローソク足は低い時間枠では青です。購入を試みる必要があります。

パネル上にローソク足を作成し、より大きな時間枠のローソク足で白の色 (優柔不断) を検出することは可能でしょうか?

1337br wrote: Fri May 12, 2023 10:09 pm Friend, thank you very much for your dedication to this project....

I had an idea, the low timeframe signals appear after the color change of the higher timeframe chart;;;
example:
1) the candle is WHITE on the 1hr timeframe this indicates indecision and MAYBE a trend change, with this WHITE candle we can go to a lower timeframe and try to enter a trade based on the color change of the lower timeframe and the indecision of the greatest

2) The candle is white on the higher timeframe, and the candle is blue on the lower 1 timeframe, we should try to buy

Would it be possible to create on the panel and detect the WHITE color (indecision) in a larger time frame candle?

Does it look like this?

FNC Greedy System_post#182_test.tpl
Contents of post#182

FNC Greedy System_post#182.tpl
Content of post #182 + v39

funchi wrote: Fri May 12, 2023 11:30 pm Does it look like this?

FNC Greedy System_post#182_test.tpl
Contents of post#182

FNC Greedy System_post#182.tpl
Content of post #182 + v39

私の考えはこうなるだろう
Sema 4(m15) 2dot (m5) EMA36(m15) U/D(m5) EMA36 (h1) **キャンドルカラー ホワイト (h1)


my idea would be
Sema 4(m15) 2dot (m5) EMA36(m15) U/D(m5) EMA36 (h1) **candle color white (h1)


xxxxxxxxxxxxxxxxxx

The idea would be to take an entry when the h1 candle is white or undecided, before it turns blue, entering m5 when it turns blue, and mixing with the rest of the 2 point panel etc.


h1 ローソク足が青に変わる前に白または未決定のときにエントリーし、青に変わったら m5 にエントリーし、残りの 2 ポイント パネルと混ぜるというアイデアになります。

funchi wrote: Fri May 12, 2023 11:30 pm Does it look like this?

FNC Greedy System_post#182_test.tpl
Contents of post#182

FNC Greedy System_post#182.tpl
Content of post #182 + v39

はい、そうです、h1 白またはグレーのローソク足で迷っています... m15 青のローソク足、m5 青のローソク足 + 2 番目の点

アイデアは、パネルのすべてを使用し、この変数を追加して、より高い時間枠で白いローソク足を検出することです。

Yes that's right, h1 white or gray candle indecision... m15 blue candle, m5 blue candle + second point

the idea is to use everything the panel has and add this variable to detect the white candle in higher timeframes.....

funchi wrote: Fri May 12, 2023 11:30 pm Does it look like this?

FNC Greedy System_post#182_test.tpl
Contents of post#182

FNC Greedy System_post#182.tpl
Content of post #182 + v39

I attached pictures to make it clearer,
1) the white or gray candle of the higher chart time (h1) does not need to have closed, if you wait for it to close it will form 4 candles of m15 correct? so maybe it's better to enter before closing the h1 (white) candle
2) the red candlestick on m15 needs to close, confirming a possible sell entry
3) the red candles on m5 indicate a sell entry in favor of the indecision (white candle) of the h1....

Do you have any ideas for a template? mixing everything

XXXXXXXXXXXXXXXX

分かりやすいように写真を添付し​​ましたが、
1) チャート時間の高い方 (h1) の白または灰色のローソク足が閉じている必要はありません。閉じるのを待っていれば、m15 の 4 本のローソク足が形成されますよね？ なので、h1（白）のローソク足を閉じる前にエントリーした方が良いかもしれません。
2) m15 の赤いローソク足を閉じる必要があり、売りエントリーの可能性を確認します。
3) m5 の赤いローソク足は、h1 の優柔不断 (白いローソク足) を支持する売りエントリーを示します。

テンプレートに関するアイデアはありますか?すべてを組み合わせてください

i've been following the day looking at the dashboard, trying to learn how it works, and I've got a question/doubt/suggestion, not sure what to call it
please be patient if i have trouble to explain or even worst if what i say doesn't make sense, as i never fully master the xard system, but I'm trying and i think this dash is helping me a lot

Anyway, in these 2 cases the trend keeps going but the the semaphore goes against all the other signals. As much as i can understand as soon as it hits a top of bottom and the trend goes back a bit it stops registering, and it makes sense in the context that it's just a entry signal and the trend might revert at that point.

Now this may get confusing but i will try to explain, as much as i can understand (and correct me if i'm wrong) the signals and alerts only come at the 15 minute candle close, so we may miss an entry, in this time between it's all the same colours and the trend finds a new momentary top.

edit: in an extreme it may miss the trend all together if by chance at all the 15 minute candle close it is in a small correction

Not sure how the EA works as i can't even use EA because my broker doesn't support MT4, so here is the thing:

Going back to the exit strategy Funchi was asking about a bit earlier, maybe a option, a new column, idk exactly what, that kept the indication to stay on the trade if all the signals are on the same direction, same candle colour, above open line, etc... even if momentarily the signal is no longer coherent with the rest because the price reversed a bit momentarily as it always does. This could be our "stay in the trade" indication, until one of the other signals reverse, the candle at the 15 minute close changes colour would be the fist indication i guess, to a neutral colour or a reverse colour.

This could be useful for a EA, but like i said i can't use EA's so a different indication on the dashboard to stay on the trade and then exit with an alert would be awesome.

1337br wrote: Thu May 04, 2023 8:36 am the version that changes the colors of the arrows is totally crazy, change it for the previous version that the arrows don't change color

Resolved?

viewtopic.php?p=1295511625#p1295511625

[quote=funchi post_id=1295512258 time=1683846815 user_id=4953487]
Hi RollerAndTrading

This template is,
- Signals are rarely generated.
- An entry signal is given when all directions of each signal match.
[/quote
Hi funchi ,

after opening the template The Greedy System v 39 tel I get this image and not as above. please tell me how to proceed

download/file.php?mode=view&id=3462274

1337br wrote: Fri May 12, 2023 11:56 pm my idea would be
Sema 4(m15) 2dot (m5) EMA36(m15) U/D(m5) EMA36 (h1) **candle color white (h1)
xxxxxxxxxxxxxxxxxx
The idea would be to take an entry when the h1 candle is white or undecided, before it turns blue, entering m5 when it turns blue, and mixing with the rest of the 2 point panel etc.

Would you like to set it up yourself? Can you do it?

Since you have not provided details on the set values, I will post the procedure.

The procedure is as follows

Open a new chart. Any currency pair and time frame can be used.

Add indicator 'FNC_dashboard'.

Add indicator 'FNC_dashboard_Ind_ms_Semafor'.
Set parameters.
'TimeFrame' ... M15
'Period' ... ????
'Dev_Step' ... ????

Add indicator 'FNC_dashboard_Ind_ms_2nd_Dot'.
Parameters.
'TimeFrame' ...? M5
'Period1 (small dot)' ... ????
'Period2 (middle dot)' ...?
'Period3 (big dot)' ...? ????
'Dev_Step_1 (small dot)' ...? ????
'Dev_Step_2 (middle dot)' ...? ????
'Dev_Step_3 (big dot)' ... ????
'Signal judge method' ... ?? ????

Add indicator 'FNC_dashboard_Ind_ms_ma'.
Set parameters.
'TimeFrame' ... ?? M15
'MA Period' ... 36
'MA Method' ... EMA
'MA Applied Price' ... ????
'Signal judge method' ... ????

Add indicator 'FNC_dashboard_Ind_ms_CandleColor'.
Set parameters.
'TimeFrame' ...? M5
'Signal judge method' ... ????

Add indicator 'FNC_dashboard_Ind_ms_ma'.
Set parameters.
'Signal column number' ...? 270
'TimeFrame' ... H1
'MA Period' ... 36
'MA Method' ... EMA
'MA Applied Price' ... ????
'Signal judge method' ... ????

Add indicator 'FNC_dashboard_Ind_ms_CandleColor'.
Set parameters.
'Signal column number' ... ?? 280
'TimeFrame' ... H1
'Signal judge method' ... ????

Open the parameter setting screen for indicator 'FNC_dashboard'.
Set the parameters.
'Signal 6th column' ...? Flat
'Tile Patern' ... ????
'Chart timeframe' ...? ????
'Chart template name' ...? ????
'Alert time frame' ... ?? M5