lucmat wrote: Mon Jun 09, 2025 6:17 pm Hello funchi,
I think I've made some mistakes.
I attached 4 indicators, but only two send directions.
May you help me?
Thanks in advance

Lucmat

It is unclear how you have set the parameters,
The first thing to check is that the ‘Signal column number’ must be a unique number.

Hi, I would like to know if it's possible to create an MT5 EA with the FNC_XU v010_XARD_Signals and just the 3 indicators needed in the XU v010 like your indicator instruction said, but uses only TP on reversal with no SL

Rule is very simple: when box and big arrow both show down, it waits for the signal at bottom to also show red to enter sell and and it closes trade immediately when oppisite big arrow appear, not box just big arrow and then it waits for box to turn signal up then it looks for first blue on bottom signal.
In first false signal case with sell trade when trades turns around before showing opposite big arrow, it just looks for second red to enter 2de trade untill big arrow appear on opposite. Buy is same rules.
I remember there was a second small problem, but I couldn't remember what it was, I would really appreciate it if you can create an ea on this, and if not I would also understand, it makes around 20 in profit per day on 0.02 volume on 12 charts every day, because so much is open at same time it even each other out and I saw max floating minus was around 30 in last 2 weeks.

I would keep doing it manual but I just had to ask here if it's possible to make an ea since I dont get any sleep in day and night for staying awake looking at the charts which is not healthy at all.

funchi wrote: Sun Jun 08, 2025 9:20 am If you want to make your system greedy,
Post your trading systems here.
mt4-trading-systems-f579518.html

LegendaryWvW wrote: Mon Jun 09, 2025 9:07 pm Hi, I would like to know if it's possible to create an MT5 EA with the FNC_XU v010_XARD_Signals and just the 3 indicators needed in the XU v010 like your indicator instruction said, but uses only TP on reversal with no SL

> In first false signal case with sell trade when trades turns around before showing opposite big arrow, it just looks for second red to enter 2de trade untill big arrow appear on opposite. Buy is same rules.
I do not understand what this means.
It is not clear whether the other side is an up or down arrow.

Post your trading systems here.
There are many other questions we would like to ask.
mt4-trading-systems-f579518.html

It's Semafor, so a lot of things don't work the way I want them to, but I'm interested.

Is it an EA for dashboards?
Is it an EA for a single stock?

funchi wrote: Mon Jun 09, 2025 10:21 pm > In first false signal case with sell trade when trades turns around before showing opposite big arrow, it just looks for second red to enter 2de trade untill big arrow appear on opposite. Buy is same rules.
I do not understand what this means.
It is not clear whether the other side is an up or down arrow.

Post your trading systems here.
mt4-trading-systems-f579518.html

It's Semafor, so a lot of things don't work the way I want them to, but I'm interested.

Is it an EA for dashboards?
Is it an EA for a single stock?

Sorry I'm not very good at coding so I can't create the EA that's why I'm asking the professional, also because you created the amazing signals indicator it should be easier for you to understand. And yes sorry didn't explain it very good.

So let's say it's giving a sell signal, big arrow and big box down, now ea wait for signal indicator at bottom to turn red for sell to enter, exit point will be on opposite big arrow, but before big arrow shows, trades turn around and bottom signal indicator goes yellow or blue, ea only waits for bottom indicator to turn red again for second entry on same direction, almost like martingail but keeping volume the same, and because it only trades on big arrow and big box for entry and big arrow for exit it is very strong chance of moving the right direction, at most I had like 2 entries on one direction before it showed signal for opposite to exit

Also I would only recommend this on currency pairs since arrows repaint and pairs like gold is very unpredictable.
It can be an greedy system ea or just a single file ea to load on pair, as long as it can open and close the trades automatically

Hope it makes sense now

lucmat wrote: Mon Jun 09, 2025 6:17 pm Hello funchi,
I think I've made some mistakes.
I attached 4 indicators, but only two send directions.
May you help me?
Thanks in advance

Lucmat

Hi Lucmat, be sure FNC_DB_Development_Kit folders exist in related folder in MT folders. I guess you have not copy them to MT folder

LegendaryWvW wrote: Mon Jun 09, 2025 10:48 pm Sorry I'm not very good at coding so I can't create the EA that's why I'm asking the professional, also because you created the amazing signals indicator it should be easier for you to understand. And yes sorry didn't explain it very good.

So let's say it's giving a sell signal, big arrow and big box down, now ea wait for signal indicator at bottom to turn red for sell to enter, exit point will be on opposite big arrow, but before big arrow shows, trades turn around and bottom signal indicator goes yellow or blue, ea only waits for bottom indicator to turn red again for second entry on same direction, almost like martingail but keeping volume the same, and because it only trades on big arrow and big box for entry and big arrow for exit it is very strong chance of moving the right direction, at most I had like 2 entries on one direction before it showed signal for opposite to exit

Also I would only recommend this on currency pairs since arrows repaint and pairs like gold is very unpredictable.
It can be an greedy system ea or just a single file ea to load on pair, as long as it can open and close the trades automatically

Hope it makes sense now

Please verify the operation if this is OK.
I have not tested it either.
It will take time and I would appreciate your cooperation.

Please let me know if my understanding is wrong.

Operating specifications,

Almost the same as ‘XU v010’.
XU SEMA SML’, “XU HA Candles+XMAv5” and “XU DAILY OPEN LINE” are not used.

Reference was made to v65m.
The only thing that changes is the various indicators for when the Semafor (reversal) is confirmed.

I am not particular about this, but if you are, I will consider it.

Related URLs
post1295567085.html#p1295567085
post1295567230.html#p1295567230

funchi wrote: Sun Jun 08, 2025 9:20 am If you want to make your system greedy,
Post your trading systems here.

mt4-trading-systems-f579518.html

I have an idea to contribute to you. If my idea is wrong or bothers you, please forgive me.
For those who have a completely new system, please post it as a new topic so that everyone can contribute and improve it.
For those who are like me, combining systems on this forum such as XARD system, VZU system, BEATS V5.... using what is available from those who have shared before, simply adding or removing a few indicators to suit trading style, please allow us to share in your topic. That is also a way to respect those who have created those great trading systems and also not dilute the forum. People will not hesitate to share their ideas.
When having idea to create DB it is best to upload indicators along with template as zip file, should limit using repaint indicators, they will not bring consistent results in long term.
Thank you Funchi san!!!

funchi wrote: Tue Jun 10, 2025 9:29 am Please verify the operation if this is OK.
I have not tested it either.
It will take time and I would appreciate your cooperation.

Please let me know if my understanding is wrong.

Operating specifications,

Almost the same as ‘XU v010’.
XU SEMA SML’, “XU HA Candles+XMAv5” and “XU DAILY OPEN LINE” are not used.

Reference was made to v65m.
The only thing that changes is the various indicators for when the Semafor (reversal) is confirmed.

I am not particular about this, but if you are, I will consider it.

Apart from the results, it works according to specifications but has many problems. (Shortly before today's European market)

Problems and glitches

1. Large arrow appears and does not close immediately.
2. Large arrow appears and exits, but immediately re-enters.
3. If the square arrow is updated after entry, I don't think it will make an additional entry. (Unconfirmed)

1 and 2 are now supported.

funchi wrote: Tue Jun 10, 2025 5:14 pm Apart from the results, it works according to specifications but has many problems. (Shortly before today's European market)

Problems and glitches

1. Large arrow appears and does not close immediately.
2. Large arrow appears and exits, but immediately re-enters.
3. If the square arrow is updated after entry, I don't think it will make an additional entry. (Unconfirmed)

1 and 2 are now supported.

Thank you very much for helping me out on this @funchi
I really appreciate your help, will test out and see how results go and come back with feedback

Hello funchi,
with the new development kit you posted, I'm finalizing the construction of automatic signals for the trading system I usually use manually, so I can share it with other users. It would be very helpful for me if we could get the "TDI-RSI-Dz-VHF_Adaptive_alerts" indicator in FNC_ format, or instructions on how to build it independently.
Also, I tried the FNC_semafor and FNC_2nd_dot, but they don't generate signals—in fact, they even block signals from other indicators. Can I ask for some help?
Thanks in advance

Lucmat