DownloadRe: TradeStation Indicators

73
Dear All,

I've coded an indicator from MT4 and in Tradestation it plots the same values, thus it works fine.

The big issue is : while in MT4 is not CPU demanding in Tradestation is exactly the opposite and it tooks minutes to plot the values.

Is there a way to fix properly the attached indicator ?

Thanks in advance,
These users thanked the author AndreaTrade for the post (total 2):
alexm, Khaal

Re: TradeStation Indicators

74
Can someone please help me compile this code here?

I am a newcomer to Tradestation and I was searching for a couple of indicators I need in my analysis. I haven´t even installed TS yet, but I already see I will have trouble with this because the indicator needs to be compiled in TS (I believe something similar to metaeditor). One of the indicators I already found, the other I found only the code, but I have no clue how to compile it. I also wanted it to have an extra option in it´s settings to choose the type of volume used in the calculation. As it is now, it is hard coded to use the total volume, but I wanted to be able to choose between total volume or delta (bid-ask). The indicator I am talking about is the Weis Wave (or zig zag volume, or cumulative wave volume, or swing volume, all same thing).

Here is the code:

Code: Select all

Version 1.00 (08/09/2013)		Initial release.
Version 1.10 (10/25/2013)		Bug negative time duration when a swing spans multiple days fixed.
Version 1.11 (11/02/2013)		Correction on bug fix version 1.10.

This indicator is inspired on the Weis Wave with its cumulative wave volume. It plots a cumulative 
ZigZag volume histogram, a ZigZag line and the cumulative volume, price change and/or duration of 
the up/down swing at the swing high/low.

The ZigZag line can be based on point, percentage, ATR or UTC retracements.
The UTC retracement method is based on John R. Hill, George Pruitt, and Lundy Hill's description 
in their book The Ultimate Trading Guide, page 39: "A top pivot point is the highest price in a 
movement prior to penetration of the low of the top bar. A bottom pivot point is the lowest price 
in a movement prior to penetration of the high of the low bar." 
The UTC version is an improved version in which the highs and lows are calculated over a period. 
Longer periods make the ZigZag UTC less sensitive. The default period for the UTC is 2 bars.}


Inputs:
	Offset (0.2),
	Font_Size(10),
	HiPrice( close ),		// price field for high swings
	LoPrice( close ),		// price field for low swings
	RetraceMethod( 1 ),		// 1=Pnt, 2=%, 3=ATR, 4=UTC
	Period( 2 ),			// number of bars over which ATR or UTC is calculated
	Retrace( 0 ),			// retracement in Pnt, % or ATR multiple
	PlotVolume( true ),		// plots cumulative volume histogram
	PlotSwings( true ),		// plots ZigZag lines
	PlotVolumeText( true ),	// plots cumulative volume of up/down swing at swing high/low
	ScaleVolumeBy( 1 ),		// divides cumulative volume text by the number of this input
	PlotPriceText( false ),	// plots price change of up/down swing at swing high/low
	PlotTimeText( false ),	// plots duration of up/down swing at swing high/low
	LineWidth( 0 ),		// line width of ZigZag lines: 0,1,2,3,4,5,6
	LineStyle( tool_solid),	// line style of ZigZag lines: tool_solid, tool_dotted, tool_dashed, tool_dashed2, tool_dashed3 
	UpColor( red ),		// line color of upswings: PowerLanguage colors
	DnColor( red ),		// line color of downswings: PowerLanguage colors
	TextColor( black );		// text color: PowerLanguage colors

Vars:
	dailyTF( false ),
	dir( 0 ),
	hi( HiPrice ),
	lo( LoPrice ),
	lastLoBar( 1 ),
	lastHiBar( 1 ),
	lastHi( HiPrice ),
	lastLo( LoPrice ),
	swingHiCondition( false ),
	swingLoCondition( false ),
	vol( 0 ),
	volUp( 0 ),
	volDn( 0 ),
	barsBack( 0 ),
	x( 0 ),
	tl( 0 ),
	plotText( "" ),
	waveTxt( 0 );

// Initialize variables
dailyTF = BarType >= 2 and BarType < 5;
hi = iff( RetraceMethod = 4, Highest( HiPrice, Period ), HiPrice );
lo = iff( RetraceMethod = 4, Lowest( LoPrice, Period ), LoPrice );
vol = iff( dailyTF, Volume, Ticks);

// set initial trend direction (dir will become non-zero after the first couple of bars)
if dir = 0 then
begin
	if hi[0] > lastHi then // higher high
	begin
		lastHi = hi[0];
		lastHiBar = CurrentBar;
		if lo[0] > lo[1] then // higher low
			dir = 1; // initial trend direction is up
	end;
	if lo[0] < lastLo then // lower low
	begin
		lastLo = lo[0];
		lastLoBar = CurrentBar;
		if hi[0] < hi[1] then // lower high
			dir = -1; // initial trend direction is down
       end;
end;

// look for swing points and draw lines

if dir > 0 then // trend is up, look for new swing high
begin
	if RetraceMethod = 1 then swingHiCondition = lo[0] < lastHi - Retrace; // condition for swing high pnt
	if RetraceMethod = 2 then swingHiCondition = lo[0] < lastHi * (1 - Retrace * 0.01 ); // condition for swing high %
	if RetraceMethod = 3 then swingHiCondition = lo[0] < lastHi - ( Retrace * AvgTrueRange( Period ) ); // condition for swing high ATR
	if RetraceMethod = 4 then swingHiCondition = hi[0] < lastHi and lo[0] < lo[1]; // condition for swing high UTC

	if not swingHiCondition then
	begin
		if hi[0] > lastHi then // found a higher high
		begin
			lastHi = hi[0];
			lastHiBar = CurrentBar;
		end;
		// update cumulative volume of upswing
		volUp = 0;
		barsBack = ( CurrentBar - lastLoBar - 1 );
		for x = barsBack downto 0
		begin
			volUp = volUp + vol[x];
			if PlotVolume then
			begin
				NoPlot[x]( 2 );
				Plot1[x]( VolUp, "Volume Up" );
			end;
		end;
		// update current upswing line and text from lastLoBar
		if PlotSwings then
			TL_SetEnd_Dt( tl, datetime[0], lastHi );
		plotText = 
			iffString( PlotTimeText, iffString( dailyTF, NumToStr( CurrentBar - lastLoBar, 0 ) + " bar(s)",
				DateTimeToHMS( ( ELDateToDateTime( Date[0] ) - ELDateToDateTime( Date[CurrentBar - lastLoBar] ) ) +
				ELTimeToDateTime_s( Time_s[0] ) - ELTimeToDateTime_s( Time_s[CurrentBar - lastLoBar] ) ) ), "" ) +
			iffString( PlotVolumeText, NewLine + NumToSTr( volUp + Offset / ScaleVolumeBy, 0 ), "" ) + 
			iffString( PlotPriceText, NewLine + "+" + NumToSTr( ( lastHi - lastLo ) * PriceScale, 0 ), "" );
		Text_SetLocation_Dt( waveTxt, datetime[0], High[0] + Offset );
		Text_SetString( waveTxt, plotText );
	end
	else if swingHiCondition then // found a swing high
	begin
		// update cumulative volume of upswing
		volUp = 0;
		barsBack = ( CurrentBar - lastLoBar - 1 );
		for x = barsBack downto ( CurrentBar - lastHiBar )
		begin
			volUp = volUp + vol[x];
			if PlotVolume then
			begin
				NoPlot[x]( 2 );
				Plot1[x]( VolUp, "Volume Up" );
			end;
		end;
		// update current upswing line from lastLoBar
		if PlotSwings then
			TL_SetEnd_Dt( tl, datetime[CurrentBar - lastHiBar], lastHi );
		plotText = 
			iffString( PlotTimeText, iffString( dailyTF, NumToStr( lastHiBar - lastLoBar, 0 ) + " bar(s)",
				DateTimeToHMS( ( ELDateToDateTime( Date[CurrentBar - lastHiBar] ) - ELDateToDateTime( Date[CurrentBar - lastLoBar] ) ) +
				ELTimeToDateTime_s( Time_s[CurrentBar - lastHiBar] ) - ELTimeToDateTime_s( Time_s[CurrentBar - lastLoBar] ) ) ), "" ) +
			iffString( PlotVolumeText, NewLine + NumToSTr( volUp / ScaleVolumeBy, 0 ), "" ) + 
			iffString( PlotPriceText, NewLine + "+" + NumToSTr( ( lastHi - lastLo ) * PriceScale, 0 ), "" );
		Text_SetLocation_Dt( waveTxt, datetime[CurrentBar - lastHiBar], High[CurrentBar - lastHiBar] + Offset );
		Text_SetString( waveTxt, plotText );

		dir = -1; // trend direction is now down
		lastLo = lo[0];
		lastLoBar = CurrentBar; // now seeking new lows
		volDn = 0;
		barsBack = ( CurrentBar - lastHiBar - 1 );
		for x = barsBack downto 0
		begin
			volDn = volDn + vol[x];
			if PlotVolume then
			begin
				NoPlot[x]( 1 );
				Plot2[x]( VolDn, "Volume Down" );
			end;
		end;

		if PlotSwings then // start new trendline from new swing high to most recent low
		begin
			tl = TL_New_Dt( datetime[CurrentBar - lastHiBar], lastHi, datetime[CurrentBar - lastLoBar], lastLo );
			TL_SetExtLeft( tl, false );
			TL_SetExtRight( tl, false );
			TL_SetSize( tl, LineWidth );
			TL_SetStyle( tl, LineStyle );
			TL_SetColor( tl, DnColor );
		end;
		plotText = 
			iffString( PlotPriceText, NumToSTr( ( lastLo - lastHi ) * PriceScale, 0 ), "" ) + 
			iffString( PlotVolumeText, NewLine + NumToSTr( volDn / ScaleVolumeBy, 0 ), "" ) +
			iffString( PlotTimeText, NewLine + iffString( dailyTF, NumToStr( lastLoBar - lastHiBar, 0 ) + " bar(s)",
				DateTimeToHMS( ( ELDateToDateTime( Date[CurrentBar - lastLoBar] ) - ELDateToDateTime( Date[CurrentBar - lastHiBar] ) ) +
				ELTimeToDateTime_s( Time_s[CurrentBar - lastLoBar] ) - ELTimeToDateTime_s( Time_s[CurrentBar - lastHiBar] ) ) ), "" );
		waveTxt = Text_New_Dt( datetime[CurrentBar - lastLoBar], Low[CurrentBar - lastLoBar], plotText );
		Text_SetStyle( waveTxt, 2, 0 );
		Text_SetSize( waveTxt, Font_Size );
		Text_SetColor( waveTxt, TextColor );
	end;
end 
else
begin // dir < 0, trend is down, look for new swing low
	if RetraceMethod = 1 then swingLoCondition = hi[0] > lastLo + Retrace; // condition for swing low pnt
	if RetraceMethod = 2 then swingLoCondition = hi[0] > lastLo * (1 + Retrace * 0.01 ); // condition for swing low %
	if RetraceMethod = 3 then swingLoCondition = hi[0] > lastLo + ( Retrace * AvgTrueRange( Period ) ); // condition for swing low ATR
	if RetraceMethod = 4 then swingLoCondition = lo[0] > lastLo and hi[0] > hi[1]; // condition for swing low UTC

	if not swingLoCondition then
	begin
		if lo[0] < lastLo then // found a lower low
		begin
			lastLo = lo[0];
			lastLoBar = CurrentBar;
		end;
		// update cumulative volume of downswing
		volDn = 0;
		barsBack = ( CurrentBar - lastHiBar - 1 );
		for x = barsBack downto 0
		begin
			volDn = volDn + vol[x];
			if PlotVolume then
			begin
				NoPlot[x]( 1 );
				Plot2[x]( VolDn, "Volume Down" );
			end;
		end;
		// update current downswing line and text from lastHiBar
		if PlotSwings then
			TL_SetEnd_Dt( tl, datetime[0], lastLo );
		plotText =
			iffString( PlotPriceText, NumToSTr( ( lastLo - lastHi ) * PriceScale, 0 ) + NewLine, "" ) + 
			iffString( PlotVolumeText, NumToSTr( volDn / ScaleVolumeBy, 0 ) + NewLine, "" ) +
			iffString( PlotTimeText, iffString( dailyTF, NumToStr( CurrentBar - lastHiBar, 0 ) + " bar(s)",
				DateTimeToHMS( ( ELDateToDateTime( Date[0] ) - ELDateToDateTime( Date[CurrentBar - lastHiBar] ) ) +
				ELTimeToDateTime_s( Time_s[0] ) - ELTimeToDateTime_s( Time_s[CurrentBar - lastHiBar] ) ) ), "" );
		Text_SetLocation_Dt( waveTxt, datetime[0], Low[0] - Offset );
		Text_SetString( waveTxt, plotText );
	end
	else if swingLoCondition then // found a swing low
	begin
		// update cumulative volume of downswing
		volDn = 0;
		barsBack = ( CurrentBar - lastHiBar - 1 );
		for x = barsBack downto ( CurrentBar - lastLoBar )
		begin
			volDn = volDn + vol[x];
			if PlotVolume then
			begin
				NoPlot[x]( 1 );
				Plot2[x]( VolDn, "Volume Down" );
			end;
		end;
		// update current downswing line from lastHiBar
		if PlotSwings then
			TL_SetEnd_Dt( tl, datetime[CurrentBar - lastLoBar], lastLo );
		plotText =
			iffString( PlotPriceText, NumToSTr( ( lastLo - lastHi ) * PriceScale, 0 ) + NewLine, "" ) + 
			iffString( PlotVolumeText, NumToSTr( volDn / ScaleVolumeBy, 0 ) + NewLine, "" ) +
			iffString( PlotTimeText, iffString( dailyTF, NumToStr( lastLoBar - lastHiBar, 0 ) + " bar(s)",
				DateTimeToHMS( ( ELDateToDateTime( Date[CurrentBar - lastLoBar] ) - ELDateToDateTime( Date[CurrentBar - lastHiBar] ) ) +
				ELTimeToDateTime_s( Time_s[CurrentBar - lastLoBar] ) - ELTimeToDateTime_s( Time_s[CurrentBar - lastHiBar] ) ) ), "" );
		Text_SetLocation_Dt( waveTxt, datetime[CurrentBar - lastLoBar], Low[CurrentBar - lastLoBar] - Offset );
		Text_SetString( waveTxt, plotText );
		
		dir = 1; // trend direction is now up
		lastHi = hi[0];
		lastHiBar = CurrentBar; // now seeking new highs
		volUp = 0;
		barsBack = ( CurrentBar - lastLoBar - 1 );
		for x = barsBack downto 0
		begin
			volUp = volUp + vol[x];
			if PlotVolume then
			begin
				Plot1[x]( VolUp, "Volume Up" );
				NoPlot[x]( 2 );
			end;
		end;
		
		if PlotSwings then // start new trendline from new swing low to most recent high
		begin
			tl = TL_New_Dt( datetime[CurrentBar - lastLoBar], lastLo, datetime[CurrentBar - lastHiBar], lastHi );
			TL_SetExtLeft( tl, false );
			TL_SetExtRight( tl, false );
			TL_SetSize( tl, LineWidth );
			TL_SetStyle( tl, LineStyle );
			TL_SetColor( tl, UpColor );
		end;
		plotText =
			iffString( PlotTimeText, iffString( dailyTF, NumToStr( lastHiBar - lastLoBar, 0 ) + " bar(s)",
				DateTimeToHMS( ( ELDateToDateTime( Date[CurrentBar - lastHiBar] ) - ELDateToDateTime( Date[CurrentBar - lastLoBar] ) ) +
				ELTimeToDateTime_s( Time_s[CurrentBar - lastHiBar] ) - ELTimeToDateTime_s( Time_s[CurrentBar - lastLoBar] ) ) ), "" ) +
			iffString( PlotVolumeText, NewLine + NumToSTr( volUp / ScaleVolumeBy, 0 ), "" ) + 
			iffString( PlotPriceText, NewLine + "+" + NumToSTr( ( lastHi - lastLo ) * PriceScale, 0 ), "" );
		waveTxt = Text_New_Dt( datetime[CurrentBar - lastHiBar], High[CurrentBar - lastHiBar], plotText );
		Text_SetStyle( waveTxt, 2, 1 );
		Text_SetSize( waveTxt, Font_Size );
		Text_SetColor( waveTxt, TextColor );
	end;
end;

It was brought ot my attention that this indicator needs a function (that the indicator will reference), otherwise it won´t work. Again, I have no clue of how doing that. Here is the code for the function:

Code: Select all

inputs: XDateTime_s( numericsimple );

var: var0(0),var1(0),var2(0);

var0 = 24 * IntPortion( XDateTime_s ) + IntPortion( 24 * FracPortion( XDateTime_s ) ); // hours
var1 = IntPortion( 60 * FracPortion( 24 * XDateTime_s ) ); // minutes
var2 = IntPortion( 60 * FracPortion( 60 * FracPortion( 24 * XDateTime_s ) ) ); // seconds
                           
DateTimeToHms = NumToStr( var0, 0 ) + "h" + NumToStr( var1, 0 ) + "m" + NumToStr( var2, 0 ) + "s";

And someone gave me a tip on how to make it use delta instead of total volume by changing this bit of the code here:

// Initialize variables
dailyTF = BarType >= 2 and BarType < 5;
hi = iff( RetraceMethod = 4, Highest( HiPrice, Period ), HiPrice );
lo = iff( RetraceMethod = 4, Lowest( LoPrice, Period ), LoPrice );
vol = iff( dailyTF, Volume, Upticks-Downticks );

BUT, unless in TS code language Upticks-Downticks means Bid-Ask, then wouldn´t it be using tick volume ? I wanna real volume. So I wonder if the correct way isn´t:

// Initialize variables
dailyTF = BarType >= 2 and BarType < 5;
hi = iff( RetraceMethod = 4, Highest( HiPrice, Period ), HiPrice );
lo = iff( RetraceMethod = 4, Lowest( LoPrice, Period ), LoPrice );
vol = iff( dailyTF, Volume, Bid-Ask );



And I also realized that, correct if I am wrong, but shouldn´t this option be in the "Inputs" section of the code, not in "Initialize variables"? Anyways, as you can see I know ZERO programming, it would be great if someone with the hang of doing it in TS could grab this code and compile it for me, and then send me the indicator file ready to go.

Best regards
Alberto Gauer Borrego seller on MQL5 aka Rogue_Trader / LogicGate / Gauer

Re: TradeStation Indicators

75
Hi,

Can someone please help me and add Depth and Backstep calculation to this ZigZag indicator

Thanks in advance

[

Code: Select all

{ Search Tag: WA-ZigZag % }

using elsystem;
using elsystem.drawing;
using elsystem.drawingobjects;

inputs: 
	double HighPivotPrice( High ) [
		DisplayName = "HighPivotPrice", 
		ToolTip = "Enter an EasyLanguage expression to use in the calculation of high ZigZag pivots."],	
	
	double LowPivotPrice( Low ) [
		DisplayName = "LowPivotPrice", 
		ToolTip = "Enter an EasyLanguage expression to use in the calculation of low ZigZag pivots."],
	
	double RetracePct( 5 ) [
		DisplayName = "RetracePct", 
		ToolTip = "Retracement Percentage.  Enter The amount of retracement of the price specified in the price input that will cause a new zigzag line to be drawn."], 
	
	int LineColor( MyColors( "DodgerBlue" ) ) [
		DisplayName = "LineColor", 
		ToolTip = "Enter the color to be used for the zigzag lines."], 
	
	int LineWidth( 1 ) [
		DisplayName = "LineWidth", 
		ToolTip = "Enter the width, specified as a number, of the zigzag lines.  This value can have any integer value from 0 to 6."];

variables: 
	intrabarpersist bool UseBNPoint( false ),
	int DrawingObjectBarNumber( 0 ),
	TrendLine ZigZagTrendline( NULL ),
	DTPoint SwingDTPoint( NULL ),
	DTPoint LastSwingDTPoint( NULL ),
	BNPoint SwingBNPoint( NULL ),
	BNPoint LastSwingBNPoint( NULL ),
	double NewSwingPrice( 0 ), 
	double SwingPrice( Close ), { used as a convenient 2-element array }
	int TLDir( 0 ), { TLDir = -1 implies prev TL dn, +1 implies prev TL up }
	double RetraceFctrUp( 1 + RetracePct * .01 ), 
	double RetraceFctrDn( 1 - RetracePct * .01 ), 
	bool SaveSwing( false ), 
	bool AddTL( false ), 
	bool UpdateTL( false );

method TrendLine CreateNewTrendline()
variables:  TrendLine tempTL;
begin
	if UseBNPoint then
		tempTL = TrendLine.Create( LastSwingBNPoint, SwingBNPoint )
	else { use DTPoint }
		tempTL = TrendLine.Create( LastSwingDTPoint, SwingDTPoint );
	
	{ 
	Setting 'Persist' to false causes the trendline to be deleted on an 
	intrabar tick.  When set to false, a trendline that is created on the 
	closing tick of the bar	is saved/retained.
	}
	tempTL.Persist = false;
	tempTL.Lock = true; { prevent inadvertent moving }
	tempTL.Color = GetColorFromInteger( 255, LineColor );
	tempTL.ExtLeft = false;
	tempTL.ExtRight = false;
	tempTL.Weight = LineWidth;
	
	{ 
	this is how the trendline is "shown"; the trendline is added to the 
	DrawingObjects collection; if you want to remove the trendline, you can
	use the	Delete method of the DrawingObjects class; DrawingObjects collection
	is not available in RadarScreen (it is NULL), so we only add the trendlines 
	to the collection if not NULL
	}
	if DrawingObjects <> NULL then
		DrawingObjects.Add( tempTL );
	
	return tempTL;
end;

{ convert integer color to a color object and return the color object }
method Color GetColorFromInteger( int Alpha, int ColorInteger )
begin
	return Color.FromARGB( Alpha, GetRValue( ColorInteger ), 
	 GetGValue( ColorInteger ), GetBValue( ColorInteger ) );
end;

once
begin
	{
	When this study is applied to tick bars or advanced bars, we use BNPoint 
	positioning of text  labels.  This ensures that the text labels are positioned 
	on the correct bar even when multiple bars occur in the same second (as can 
	occur with very short-term tick bars).  When positioning time-based bars, on 
	the other hand, we’ll use DTPoint positioning.  This type of positioning can 
	account for missing bars in the data stream (periods of no trading activity, 
	as can occur with ‘thin’ issues).  Missing bars, of course, cannot occur when 
	using tick-based charts or advanced bars, since these bar-building mechanisms 
	do not move along the x-axis until enough trades have occurred to complete a 
	bar.  Thus, the approach illustrated here gives us the best of both worlds 
	– sub-second positioning and automatic accounting for missing bars.
	}
	UseBNPoint = BarType = 0 or ( BarType > 4 and BarType <> 14 );
	
	if UseBNPoint then
		SwingBNPoint = BNPoint.Create( CurrentBar + MaxBarsBack - 1, Close )
	else
		SwingDTPoint = DTPoint.Create( BarDateTime, Close );
end;

{ set the bar number for the drawing object }
if UseBNPoint then
	DrawingObjectBarNumber = CurrentBar + MaxBarsBack - 1;

NewSwingPrice = SwingHigh( 1, HighPivotPrice, 1, 2 );

if NewSwingPrice  <> -1 then 
begin
	if TLDir <= 0 and NewSwingPrice >= SwingPrice * RetraceFctrUp then 
	begin
		SaveSwing = true;
		AddTL = true;
		TLDir = 1;
	end 
	else if TLDir = 1 and NewSwingPrice >= SwingPrice then 
	begin
		SaveSwing = true;
		UpdateTL = true;
	end;
end 
else 
begin
	NewSwingPrice = SwingLow( 1, LowPivotPrice, 1, 2 );
	if NewSwingPrice <> -1 then 
	begin
		if TLDir >= 0 and NewSwingPrice <= SwingPrice * RetraceFctrDn then 
		begin
			SaveSwing = true;
			AddTL = true;
			TLDir = -1;
		end 
		else if TLDir = -1 and NewSwingPrice <= SwingPrice then 
		begin
			SaveSwing = true;
			UpdateTL = true;
		end;
	end;
end;

{ save new swing and reset SaveSwing }
if SaveSwing then 
begin
	if UseBNPoint then
	begin
		LastSwingBNPoint = SwingBNPoint;
		SwingBNPoint = BNPoint.Create( DrawingObjectBarNumber[1], NewSwingPrice );
	end
	else
	begin
		LastSwingDTPoint = SwingDTPoint;
		SwingDTPoint = DTPoint.Create( BarDateTime[1], NewSwingPrice );
	end;
	
	SwingPrice = NewSwingPrice;
	SaveSwing = false;
end;

if AddTL then { add new trendline }
begin
	ZigZagTrendline = CreateNewTrendline();
	AddTL = false;
end 
else if UpdateTL then { update trendline }
begin
	if ZigZagTrendline <> NULL then
	begin
		if UseBNPoint then
			ZigZagTrendline.SetEndPoint( SwingBNPoint )
		else
			ZigZagTrendline.SetEndPoint( SwingDTPoint );
	end;
	
	UpdateTL = false;
end;


{ ** Copyright © TradeStation Technologies, Inc.  All Rights Reserved ** 
  ** TradeStation reserves the right to modify or overwrite this analysis technique 
     with each release. ** }


Re: TradeStation Indicators

76
mladen wrote: Sat Mar 18, 2017 4:20 am Dsl - Detrended Synthetic Price indicator
Thank you for posting this. I be been looking for a TS version of this paid ninja indicator for awhile.

Volatility-super-trend

This dsl is the closest thing i have found to it. I tried to set up alerts and they are not working. Is there anyway for this to be customized into looking more like the ninja actor version?

Thank you for the indicator

Re: TradeStation Indicators

80
mladen wrote: Sat Mar 18, 2017 4:20 am Dsl - Detrended Synthetic Price indicator
Hello mladen, thanks for your brilliant work.

Are you able to publish a version of this as a function instead of an indicator? TradeStation does not have a way to call indicators from strategy code.

I would have done it myself but I do not want to break the forum rules by asking for code.


Who is online

Users browsing this forum: No registered users and 0 guests