Cagliostro wrote: Mon May 12, 2025 9:57 am TDI CROSS MTF


image_2025-05-12_015515594.png


The TDI CROSS is designed to provide a histogram-based representation of trend crossovers using principles derived from the Traders Dynamic Index (TDI). This indicator incorporates Multi-Timeframe (MTF) functionality and filtering options to assist in analyzing market trends.

Main Functionalities
-Triple-MA Crossover Logic: Identifies bullish and bearish signals through the crossover of a fast MA, medium MA, and slow MA applied to RSI.
-Histogram Display: Presents signals as a histogram, with colors indicating the trend state and strength, adjusted by a Level 50 filter.
-Level 50 Filter Modes: Offers three modes (No Filter, Level 50 Filter, Level 50 soft) to filter signals based on the Yellow Line’s position relative to the 50 level, including a hysteresis option to reduce noise.
-MTF Capability: Supports signal calculation on any timeframe (current or higher), facilitating cross-timeframe trend analysis.
-TDI Trend Label: Displays a label aligned with TDI’s trend bias, where the direction label’s color reflects the histogram’s color scheme.

Reading the Histogram Colors
The histogram’s colors indicate the trend state and signal strength:
-Light Green (Bullish): Represents a basic bullish crossover when No Filter is selected.
-Dark Green (Strong Bullish): Indicates a trend-aligned bullish signal (Yellow Line ≥ 50) when Filters are active.
-Light Red (Bearish): Represents a basic bearish crossover when No Filter is selected.
-Dark Red (Strong Bearish): Indicates a trend-aligned bearish signal (Yellow Line < 50) when Filters are active.
-Grey (Neutral): Shown when no crossover signal is present or when the trend conditions are not met.

V1.0 Alpha
TDI CROSS HISTO.ex5

Cagliostro wrote: Mon May 12, 2025 9:57 am TDI CROSS MTF


image_2025-05-12_015515594.png


The TDI CROSS is designed to provide a histogram-based representation of trend crossovers using principles derived from the Traders Dynamic Index (TDI). This indicator incorporates Multi-Timeframe (MTF) functionality and filtering options to assist in analyzing market trends.

Main Functionalities
-Triple-MA Crossover Logic: Identifies bullish and bearish signals through the crossover of a fast MA, medium MA, and slow MA applied to RSI.
-Histogram Display: Presents signals as a histogram, with colors indicating the trend state and strength, adjusted by a Level 50 filter.
-Level 50 Filter Modes: Offers three modes (No Filter, Level 50 Filter, Level 50 soft) to filter signals based on the Yellow Line’s position relative to the 50 level, including a hysteresis option to reduce noise.
-MTF Capability: Supports signal calculation on any timeframe (current or higher), facilitating cross-timeframe trend analysis.
-TDI Trend Label: Displays a label aligned with TDI’s trend bias, where the direction label’s color reflects the histogram’s color scheme.

Reading the Histogram Colors
The histogram’s colors indicate the trend state and signal strength:
-Light Green (Bullish): Represents a basic bullish crossover when No Filter is selected.
-Dark Green (Strong Bullish): Indicates a trend-aligned bullish signal (Yellow Line ≥ 50) when Filters are active.
-Light Red (Bearish): Represents a basic bearish crossover when No Filter is selected.
-Dark Red (Strong Bearish): Indicates a trend-aligned bearish signal (Yellow Line < 50) when Filters are active.
-Grey (Neutral): Shown when no crossover signal is present or when the trend conditions are not met.

V1.0 Alpha
TDI CROSS HISTO.ex5

Cagliostro wrote: Mon May 12, 2025 9:57 am TDI CROSS MTF


image_2025-05-12_015515594.png


The TDI CROSS is designed to provide a histogram-based representation of trend crossovers using principles derived from the Traders Dynamic Index (TDI). This indicator incorporates Multi-Timeframe (MTF) functionality and filtering options to assist in analyzing market trends.

Main Functionalities
-Triple-MA Crossover Logic: Identifies bullish and bearish signals through the crossover of a fast MA, medium MA, and slow MA applied to RSI.
-Histogram Display: Presents signals as a histogram, with colors indicating the trend state and strength, adjusted by a Level 50 filter.
-Level 50 Filter Modes: Offers three modes (No Filter, Level 50 Filter, Level 50 soft) to filter signals based on the Yellow Line’s position relative to the 50 level, including a hysteresis option to reduce noise.
-MTF Capability: Supports signal calculation on any timeframe (current or higher), facilitating cross-timeframe trend analysis.
-TDI Trend Label: Displays a label aligned with TDI’s trend bias, where the direction label’s color reflects the histogram’s color scheme.

Reading the Histogram Colors
The histogram’s colors indicate the trend state and signal strength:
-Light Green (Bullish): Represents a basic bullish crossover when No Filter is selected.
-Dark Green (Strong Bullish): Indicates a trend-aligned bullish signal (Yellow Line ≥ 50) when Filters are active.
-Light Red (Bearish): Represents a basic bearish crossover when No Filter is selected.
-Dark Red (Strong Bearish): Indicates a trend-aligned bearish signal (Yellow Line < 50) when Filters are active.
-Grey (Neutral): Shown when no crossover signal is present or when the trend conditions are not met.

V1.0 Alpha - Logging fixed.
TDI CROSS HISTO.ex5

Cagliostro wrote: Sun May 11, 2025 6:59 am BLACK ZONES
Black Zones is a converted and optimized support and demand indicator inspired by the popular MT4 Shved Supply and Demand. It is designed to identify key liquidity zones on any forex, indices, metals or crypto chart. By leveraging fractal analysis and ATR, it pinpoints high-probability reversal zones, helping traders make informed decisions. Version 1.0 enhances the original logic with a robust ATR filter, a new level scanner, an improved MTF support, and a toggle button.

Features:
-Accurate Zone Detection: Identifies support/resistance zones using fast and slow fractals.
-Multi-Timeframe (MTF) Support: Displays higher timeframe zones on lower timeframe charts.
-Retest Counter: Tracks zone retests for strength assessment (Proven, Verified, etc.).
-Customizable Settings: Adjust zone appearance, ATR fuzz factor, and merge/extend options.
-Toggle Button: Show/hide zones with a single click for chart clarity.
-Alerts & Notifications: Pop-ups, sounds, and mobile alerts for zone entries.

Cagliostro wrote: Tue May 13, 2025 6:30 am UPDATED

Cagliostro wrote: Mon May 12, 2025 9:57 am TDI CROSS MTF


image_2025-05-12_015515594.png


The TDI CROSS is designed to provide a histogram-based representation of trend crossovers using principles derived from the Traders Dynamic Index (TDI). This indicator incorporates Multi-Timeframe (MTF) functionality and filtering options to assist in analyzing market trends.

Main Functionalities
-Triple-MA Crossover Logic: Identifies bullish and bearish signals through the crossover of a fast MA, medium MA, and slow MA applied to RSI.
-Histogram Display: Presents signals as a histogram, with colors indicating the trend state and strength, adjusted by a Level 50 filter.
-Level 50 Filter Modes: Offers three modes (No Filter, Level 50 Filter, Level 50 soft) to filter signals based on the Yellow Line’s position relative to the 50 level, including a hysteresis option to reduce noise.
-MTF Capability: Supports signal calculation on any timeframe (current or higher), facilitating cross-timeframe trend analysis.
-TDI Trend Label: Displays a label aligned with TDI’s trend bias, where the direction label’s color reflects the histogram’s color scheme.

Reading the Histogram Colors
The histogram’s colors indicate the trend state and signal strength:
-Light Green (Bullish): Represents a basic bullish crossover when No Filter is selected.
-Dark Green (Strong Bullish): Indicates a trend-aligned bullish signal (Yellow Line ≥ 50) when Filters are active.
-Light Red (Bearish): Represents a basic bearish crossover when No Filter is selected.
-Dark Red (Strong Bearish): Indicates a trend-aligned bearish signal (Yellow Line < 50) when Filters are active.
-Grey (Neutral): Shown when no crossover signal is present or when the trend conditions are not met.

TDI CROSS HISTO.ex5
V1.0 Alpha - Logging fixed.

Cagliostro wrote: Sun May 11, 2025 6:59 am BLACK ZONES


image_2025-05-10_225653003.png


Black Zones is a converted and optimized support and demand indicator inspired by the popular MT4 Shved Supply and Demand. It is designed to identify key liquidity zones on any forex, indices, metals or crypto chart. By leveraging fractal analysis and ATR, it pinpoints high-probability reversal zones, helping traders make informed decisions. Version 1.0 enhances the original logic with a robust ATR filter, a new level scanner, an improved MTF support, and a toggle button.

Features:
-Accurate Zone Detection: Identifies support/resistance zones using fast and slow fractals.
-Multi-Timeframe (MTF) Support: Displays higher timeframe zones on lower timeframe charts.
-Retest Counter: Tracks zone retests for strength assessment (Proven, Verified, etc.).
-Customizable Settings: Adjust zone appearance, ATR fuzz factor, and merge/extend options.
-Toggle Button: Show/hide zones with a single click for chart clarity.
-Alerts & Notifications: Pop-ups, sounds, and mobile alerts for zone entries.

May 9 Update, download it again.
-Added Show/Hide Zones button persistency
-Improved ATR scan logic
-Improved data initialization on MT5 custom TF


Black Zones.ex5

Cagliostro wrote: Sat Mar 22, 2025 2:19 am Hello fellow traders.

I thought that could be interesting to share with you some of the MT5 stuff I am testing, researching and coding. As some of you know, I switched fully to MT5 last month, so am working to improve my MT5 arsenal.

List of Indicators
-The Oracle
-AVWAP with Bands
-Radius Trend
-X-Stoch
-KoncordePlus
-Spearman-Pearson with Entries
-Black Zones

Rules are simple.
-This is a testing lab, you don't pay to get and test stuff, it's all free.
-As per above, feedback and suggestions will be much appreciated.
-But no complaints or lamentations will be appreciated or considered.

Today's the Spring Equinox, the real start of the new year! So there is no better day to start sharing something!

The Oracle
In the shadowed depths of Delphi ancient ruins, where logic and mystery intertwine, lies The Oracle—an artifact of unfathomable power. Forged in an era when the stars whispered secrets to the bold, it transcends mere computation, unveiling glimpses of fate’s hidden currents. Its cryptic code, a relic of a lost civilization, pulses with esoteric wisdom, inviting the daring to pierce the veil of time—though its full mysteries remain tantalizingly out of reach.

It includes 7 indicators chosen, tested and optimized among hundreds in the last 4 months, including the Ehlers's Universal Strength indicator and my Rolling VWAP. Keep it at level 6 for M1/M3/M5 trading and let me know how it goes. Happy Equinox!

****Update Log for the current Month****

May 7 Update, download it again.
-Added Trend Label TF
-Improved Array compaction logic
-Improved Timer Management for multi-instances
-Added buffering for MTF Sync

May 9 Update, download it again.
-Improved initialization data checks to minimize freezes on indicator loading and TF changes.
-Added unique instance IDs to enhance multi-instance support.
-Improved buffer management to prevent data corruption and reduce memory usage.
-Optimized VWAP calculations for large TF
-Updated HTF cache
-Improved memory clean-up mechanism to match the new multi-instance architecture

The Oracle.ex5

Note: if you face issues, please use version 2.0

Oracle 2.0.ex5