just in case you were unsure which way US100 would go at London open - very helpfulmrtools wrote: Fri Jul 02, 2021 4:57 am This is an updated version of qqe polychromatic(pcm) smooth. The pcm is smoothed with jurik and the qqe smoothing factor is using ema for it's calculations. Anyway code should pretty much be optimized and faster. There is arrows and alerts on signal and zero cross.
mrtools wrote: Fri Jul 02, 2021 4:57 am This is an updated version of qqe polychromatic(pcm) smooth.
Good insight mate. Pepperstone doesn't give me US100 but a NASDAQ100. In any case, I'd be taking any up signal on our new QQE indicator, on any timeframejosi wrote: Fri Jul 02, 2021 9:47 pm just in case you were unsure which way US100 would go at London open - very helpful
you wouldn't know it as it is based in Germany - called Qtrade
Thanks man, good knowing they offer a range of securities for you guysjosi wrote: Fri Jul 02, 2021 10:12 pm you wouldn't know it as it is based in Germany - called Qtrade
if you look at this - prospects for up don't seem as rosy today - let's see whether the indicator has predictive qualities (screenshot 1 before London opening)
Hi Sirmrtools wrote: Thu Aug 09, 2018 6:54 am This is qqe of cci same as the others except this version using cci.
.... very helpful....Yes, if you talk about the trendline. Don't get me wrong, the indicator in the subwindow is doing a good job following price action, but then, if I had to watch the bits and pieces of what it is doing, I'd forget about placing an order and price action is already on the way without me....josi wrote: Fri Jul 02, 2021 9:47 pm just in case you were unsure which way US100 would go at London open - very helpful
Pardon me Mr. Tools, I assumed the thumps up button is for thanking someone and clicked on it and only later did I realize this was to report a post.mrtools wrote: Sun May 20, 2018 9:10 am Don't think this has been posted it,s a mt4 version of the mt5 version posted by Mladen, except with this version you can use a choice of 9 different moving averages to smooth the rsi, also has all the price options too.
Code: Select all
//@version=4
//By Glaz, Modified
//
study("QQE MOD")
RSI_Period = input(6, title='RSI Length')
SF = input(5, title='RSI Smoothing')
QQE = input(3, title='Fast QQE Factor')
ThreshHold = input(3, title="Thresh-hold")
//
src = input(close, title="RSI Source")
//
//
Wilders_Period = RSI_Period * 2 - 1
Rsi = rsi(src, RSI_Period)
RsiMa = ema(Rsi, SF)
AtrRsi = abs(RsiMa[1] - RsiMa)
MaAtrRsi = ema(AtrRsi, Wilders_Period)
dar = ema(MaAtrRsi, Wilders_Period) * QQE
longband = 0.0
shortband = 0.0
trend = 0
DeltaFastAtrRsi = dar
RSIndex = RsiMa
newshortband = RSIndex + DeltaFastAtrRsi
newlongband = RSIndex - DeltaFastAtrRsi
longband := RSIndex[1] > longband[1] and RSIndex > longband[1] ?
max(longband[1], newlongband) : newlongband
shortband := RSIndex[1] < shortband[1] and RSIndex < shortband[1] ?
min(shortband[1], newshortband) : newshortband
cross_1 = cross(longband[1], RSIndex)
trend := cross(RSIndex, shortband[1]) ? 1 : cross_1 ? -1 : nz(trend[1], 1)
FastAtrRsiTL = trend == 1 ? longband : shortband
////////////////////
length = input(50, minval=1, title="Bollinger Length")
mult = input(0.35, minval=0.001, maxval=5, step=0.1, title="BB Multiplier")
basis = sma(FastAtrRsiTL - 50, length)
dev = mult * stdev(FastAtrRsiTL - 50, length)
upper = basis + dev
lower = basis - dev
color_bar = RsiMa - 50 > upper ? #00c3ff : RsiMa - 50 < lower ? #ff0062 : color.gray
//
// Zero cross
QQEzlong = 0
QQEzlong := nz(QQEzlong[1])
QQEzshort = 0
QQEzshort := nz(QQEzshort[1])
QQEzlong := RSIndex >= 50 ? QQEzlong + 1 : 0
QQEzshort := RSIndex < 50 ? QQEzshort + 1 : 0
//
Zero = hline(0, color=color.white, linestyle=hline.style_dotted, linewidth=1)
////////////////////////////////////////////////////////////////
RSI_Period2 = input(6, title='RSI Length')
SF2 = input(5, title='RSI Smoothing')
QQE2 = input(1.61, title='Fast QQE2 Factor')
ThreshHold2 = input(3, title="Thresh-hold")
src2 = input(close, title="RSI Source")
//
//
Wilders_Period2 = RSI_Period2 * 2 - 1
Rsi2 = rsi(src2, RSI_Period2)
RsiMa2 = ema(Rsi2, SF2)
AtrRsi2 = abs(RsiMa2[1] - RsiMa2)
MaAtrRsi2 = ema(AtrRsi2, Wilders_Period2)
dar2 = ema(MaAtrRsi2, Wilders_Period2) * QQE2
longband2 = 0.0
shortband2 = 0.0
trend2 = 0
DeltaFastAtrRsi2 = dar2
RSIndex2 = RsiMa2
newshortband2 = RSIndex2 + DeltaFastAtrRsi2
newlongband2 = RSIndex2 - DeltaFastAtrRsi2
longband2 := RSIndex2[1] > longband2[1] and RSIndex2 > longband2[1] ?
max(longband2[1], newlongband2) : newlongband2
shortband2 := RSIndex2[1] < shortband2[1] and RSIndex2 < shortband2[1] ?
min(shortband2[1], newshortband2) : newshortband2
cross_2 = cross(longband2[1], RSIndex2)
trend2 := cross(RSIndex2, shortband2[1]) ? 1 : cross_2 ? -1 : nz(trend2[1], 1)
FastAtrRsi2TL = trend2 == 1 ? longband2 : shortband2
//
// Zero cross
QQE2zlong = 0
QQE2zlong := nz(QQE2zlong[1])
QQE2zshort = 0
QQE2zshort := nz(QQE2zshort[1])
QQE2zlong := RSIndex2 >= 50 ? QQE2zlong + 1 : 0
QQE2zshort := RSIndex2 < 50 ? QQE2zshort + 1 : 0
//
hcolor2 = RsiMa2 - 50 > ThreshHold2 ? color.silver :
RsiMa2 - 50 < 0 - ThreshHold2 ? color.silver : na
plot(FastAtrRsi2TL - 50, title='QQE Line', color=color.white, transp=0, linewidth=2)
plot(RsiMa2 - 50, color=hcolor2, transp=50, title='Histo2', style=plot.style_columns)
Greenbar1 = RsiMa2 - 50 > ThreshHold2
Greenbar2 = RsiMa - 50 > upper
Redbar1 = RsiMa2 - 50 < 0 - ThreshHold2
Redbar2 = RsiMa - 50 < lower
plot(Greenbar1 and Greenbar2 == 1 ? RsiMa2 - 50 : na, title="QQE Up", style=plot.style_columns, color=#00c3ff, transp=0)
plot(Redbar1 and Redbar2 == 1 ? RsiMa2 - 50 : na, title="QQE Down", style=plot.style_columns, color=#ff0062, transp=0)