1337br wrote: Fri Aug 22, 2025 11:28 pm Hello funchi
Example 1:
a) On m15, a sell signal appears, either a downtrend or a shooting star.
b) On m5, a sell signal appears.
c) On m1, a sell signal appears, following the other timeframes.

Example 2:
a) On m15, the candles are arriving in a straight line (showing past resistance).
b) On m5, the price approaches the line and gives a sell signal, either a downtrend or a shooting star.
c) On m1, a sell signal appears.

I've added the signal indicator "FNC_Apollo_Smart_Level_Trader".
Please download it from Post #1.
post1295507591.html#p1295507591

While I created the signal indicator based on the usage you shared, I'm a little concerned about how it behaves.
It displays the final state as a signal, rather than combining different conditions to generate a signal.

I'm not sure if it works exactly the way you, 1337br, had in mind.
If anything seems off, please let me know.

Waddah Attar Explosion (WAE),
4hr timeframe signals would be very good to scalp,
Appreciate all the work

funchi wrote: Thu Aug 21, 2025 2:14 pm We have added VWAP to the BEATS V5 signal dashboard.

Please make sure to use the latest version of the dashboard:
post1295507591.html#p1295507591

You can download the template from the link below.
The template that includes VWAP is "BEATS V5_DB_Detail_M30.tpl":
post1295557384.html#p1295557384

Thank you! Please upload the dashboard compressed package... The dashboard did not find the compressed package... Only the template... Thank you for your contribution...

Eis wrote: Sat Aug 23, 2025 11:42 am Waddah Attar Explosion (WAE),
4hr timeframe signals would be very good to scalp,
Appreciate all the work

YES!!

funchi wrote: Sat Aug 23, 2025 6:42 am Yes. I reversed the fast and slow periods in the "FNC_MA_Cross" indicator. I thought it would be a smarter solution than using "Opposite" in "FNC_DB".

interesting. Would you tell me how to use 1% risk of my account? When I was set on the auto Lot, the expert did not work. always work with a fixed lot.Thanks.

asgariHoo wrote: Sat Aug 23, 2025 4:45 pm interesting. Would you tell me how to use 1% risk of my account? When I was set on the auto Lot, the expert did not work. always work with a fixed lot.Thanks.

I only used the attached EasyOrder tool.
FNC_DB_EA does not automatically calculate the position size unless a Stop Loss (SL) is set.

It is recommended not to set the “One-way commission per lot” parameter.
For some instruments, it can cause errors in the lot size calculation.
This is simply based on Position Sizer, with unnecessary features hidden and the interface made more compact.
https://www.earnforex.com/metatrader-ex ... ion-Sizer/

Hi, first of all, im grateful for the effort and contributions to all the members and im appreciate. Thanks funchi for creating such wonderful system.

I've been testing the BEATV5 system, I have some questions. Please check the image attached.

As I can understand the system, we can modify the entry & exit signal in the FNC_DB, based on different column (FNC dashboard
). However, I test in the demo account and found out that the entry is not following the signal (delay), and the exit signal, which is scissors/support/resistance (it seems never hit), but then it hit the stop loss. You may look at the entry & exit (invalid) chart image. Suppose entry and exit should be around the Red arrow, if following the FNC_DB parameter, or my parameter settings are wrong?

For entry and exit condition, I have set my Z support/resistant slightly different (image attached). But most of the time the exit condition (even when scissors and opposite signal has appeared), it still couldn't auto exit the position.

Sorry for the issue and trouble, hope I can get some experts advise from here. Thank you very much and have a nice weekend!

newbietrader1 wrote: Sun Aug 24, 2025 5:43 am Hi, first of all, im grateful for the effort and contributions to all the members and im appreciate. Thanks funchi for creating such wonderful system.

I've been testing the BEATV5 system, I have some questions. Please check the image attached.

As I can understand the system, we can modify the entry & exit signal in the FNC_DB, based on different column (FNC dashboard
). However, I test in the demo account and found out that the entry is not following the signal (delay), and the exit signal, which is scissors/support/resistance (it seems never hit), but then it hit the stop loss. You may look at the entry & exit (invalid) chart image. Suppose entry and exit should be around the Red arrow, if following the FNC_DB parameter, or my parameter settings are wrong?

For entry and exit condition, I have set my Z support/resistant slightly different (image attached). But most of the time the exit condition (even when scissors and opposite signal has appeared), it still couldn't auto exit the position.

Sorry for the issue and trouble, hope I can get some experts advise from here. Thank you very much and have a nice weekend!

The indicator "Zee_SupportResistance V1.0" is a repainting indicator.

Regarding USDJPY, a valid Support level can only be confirmed after August 21.
Until then, the scissors symbol appears and disappears, and Resistance is also plotted inconsistently.

Therefore, an entry from the red arrow is not possible under these conditions.

For any questions related to BEATS V5, it would be more accurate to ask in the BEATS V5-specific topic/thread.

As for the usage of FNC_DB, I’m unable to say whether your setup is correct or not, because I don’t know what exactly you are trying to achieve.
Also, since no template was provided, I cannot investigate further.

If you have any questions about FNC_DB, feel free to ask.

Hi, good day Mr Funchi,

First of all, thanks for explaining the details to me, im much appreciated.

I understand the support level might appear/ disappear after awhile and not instantly, it will truly stay 'appear' when the uptrend is still ongoing.

I have drawn a blue arrow, which is all the indicator aligned and it should have enter the position, instead of entering quite far from it.

I'm testing my condition of ENTRY with few signals aligned:

1) Zee S/R -(check method - support/resistant) - Base Direction (1st column)
2) adx trend - same as base direction (3rd column)
3) waddah - same as base direction (4th column)
4) obv histo - same as base direction (5th column)

and EXIT with

1) Zee S/R (check method - support/resistant) - (1st column) - opposite direction

2) Zee S/R (check method - scissors) - (2nd column) - opposite direction

(The signal match ratio for EXIT (GE%), I set to 50%, is that correct? Either one of the signal appear, it will auto exit?)


I also come across another template with simplified version, which as 2 column, M30 beatv5 & Shizu M30. I saw the Shizu M30 parameter settings for exit is similar to mine.


I have attached my template for Mr Funchi to investigate and check, whether my settings of parameter are correct.

Thank you for your guidance and patience. I wish you good and healthy as always.

funchi wrote: Sat Aug 23, 2025 11:27 am I've added the signal indicator "FNC_Apollo_Smart_Level_Trader".
Please download it from Post #1.
post1295507591.html#p1295507591

While I created the signal indicator based on the usage you shared, I'm a little concerned about how it behaves.
It displays the final state as a signal, rather than combining different conditions to generate a signal.

I'm not sure if it works exactly the way you, 1337br, had in mind.
If anything seems off, please let me know.

Thank you very much for your dedication. I will test it soon.

The basic idea is this: use a signal on a larger timeframe as a reference and wait for a signal in the same direction on a smaller timeframe.

Example: Buy signals are:

Uptrend, Buy

Sell signals are:

Downtrend, Sell

Interpretation signals:

Close all buy, close all sell

Reversal and shooting star

Practical entry example:

On the M5 chart, it says "uptrend" or "buy"...
As a reference, wait for a buy or uptrend signal to appear on the M1 chart.