mate wrote: Wed Dec 27, 2023 11:37 am good afternoon. My idea is to catch situations like this. Is it possible to automate this into your system?

What are the indicators?
What are the signal conditions?

This is just an idea, there are no results yet.. If you are interested, take a look. The condition that the two indicators match is implemented in arrows, you can add kijun (+smoothed) for more accurate results. thank you. Happy New Year to all of you. All the best in the New Year

funchi wrote: Wed Dec 27, 2023 10:18 am Indicator added.
Not uploaded in post#1.
If you would like to add a determination method, please post it.

Alerts are set in the FNC_DB2 parameters.
The name is the same. Note the destination folder.

You're amazing bruh...can't thank you enough.

mate wrote: Thu Dec 28, 2023 4:03 am This is just an idea, there are no results yet.. If you are interested, take a look. The condition that the two indicators match is implemented in arrows, you can add kijun (+smoothed) for more accurate results. thank you. Happy New Year to all of you. All the best in the New Year

Indicator added.
Not uploaded in post#1.
If you would like to add a determination method, please post it.

"Tenkan"
This was not created because I thought it only has the function of "Tenkan_Sen-Kijun_Sen Histo 02" and "TMA+CG mladen NRP".
The role of FNC_DB2 is to match signals.
But it is not a perfect match, so please let me know if you find it difficult to use.

"Tenkan_Sen-Kijun_Sen Histo 02"
Please use "Tenkan-sen is above/below Kijun-sen" in "FNC_Ichimoku".

"TMA+CG mladen NRP"
"FNC_TMA_CG".

"kijun (+smoothed)"
"FNC_kijun_smoothed".

"Kumo_Breakout_Histo"
Please use "Price is above/below kumo" in "FNC_Ichimoku".

mate wrote: Wed Dec 27, 2023 11:37 am good afternoon. My idea is to catch situations like this. Is it possible to automate this into your system?

I have created a template as far as we can tell.
However, only entries.

bug fix.
When an exit and entry signal are displayed at the same time,
A bug has been addressed that could cause the entry to be delayed by one bar.
This would reduce the loss during fakes ?.
Not uploaded in post#1.

funchi wrote: Wed Dec 27, 2023 10:18 am
Alerts are set in the FNC_DB2 parameters.
The name is the same. Note the destination folder.

I get it now. Will I be able to receive alert signals from the cycle channel indicator with this setting in the FNC_DB2 parameters?

Reverent wrote: Sat Dec 30, 2023 2:47 am I get it now. Will I be able to receive alert signals from the cycle channel indicator with this setting in the FNC_DB2 parameters?

funchi cycle3.png

I am more concerned about something else,
There is a blank in the currency pair list.
Can you post the template so we can investigate the cause?

I didn't explain myself well enough.
Alerts for any one indicator cannot be notified.
If necessary, please create a dashboard for just any one indicator.

About the simulation,
RESET
It was difficult to use, so we made major changes.
post1295530600.html#p1295530600
post1295530601.html#p1295530601


New Overview
　　Simulate the performance of trading strategies created with FNC_DB2.
　　Simulate each currency pair based on the FNC_DB2 template.


procedure
Prepare a chart window for FNC_DB2.
　　Create a trading strategy with FNC_DB2. Or use one already created.
　　Apply the template to the chart window.
　　Deactivate automated trading.
　　Set the "Testing mode" parameter of "FNC_DB2" to "true".

Prepare a chart window of the currency pair to be simulated.
　　Open one new chart window.
　　Apply the template for your trading strategy.
　　Set the currency pair.
　　Set the entry/exit time frame.
　　Add the "FNC_DB2_Simulation" indicator.
　　Set the "MagicNumber" parameter for "FNC_DB2_Simulation".

Preparation complete.

Start the simulation.
　　If "O" appears in "FNC_DB2", the currency pair can be simulated.
　　Click the "(MagicNumber)" button in the upper left corner in "FNC_DB2_Simulation".
　　The result will be displayed in the upper left corner in "FNC_DB2_Simulation".

Switch currency pairs.
　　Change the currency pair for "FNC_DB2_Simulation".
　　If "O" appears in "FNC_DB2", the currency pair can be simulated.
　　Click the "(MagicNumber)" button in "FNC_DB2_Simulation.
　　The results will be displayed in the upper left corner of "FNC_DB2_Simulation".

Restrictions are as follows,
　　Only one currency pair can be simulated at a time.
　　Of course, only the "FNC_" indicator.
　　EA (FNC_DB2_EA_) functions cannot be simulated.

Conditions that prevent correct simulation are as follows,
　　Use redraw type indicator.
　　Use the current candlestick as the decision.
　　Use an entry/exit time frame of 4 hours or longer.

Future issues/problems include the following,
　　Poor response.
　　When using it, it is recommended to use "MT4" - "Tools" - "Options" - "Max bars" at about 1000.
　　Some indicators have a limited number of bars.
　　Parameters that set local time need to be changed to server time.

Indicators that cannot be used are as follows,
　　FNC_ADR
　　FNC_OpenLine
　　FNC_Peaky
　　FNC_Candle
　　FNC_CSS
　　FNC_CCFp
　　FNC_Ku-chart
　　FNC_TradingSymbols
　　FNC_SignalBox
　　FNC_SignalManually
　　etc.
　　There are quite a few that are not available.
　　If you have an indicator you would like to use, please post it.
　　I will give priority.


Test mode is the alpha version.
　　Otherwise it is the latest version.
　　It includes content previously submitted.
　　I will decide whether to continue development of the test mode or not, depending on the response.
　
Enjoy the holidays and have a happy new year!

Hello funchi
I tried many indicators and it gave me this result.
The time does not change and only zeros appear.
Thank you

Sorry, I fixed it, the problem was with local vs server timing.
bracias

funchi wrote: Sat Dec 30, 2023 5:20 pm About the simulation,
RESET
It was difficult to use, so we made major changes.
post1295530600.html#p1295530600
post1295530601.html#p1295530601






New Overview
　　Simulate the performance of trading strategies created with FNC_DB2.
　　Simulate each currency pair based on the FNC_DB2 template.


procedure
Prepare a chart window for FNC_DB2.
　　Create a trading strategy with FNC_DB2. Or use one already created.
　　Apply the template to the chart window.
　　Deactivate automated trading.
　　Set the "Testing mode" parameter of "FNC_DB2" to "true".

Prepare a chart window of the currency pair to be simulated.
　　Open one new chart window.
　　Apply the template for your trading strategy.
　　Set the currency pair.
　　Set the entry/exit time frame.
　　Add the "FNC_DB2_Simulation" indicator.
　　Set the "MagicNumber" parameter for "FNC_DB2_Simulation".

Preparation complete.

Start the simulation.
　　If "O" appears in "FNC_DB2", the currency pair can be simulated.
　　Click the "(MagicNumber)" button in the upper left corner in "FNC_DB2_Simulation".
　　The result will be displayed in the upper left corner in "FNC_DB2_Simulation".

Switch currency pairs.
　　Change the currency pair for "FNC_DB2_Simulation".
　　If "O" appears in "FNC_DB2", the currency pair can be simulated.
　　Click the "(MagicNumber)" button in "FNC_DB2_Simulation.
　　The results will be displayed in the upper left corner of "FNC_DB2_Simulation".

Restrictions are as follows,
　　Only one currency pair can be simulated at a time.
　　Of course, only the "FNC_" indicator.
　　EA (FNC_DB2_EA_) functions cannot be simulated.

Conditions that prevent correct simulation are as follows,
　　Use redraw type indicator.
　　Use the current candlestick as the decision.
　　Use an entry/exit time frame of 4 hours or longer.

Future issues/problems include the following,
　　Poor response.
　　When using it, it is recommended to use "MT4" - "Tools" - "Options" - "Max bars" at about 1000.
　　Some indicators have a limited number of bars.
　　Parameters that set local time need to be changed to server time.

Indicators that cannot be used are as follows,
　　FNC_Candle
　　FNC_TradingSymbols
　　FNC_CCFp
　　FNC_Ku-chart
　　FNC_CSS
　　FNC_SignalBox
　　FNC_SignalManually

Test mode is the alpha version.
　　Otherwise it is the latest version.
　　It includes content previously submitted.
　　I will decide whether to continue development of the test mode or not, depending on the response.
　
Enjoy the holidays and have a happy new year!