funchi wrote: Fri Jun 23, 2023 2:33 pm 3xXXuma is the same as the direction of entry,
MA and TDI regardless,
If the ORDER turns the other way, it's an EXIT.

In other words,
If the order goes in the opposite direction, it is an exit.

In this case, the settings are as shown in the image below.

There are two main ways to set up an exit.

1. the match ratio is smaller than the set value.
"Signal Match ratio for Exit (%LT)".
For example,
There is no superiority or inferiority of singles,
If more than 1 out of 4 conditions are mismatched, the value is set to 100.
If two or more of the four conditions disagree, set the value to 75.

2. the match ratio is greater than the set value.
"Signal Match ratio for Exit (%GE)".
For example,
If both the A and B signals are opposite, set the value to 100.
If either the A or B signal is opposite, set the value to 50.


In this case, if only the ORDER signal turns the opposite direction,
Set "Signal Match ratio for Exit (%GE)" to 100.


Also,
I think it's probably OK, but (sorry, I'm uncertain)
I set this up conventionally.

Enter in the direction of signal 1.
The "same", "different", or "opposite" setting is based on Signal 1.
Therefore, Signal 1 is a more suitable signal for MA than for ORDER.


The rollover time is long.
During rollover, it is equivalent to unconnected.
It does nothing.

There is a schedule function.
It is better to use this one.
"FNC_dashboard_scheduler".

The others are good.

TradeXtra wrote: Fri Jun 23, 2023 4:51 pm Thank you Funchi for this review.

I want 3x Xuma to be the base signal.
How do I set any indicator I want as base signal on the 1st column?
How do I assign the columns to indicators?
I did not see that in the manual.
Can I assign any column number to any indicator?

Thanks again

TradeXtra wrote: Fri Jun 23, 2023 4:58 pm Funchi, can I trade more than one FNC-dashboard templates on the same account for different strategies?
Can I trade a xard fnc template and an x-gen fnc template in the same mt4 platform?

funchi wrote: Fri Jun 23, 2023 4:02 pm Template "FNC Greedy System_LineCross_H4_M15.tpl"

Manually draw a line,
When the line is hit, the EA will automatically trade.

You may leave the computer after drawing three lines: entry line, TP line, and SL line.
Or,
You can leave the computer after drawing two lines, the TP line and the SL line, after manually entering.
Or,
You can draw lines at important points without using the EA, and then formulate your strategy after the signal is displayed.

The signals are monitored on a 15-minute time chart.
The blue line is for buying (regardless of entry/exit)
The red line is for selling (regardless of entry/exit)

<Download>
In preparation.