rsistoch wrote: Thu Jan 01, 2026 7:39 am Happy New Year Funchi-san and everyone.
I hope profits come to everyone in the new year.

I have one question: DB has been continuously showing an expired and not send alert anymore since we entered 2026.
I’m not sure whether this issue is caused by the broker or by DB itself.
Could you please check this?

I am currently using the latest DB version from page 1.
Thank you.

The download is now available.
Post #1: post1295507591.html#p1295507591

Dear Mr Funchi,

Happy new year 2026 to you! I have attached two images; one is on the graph while another one is FNC.

I was trying to find the FNC indicator for the triangle (as shown in the graph), is it called FNC_TRIANGLE_TO_TRIANGLE?

Is the setting for the period is correct?

I think all the FNC indicator seems okay.

newbietrader1 wrote: Fri Jan 02, 2026 7:06 pm Dear Mr Funchi,

Happy new year 2026 to you! I have attached two images; one is on the graph while another one is FNC.

I was trying to find the FNC indicator for the triangle (as shown in the graph), is it called FNC_TRIANGLE_TO_TRIANGLE?

Is the setting for the period is correct?

I think all the FNC indicator seems okay.

For “FNC_Triangle_to_Triangle”, please refer to post #1.
If you have any further questions, please post again.
With regard to parameter settings, you should follow the trading strategy you wish to implement, if you have one.
In addition, it would be helpful if you could clearly specify which parameter settings your question relates to, as this makes it easier to provide an answer.

funchi wrote: Sat Dec 20, 2025 2:22 pm A new signal indicator has been added.

• FNC_PriceAction

Hi Funchi-san.
Can you add additional conditions to filter out noisy signals for FNC PA?

UP condition:

The previous candle is bearish.

The signal candle is bullish.

The signal candle has a Low lower than the Low of the previous candle.

DOWN condition:

The opposite of the UP condition.

FLAT condition:

When the previous candle is bearish (or bullish) and:

The signal candle does not create a Lower Low (or Higher High)
Or the signal candle does create a Lower Low (or Higher High) but is bearish (or bullish).
post1295578047.html#p1295578047

funchi wrote: Sat Jan 03, 2026 11:50 am For “FNC_Triangle_to_Triangle”, please refer to post #1.
If you have any further questions, please post again.
With regard to parameter settings, you should follow the trading strategy you wish to implement, if you have one.
In addition, it would be helpful if you could clearly specify which parameter settings your question relates to, as this makes it easier to provide an answer.

Hi Mr Funchi,

As we can see, the indicator settings for the Semafor+123 Triangle BT, there are 3 period settings, which is period 1, 2 and 3.
I hope to have an FNC indicator which have similar functionality as this indicator, so i was wondering the FNC_Triangle_to_Triangle, are they the same indicator.

I was checking at the settings of FNC_Triangle_to_Triangle, it only shows Arrow period and 2nd dot period.

I want to apply the indicator settings (graph) to the FNC DB settings, is like whenever the signal appear (blue), FNC DB will show signal up, while the signal appear (pink), FNC DB will show signal down.

I was playing around with the settings and set the Arrow period and 2nd dot period, not sure if this is correct, but the signal is not showing up. I input the number to the FNC_TRIANGLE_TO_TRIANGLE, follow the settings from the Semafor+123 Triangle BT, which is 20, 80, but no signal showing up.

Are both indicator the same? If not, can Mr Funchi create one similar to this? If yes, perhaps you may correct my understanding? Thank you.

rsistoch wrote: Sat Jan 03, 2026 5:28 pm UP condition:
The signal candle is bullish.
DOWN condition:
The opposite of the UP condition.

I would appreciate it if you could clearly indicate any additional conditions or modified conditions so that they are easy to identify.

newbietrader1 wrote: Mon Jan 05, 2026 4:44 am As we can see, the indicator settings for the Semafor+123 Triangle BT, there are 3 period settings, which is period 1, 2 and 3.
I hope to have an FNC indicator which have similar functionality as this indicator, so i was wondering the FNC_Triangle_to_Triangle, are they the same indicator.

I was checking at the settings of FNC_Triangle_to_Triangle, it only shows Arrow period and 2nd dot period.

I want to apply the indicator settings (graph) to the FNC DB settings, is like whenever the signal appear (blue), FNC DB will show signal up, while the signal appear (pink), FNC DB will show signal down.

I was playing around with the settings and set the Arrow period and 2nd dot period, not sure if this is correct, but the signal is not showing up. I input the number to the FNC_TRIANGLE_TO_TRIANGLE, follow the settings from the Semafor+123 Triangle BT, which is 20, 80, but no signal showing up.

Are both indicator the same? If not, can Mr Funchi create one similar to this? If yes, perhaps you may correct my understanding? Thank you.

I do not know about the “Semafor+123 Triangle BT” indicator.
As stated in my previous reply, please confirm by yourself whether they are the same or not.

It is possible to create a new signal indicator, but please post detailed information about under what conditions and what kind of signals you would like to have displayed.

Also, isn’t the Triangle the 2nd Dot?
Also, as I mentioned in a previous post, as long as you use Semafor, the same issues will continue to accompany it.
post1295577939.html#p1295577939

funchi wrote: Mon Jan 05, 2026 8:57 am I would appreciate it if you could clearly indicate any additional conditions or modified conditions so that they are easy to identify.

I understand. I will pay closer attention next time.
Thank you.

funchi wrote: Mon Jan 05, 2026 9:04 am I do not know about the “Semafor+123 Triangle BT” indicator.
As stated in my previous reply, please confirm by yourself whether they are the same or not.

It is possible to create a new signal indicator, but please post detailed information about under what conditions and what kind of signals you would like to have displayed.

Also, isn’t the Triangle the 2nd Dot?
Also, as I mentioned in a previous post, as long as you use Semafor, the same issues will continue to accompany it.
post1295577939.html#p1295577939

Hi Mr Funchi,

Attached the images for your previous examples of triangle post.

When I try to compare both images triangle, it seems the period settings are slightly different.

1) For fnc_triangle_to_triangle , it has 2 period settings, one is big arrow (supposed 576, normally), and another one is 2nd dot (we set based on our trading strategy). - only 2 period

2) For another example, I saw in the FNC table (2dot A10, 2dotL-M, 2dot L-S, 2dot M-S). I believe each 2nd Dot we need to put our own value for own strategy. - seems to have 3 period settings

As I saw both triangle strategy, with different settings. Sometimes triangle is formed not necessary from the (576 period arrow).

If possible to create a new signal indicator, I think the simple approach is when the triangle is formed, a signal is issued, either a sell or buy signal. For example, the semafor+123 triangleBT, Blue triangle indicates buy signal, while purple indicates sell signal. The triangle period 1 (20), period 2 (20), period 3 (80).

I have attached both indicator for your reference.


I also saw another previous post, also saw the triangle indicator, but with semafor and 2nd dot settings, not sure if my understanding is correct (576, 144, 36)

My apologies if there is any confusion arise from my question.

I hope you have a good day ahead!

funchi wrote: Mon Jan 05, 2026 8:57 am I would appreciate it if you could clearly indicate any additional conditions or modified conditions so that they are easy to identify.

Sorry Funchi-san.

Can you update the FNC PA indicator once again?

Please remove the condition that checks whether the previous candle is bearish or bullish.

Keep all the remaining conditions unchanged.

Thank you.