https://forex-station.com/

MT4 Indicator requests and ideas

https://forex-station.com/viewtopic.php?t=8418142

Page 1696 of 2042

Re: MT4 Indicator requests and ideas

Posted: Thu Nov 10, 2022 11:51 pm
by Enes Kocoglu
mrtools wrote: Wed Aug 24, 2022 5:00 am This here is basically the same except it is using fractals Fractal channel osc. remember fractals repaint too, but the indicator refreshes itself.
dear Mrtools.

I have a kind request regarding your fractal channel indicator. Is it possible to make intermediate low and high candles a 3rd color instead of 2 color candles as in the picture?

up break occurred. the candle is green ok.. then green.. ok but is there a chance to be gray when a bearish candle comes?
3 color options.. fixes gray color

Re: MT4 Indicator requests and ideas

Posted: Fri Nov 11, 2022 5:05 am
by mrtools
Enes Kocoglu wrote: Thu Nov 10, 2022 11:51 pm dear Mrtools.

I have a kind request regarding your fractal channel indicator. Is it possible to make intermediate low and high candles a 3rd color instead of 2 color candles as in the picture?

up break occurred. the candle is green ok.. then green.. ok but is there a chance to be gray when a bearish candle comes?
3 color options.. fixes gray color
How to determine a bearish/bullish candle?

Re: MT4 Indicator requests and ideas

Posted: Fri Nov 11, 2022 9:50 am
by bypy
hello MrTools, I sent 2 photos of which one with a black background showing a correct cycle, the photo with a gray background shows a cycle of the attached code always with the same settings (170 340) both on the DAX with 15 minutes timeframe, but yes sees up in a different way. Can you make the code show cycle like in the photo with black background? Thank you

Re: MT4 Indicator requests and ideas

Posted: Fri Nov 11, 2022 12:04 pm
by mrtools
bypy wrote: Fri Nov 11, 2022 9:50 am hello MrTools, I sent 2 photos of which one with a black background showing a correct cycle, the photo with a gray background shows a cycle of the attached code always with the same settings (170 340) both on the DAX with 15 minutes timeframe, but yes sees up in a different way. Can you make the code show cycle like in the photo with black background? Thank you
Sorry not understanding, far as I know you adjust your settings to come close to matching.

Re: MT4 Indicator requests and ideas

Posted: Fri Nov 11, 2022 2:51 pm
by Chickenspicy
May someone kindly make a vwap cross ribbon indicator?
im not sure how it is calculated since the options are only in timeframes

Re: MT4 Indicator requests and ideas

Posted: Sat Nov 12, 2022 8:46 am
by ffsss
mrtools wrote: Thu Nov 10, 2022 5:53 pm There is a chande q stick from here Chande Q Stick would imagine it would be close to that without the smoothing.
I tried it, but the histogram always shows the bar colour (if bull green, bear orange) what i want is to show the gap (if open[0] > close[1] green and if open[0] < close[1] red )

Re: MT4 Indicator requests and ideas

Posted: Sat Nov 12, 2022 8:00 pm
by Jedidiah
honje19960321 wrote: Wed Nov 09, 2022 9:25 pm

Code: Select all

// © Dreadblitz
//@version=4
study(shorttitle="AAFLI", title="Angle Attack Follow Line Indicator ", overlay=false, max_bars_back=1000)

//INPUTS ————————————————————————————————————————————————————————————
FL            = input(title  = "🔰🔰🔰🔰 FOLLOW LINE CURRENT CHART RESOLUTION 🔰🔰🔰🔰", defval = true, type = input.bool)

BBperiod      = input(defval = 21,   title = "Period",    type = input.integer, minval = 1)
BBdeviations  = input(defval = 1.00, title = "Deviations",    type = input.float, minval = 0.1, step=0.05)
UseATRfilter  = input(defval = true, title = "ATR Filter",  type = input.bool)
ATRperiod     = input(defval = 5,    title = "ATR Period",    type = input.integer, minval = 1)

FLH           = input(title  = "🔰🔰🔰🔰🔰 FOLLOW LINE HIGHER TIME FRAME 🔰🔰🔰🔰🔰", defval = true, type = input.bool)

AIB           = input(defval = true, title = "Activate Indicator Background",  type = input.bool)
TYPE          = input(title  ="Type Of MA", defval="SMA", options=["RMA", "SMA", "EMA", "WMA", "VWMA", "SMMA", "KMA", "TMA", "HullMA", "DEMA", "TEMA", "CTI"])
RES           = input("240", type=input.resolution, title="Resolution")
LEN           = input(21, title = "Period", type=input.integer)
BBdeviations_ = input(defval = 1.00,title = "Deviations",    type = input.float, minval = 0.1, step=0.05)
ATRperiod_    = input(defval = 5,title = "ATR Period",    type = input.integer, minval = 1)
SOUR          = input(type=input.source,title = "Source", defval=close)

MD            = input(title  = "🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰 MODE 🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰", defval = true, type = input.bool)

MODE          = input(title  ="Type Of Mode", defval="NO FILTER HIGHER TIME FRAME", options=["NO FILTER HIGHER TIME FRAME", "FILTER HIGHER TIME FRAME"])

AC            = input(title  = "🔰🔰🔰🔰🔰🔰🔰🔰 ANGLE CONFIGURATION 🔰🔰🔰🔰🔰🔰🔰", defval = true, type = input.bool)

i_lookback    = input(8,     "Angle Period", input.integer, minval = 1)
i_atrPeriod   = input(10,    "ATR Period",   input.integer, minval = 1)

BSA           = input(title  = "🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰 BUY/SELL 🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰", defval = true, type = input.bool)

Buy_0         = input(defval = true, title = "Buy Change Follow Line",  type = input.bool)
Sell_0        = input(defval = true, title = "Sell Change Follow Line",  type = input.bool)

OTA           = input(title  = "🔰🔰🔰🔰🔰🔰🔰🔰🔰 OPTIONS TO ADD 🔰🔰🔰🔰🔰🔰🔰🔰", defval = true, type = input.bool)

Add_Buy_0     = input(defval = true, title = "Option 1 to Add Buy",  type = input.bool)
Add_Sell_0    = input(defval = true, title = "Option 1 to Add Sell",  type = input.bool)
Add_Buy_1     = input(defval = false, title = "Option 2 to Add Buy",  type = input.bool)
Add_Sell_1    = input(defval = false, title = "Option 2 to Add Sell",  type = input.bool)
Add_Buy_2     = input(defval = false, title = "Option 3 to Add Buy",  type = input.bool)
Add_Sell_2    = input(defval = false, title = "Option 3 to Add Sell",  type = input.bool)

OTR           = input(title  = "🔰🔰🔰🔰🔰🔰🔰🔰 OPTIONS TO REDUCE 🔰🔰🔰🔰🔰🔰🔰🔰", defval = true, type = input.bool)

Max_level_1   = input(defval = 40,   title = "Max Angle Level 1",    type = input.integer, minval = 1)
Max_level_2   = input(defval = 65,   title = "Max Angle Level 2",    type = input.integer, minval = 1)
Min_level_1   = input(defval = -40,  title = "Min Angle Level 1",    type = input.integer, minval = -100)
Min_level_2   = input(defval = -65,  title = "Min Angle Level 2",    type = input.integer, minval = -100)
Red_Buy_0     = input(defval = true, title = "Option 1 to Reduce Buy Max Angle Level 1",  type = input.bool)
Red_Buy_1     = input(defval = true, title = "Option 2 to Reduce Buy Max Angle Level 2",  type = input.bool)
Red_Buy_2     = input(defval = false,title = "Option 3 to Reduce Buy 2 Bars Above Max Angle Level 2",  type = input.bool)
Red_Buy_3     = input(defval = true, title = "Option 4 to Reduce Buy 3 Bars Above Max Angle Level 2",  type = input.bool)
Red_Buy_4     = input(defval = false,title = "Option 5 to Reduce Buy 4 Bars Above Max Angle Level 2",  type = input.bool)
Red_Sell_0    = input(defval = true, title = "Option 1 to Reduce Sell Min Angle Level 1",  type = input.bool)
Red_Sell_1    = input(defval = true, title = "Option 2 to Reduce Sell Min Angle Level 1",  type = input.bool)
Red_Sell_2    = input(defval = false,title = "Option 3 to Reduce Sell 2 bars Below Min Angle Level 2",  type = input.bool)
Red_Sell_3    = input(defval = true, title = "Option 4 to Reduce Sell 3 bars Below Min Angle Level 2",  type = input.bool)
Red_Sell_4    = input(defval = false,title = "Option 5 to Reduce Sell 4 bars Below Min Angle Level 2",  type = input.bool)


OTH           = input(title  = "🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰 OTHERS 🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰", defval = true, type = input.bool)

i_barColor    = input(true, "Bar Color?")
h_lables      = input(false, "Hide Labels")


// FOLLOW LINE —————————————————————————————————————————————————————

BBUpper=sma (close,BBperiod)+stdev(close, BBperiod)*BBdeviations
BBLower=sma (close,BBperiod)-stdev(close, BBperiod)*BBdeviations
TrendLine = 0.0
iTrend = 0.0
BBSignal = close>BBUpper? 1 : close<BBLower? -1 : 0
if BBSignal == 1 and UseATRfilter == 1
    TrendLine:=low-atr(ATRperiod)
    if TrendLine<TrendLine[1] 
        TrendLine:=TrendLine[1]
if BBSignal == -1 and UseATRfilter == 1
    TrendLine:=high+atr(ATRperiod)
    if TrendLine>TrendLine[1]
        TrendLine:=TrendLine[1]
if BBSignal == 0 and UseATRfilter == 1
    TrendLine:=TrendLine[1]
if BBSignal == 1 and UseATRfilter == 0
    TrendLine:=low
    if TrendLine<TrendLine[1] 
        TrendLine:=TrendLine[1]
if BBSignal == -1 and UseATRfilter == 0
    TrendLine:=high
    if TrendLine>TrendLine[1]
        TrendLine:=TrendLine[1]
if BBSignal == 0 and UseATRfilter == 0
    TrendLine:=TrendLine[1]
iTrend:=iTrend[1]
if TrendLine>TrendLine[1] 
    iTrend:=1
if TrendLine<TrendLine[1] 
    iTrend:=-1

// FOLLOW LINE HIGHER TIME FRAME ——————————————————————————————

cd = 0.0
cti(sm, src, cd) =>
    di = (sm - 1.0) / 2.0 + 1.0
    c1 = 2 / (di + 1.0)
    c2 = 1 - c1
    c3 = 3.0 * (cd * cd + cd * cd * cd)
    c4 = -3.0 * (2.0 * cd * cd + cd + cd * cd * cd)
    c5 = 3.0 * cd + 1.0 + cd * cd * cd + 3.0 * cd * cd
    i1 = 0.0
    i2 = 0.0
    i3 = 0.0
    i4 = 0.0
    i5 = 0.0
    i6 = 0.0
    i1 := c1*src + c2*nz(i1[1])
    i2 := c1*i1 + c2*nz(i2[1])
    i3 := c1*i2 + c2*nz(i3[1])
    i4 := c1*i3 + c2*nz(i4[1])
    i5 := c1*i4 + c2*nz(i5[1])
    i6 := c1*i5 + c2*nz(i6[1])
        
    bfr = -cd*cd*cd*i6 + c3*(i5) + c4*(i4) + c5*(i3)
    bfr

smma(src, len) =>
    smma = 0.0
    smma := na(smma[1]) ? sma(src, len) : (smma[1] * (len - 1) + src) / len
    smma

ma(smoothing, src, length) => 
    if smoothing == "RMA"
        rma(src, length)
    else
        if smoothing == "SMA"
            sma(src, length)
        else 
            if smoothing == "EMA"
                ema(src, length)
            else 
                if smoothing == "WMA"
                    wma(src, length)
				else
					if smoothing == "VWMA"
						vwma(src, length)
					else
						if smoothing == "SMMA"
						    smma(src, length)
						else
							if smoothing == "HullMA"
								wma(2 * wma(src, length / 2) - wma(src, length), round(sqrt(length)))
							else
								if smoothing == "LSMA"
									src
								else
								    if smoothing == "KMA"
								        xPrice = src
                                        xvnoise = abs(xPrice - xPrice[1])
                                        nfastend = 0.666
                                        nslowend = 0.0645
                                        nsignal = abs(xPrice - xPrice[length])
                                        nnoise = sum(xvnoise, length)
                                        nefratio = iff(nnoise != 0, nsignal / nnoise, 0)
                                        nsmooth = pow(nefratio * (nfastend - nslowend) + nslowend, 2) 
                                        nAMA = 0.0
                                        nAMA := nz(nAMA[1]) + nsmooth * (xPrice - nz(nAMA[1]))
                                        nAMA
								    else
								        if smoothing == "TMA"
									        sma(sma(close, length), length)
						                else
							                if smoothing == "DEMA"
							                    emaValue = ema(src, length)
                                                2 * emaValue - ema(emaValue, length)
							                else
							                    if smoothing == "TEMA"
							                        ema1 = ema(src, length)
                                                    ema2 = ema(ema1, length)
                                                    ema3 = ema(ema2, length)
                                                    (3 * ema1) - (3 * ema2) + ema3
							                    else
						                            if smoothing == "CTI"
                                                        cti(length, src, cd)
	    								            else
		    							                src

MA = ma(TYPE, SOUR, LEN)
MA_MTF = security(syminfo.tickerid, RES, MA)
close_ = security(syminfo.tickerid, RES, close)
low_ = security(syminfo.tickerid, RES, low)
high_ = security(syminfo.tickerid, RES, high)
atr_ = security(syminfo.tickerid, RES, atr(ATRperiod_))

BBUpper_=MA_MTF+stdev(close_, LEN)*BBdeviations_
BBLower_=MA_MTF-stdev(close_, LEN)*BBdeviations_

TrendLine_MTF = 0.0
iTrend_ = 0.0

BBSignal_ = close_>BBUpper_? 1 : close_<BBLower_? -1 : 0
 
if BBSignal_ == 1 
    TrendLine_MTF:=low_-atr_
    if TrendLine_MTF<TrendLine_MTF[1] 
        TrendLine_MTF:=TrendLine_MTF[1]
if BBSignal_ == -1 
    TrendLine_MTF:=high_+atr_
    if TrendLine_MTF>TrendLine_MTF[1]
        TrendLine_MTF:=TrendLine_MTF[1]
if BBSignal_ == 0 
    TrendLine_MTF:=TrendLine_MTF[1]

iTrend_:=iTrend_[1]
if TrendLine_MTF>TrendLine_MTF[1] 
    iTrend_:=1
if TrendLine_MTF<TrendLine_MTF[1] 
    iTrend_:=-1

// ANGLE FL———————————————————————————————————————————————————————————— 

f_angle(_src, _lookback, _atrPeriod) =>
    rad2degree = 180 / 3.14159265359
    ang = rad2degree * atan((_src[0] - _src[_lookback]) / atr(_atrPeriod))
    ang
    
_angle_fl = f_angle(TrendLine, i_lookback, i_atrPeriod)


// BUY/SELL AND NO FILTER HIGHER TIME FRAME  ————————————————————————————————————————————————————————————

buy_0 = iTrend[1] < 0 and iTrend > 0 and Buy_0 and MODE == "NO FILTER HIGHER TIME FRAME" ? 1 :0 
sell_0 = iTrend[1] > 0 and iTrend < 0 and Sell_0 and MODE == "NO FILTER HIGHER TIME FRAME"? 1 :0 

// BUY/SELL AND FILTER HIGHER TIME FRAME  ————————————————————————————————————————————————————————————

buy_0_A = iTrend[1] < 0 and iTrend > 0 and Buy_0 and MODE == "FILTER HIGHER TIME FRAME" and iTrend_==1 ? 1 :0 
sell_0_A = iTrend[1] > 0 and iTrend < 0 and Sell_0 and MODE == "FILTER HIGHER TIME FRAME" and iTrend_==-1? 1 :0 


//ADD AND NO FILTER HIGHER TIME FRAME ————————————————————————————————————————————————————————————

add_buy_1 = _angle_fl [2] > 0 and _angle_fl [1] == 0 and _angle_fl == 0 and iTrend > 0 and Add_Buy_0 and MODE == "NO FILTER HIGHER TIME FRAME" ? 1 :0 

add_sell_1 = _angle_fl [2] < 0 and _angle_fl [1] == 0 and _angle_fl == 0 and iTrend < 0 and Add_Sell_0 and MODE == "NO FILTER HIGHER TIME FRAME" ? 1 :0 

add_buy_2 = _angle_fl [5] > 0 and _angle_fl [4] == 0 and _angle_fl[3] == 0 and _angle_fl[2] == 0 and _angle_fl[1] == 0 and _angle_fl == 0 and iTrend > 0 and Add_Buy_1 and MODE == "NO FILTER HIGHER TIME FRAME" ? 1 :0 

add_sell_2 = _angle_fl [5] < 0 and _angle_fl [4] == 0 and _angle_fl[3] == 0 and _angle_fl[2] == 0 and _angle_fl[1] == 0 and _angle_fl == 0 and iTrend < 0 and Add_Sell_1 and MODE == "NO FILTER HIGHER TIME FRAME" ? 1 :0 

add_buy_3 = _angle_fl [8] > 0 and _angle_fl [7] == 0 and _angle_fl[6] == 0 and _angle_fl[5] == 0 and _angle_fl[4] == 0 and _angle_fl[3] == 0 and _angle_fl[2] == 0 and _angle_fl[1] == 0 and _angle_fl == 0 and iTrend > 0 and Add_Buy_2 and MODE == "NO FILTER HIGHER TIME FRAME" ? 1 :0 

add_sell_3 = _angle_fl [8] < 0 and _angle_fl [7] == 0 and _angle_fl[6] == 0 and _angle_fl[5] == 0 and _angle_fl[4] == 0 and _angle_fl[3] == 0 and _angle_fl[2] == 0 and _angle_fl[1] == 0 and _angle_fl == 0 and iTrend < 0 and Add_Sell_2 and MODE == "NO FILTER HIGHER TIME FRAME" ? 1 :0 

//ADD AND FILTER HIGHER TIME FRAME ————————————————————————————————————————————————————————————

add_buy_1_A = _angle_fl [2] > 0 and _angle_fl [1] == 0 and _angle_fl == 0 and iTrend > 0 and Add_Buy_0 and MODE == "FILTER HIGHER TIME FRAME" and iTrend_==1? 1 :0 

add_sell_1_A = _angle_fl [2] < 0 and _angle_fl [1] == 0 and _angle_fl == 0 and iTrend < 0 and Add_Sell_0 and MODE == "FILTER HIGHER TIME FRAME"and iTrend_==-1? 1 :0 

add_buy_2_A = _angle_fl [5] > 0 and _angle_fl [4] == 0 and _angle_fl[3] == 0 and _angle_fl[2] == 0 and _angle_fl[1] == 0 and _angle_fl == 0 and MODE == "FILTER HIGHER TIME FRAME" and iTrend_==1 and Add_Buy_1? 1 :0 

add_sell_2_A = _angle_fl [5] < 0 and _angle_fl [4] == 0 and _angle_fl[3] == 0 and _angle_fl[2] == 0 and _angle_fl[1] == 0 and _angle_fl == 0 and MODE == "FILTER HIGHER TIME FRAME" and iTrend_==-1 and Add_Sell_1 ? 1 :0 

add_buy_3_A = _angle_fl [8] > 0 and _angle_fl [7] == 0 and _angle_fl[6] == 0 and _angle_fl[5] == 0 and _angle_fl[4] == 0 and _angle_fl[3] == 0 and _angle_fl[2] == 0 and _angle_fl[1] == 0 and _angle_fl == 0 and MODE == "FILTER HIGHER TIME FRAME" and iTrend_==1 and Add_Buy_2? 1 :0 

add_sell_3_A = _angle_fl [8] < 0 and _angle_fl [7] == 0 and _angle_fl[6] == 0 and _angle_fl[5] == 0 and _angle_fl[4] == 0 and _angle_fl[3] == 0 and _angle_fl[2] == 0 and _angle_fl[1] == 0 and _angle_fl == 0 and MODE == "FILTER HIGHER TIME FRAME" and iTrend_==-1 and Add_Sell_2 ? 1 :0 


//REDUCE AND NO FILTER HIGHER TIME FRAME ————————————————————————————————————————————————————————————

Redu_buy_1 = _angle_fl [1] < Max_level_1 and _angle_fl > Max_level_1 and Red_Buy_0 and MODE == "NO FILTER HIGHER TIME FRAME"? 1 :0 
Redu_buy_2 = _angle_fl [1] < Max_level_2 and _angle_fl > Max_level_2 and Red_Buy_1 and MODE == "NO FILTER HIGHER TIME FRAME"? 1 :0 
Redu_buy_3 = _angle_fl [2] < Max_level_2 and _angle_fl [1] > Max_level_2 and _angle_fl > Max_level_2 and Red_Buy_2 and MODE == "NO FILTER HIGHER TIME FRAME"? 1 :0 
Redu_buy_4 = _angle_fl [3] < Max_level_2 and _angle_fl [2] > Max_level_2 and _angle_fl [1] > Max_level_2 and _angle_fl > Max_level_2 and Red_Buy_3 and MODE == "NO FILTER HIGHER TIME FRAME"? 1 :0 
Redu_buy_5 = _angle_fl [4] < Max_level_2 and _angle_fl [3] > Max_level_2 and _angle_fl [2] > Max_level_2 and _angle_fl [1] > Max_level_2 and _angle_fl > Max_level_2 and Red_Buy_4 and MODE == "NO FILTER HIGHER TIME FRAME"? 1 :0 

Redu_sell_1 = _angle_fl [1] > Min_level_1 and _angle_fl < Min_level_1 and Red_Sell_0 and MODE == "NO FILTER HIGHER TIME FRAME"? 1 :0 
Redu_sell_2 = _angle_fl [1] > Min_level_2 and _angle_fl < Min_level_2 and Red_Sell_1 and MODE == "NO FILTER HIGHER TIME FRAME"? 1 :0 
Redu_sell_3 = _angle_fl [2] > Min_level_2 and _angle_fl [1] < Min_level_2 and _angle_fl < Min_level_2 and Red_Sell_2 and MODE == "NO FILTER HIGHER TIME FRAME"? 1 :0 
Redu_sell_4 = _angle_fl [3] > Min_level_2 and _angle_fl [2] < Min_level_2 and _angle_fl [1] < Min_level_2 and _angle_fl < Min_level_2 and Red_Sell_3 and MODE == "NO FILTER HIGHER TIME FRAME"? 1 :0 
Redu_sell_5 = _angle_fl [4] > Min_level_2 and _angle_fl [3] < Min_level_2 and _angle_fl [2] < Min_level_2 and _angle_fl [1] < Min_level_2 and _angle_fl < Min_level_2 and Red_Sell_4 and MODE == "NO FILTER HIGHER TIME FRAME"? 1 :0 

//REDUCE AND FILTER HIGHER TIME FRAME ————————————————————————————————————————————————————————————

Redu_buy_1_A = _angle_fl [1] < Max_level_1 and _angle_fl > Max_level_1 and Red_Buy_0 and MODE == "FILTER HIGHER TIME FRAME" and iTrend_==1? 1 :0 
Redu_buy_2_A = _angle_fl [1] < Max_level_2 and _angle_fl > Max_level_2 and Red_Buy_1 and MODE == "FILTER HIGHER TIME FRAME" and iTrend_==1? 1 :0 
Redu_buy_3_A = _angle_fl [2] < Max_level_2 and _angle_fl [1] > Max_level_2 and _angle_fl > Max_level_2 and Red_Buy_2 and MODE == "FILTER HIGHER TIME FRAME" and iTrend_==1? 1 :0 
Redu_buy_4_A = _angle_fl [3] < Max_level_2 and _angle_fl [2] > Max_level_2 and _angle_fl [1] > Max_level_2 and _angle_fl > Max_level_2 and Red_Buy_3 and MODE == "FILTER HIGHER TIME FRAME" and iTrend_==1? 1 :0 
Redu_buy_5_A = _angle_fl [4] < Max_level_2 and _angle_fl [3] > Max_level_2 and _angle_fl [2] > Max_level_2 and _angle_fl [1] > Max_level_2 and _angle_fl > Max_level_2 and Red_Buy_4 and MODE == "FILTER HIGHER TIME FRAME" and iTrend_==1? 1 :0 

Redu_sell_1_A = _angle_fl [1] > Min_level_1 and _angle_fl < Min_level_1 and Red_Sell_0 and MODE == "FILTER HIGHER TIME FRAME" and iTrend_==-1? 1 :0 
Redu_sell_2_A = _angle_fl [1] > Min_level_2 and _angle_fl < Min_level_2 and Red_Sell_1 and MODE == "FILTER HIGHER TIME FRAME" and iTrend_==-1? 1 :0 
Redu_sell_3_A = _angle_fl [2] > Min_level_2 and _angle_fl [1] < Min_level_2 and _angle_fl < Min_level_2 and Red_Sell_2 and MODE == "FILTER HIGHER TIME FRAME" and iTrend_==-1? 1 :0 
Redu_sell_4_A = _angle_fl [3] > Min_level_2 and _angle_fl [2] < Min_level_2 and _angle_fl [1] < Min_level_2 and _angle_fl < Min_level_2 and Red_Sell_3 and MODE == "FILTER HIGHER TIME FRAME" and iTrend_==-1? 1 :0 
Redu_sell_5_A = _angle_fl [4] > Min_level_2 and _angle_fl [3] < Min_level_2 and _angle_fl [2] < Min_level_2 and _angle_fl [1] < Min_level_2 and _angle_fl < Min_level_2 and Red_Sell_4 and MODE == "FILTER HIGHER TIME FRAME" and iTrend_==-1? 1 :0 

// PLOT ————————————————————————————————————————————————————————————

_color_fl = iTrend > 0?color.blue:color.red

plot(_angle_fl,"Angle Follow Line", _color_fl, 3, plot.style_line)
plot(_angle_fl,"Angle Follow Line Histogram", _color_fl, 3, plot.style_histogram)

hline(Max_level_1, title='Max Angle Level 1', color=color.blue, linestyle=hline.style_dotted, linewidth=1)
hline(Max_level_2, title='Max Angle Level 2', color=color.blue, linestyle=hline.style_dotted, linewidth=1)
hline(Min_level_1, title='Min Angle Level 1', color=color.red, linestyle=hline.style_dotted, linewidth=1)
hline(Min_level_2, title='Min Angle Level 2', color=color.red, linestyle=hline.style_dotted, linewidth=1)


plotshape(h_lables == false and (sell_0 or sell_0_A) ? 5 : na, title="Sell", text="Sell", location=location.absolute, style=shape.labeldown, size=size.tiny, color=color.red, textcolor=color.white,transp=0)
plotshape(h_lables == false and (buy_0 or buy_0_A)? -5 : na, title="Buy", text="Buy", location=location.absolute, style=shape.labelup, size=size.tiny, color=color.blue, textcolor=color.white,transp=0)

plotshape(h_lables == false and (add_sell_1 or add_sell_1_A or add_sell_2 or add_sell_3 or add_sell_2_A or add_sell_3_A) ? _angle_fl +5 : na, title="Add Sell 1", text="Add", location=location.absolute, style=shape.labeldown, size=size.tiny, color=color.red, textcolor=color.white,transp=0)
plotshape(h_lables == false and (add_buy_1 or add_buy_1_A or add_buy_2 or add_buy_3 or add_buy_2_A or add_buy_3_A) ? _angle_fl -5 : na, title="Add Buy 1", text="Add", location=location.absolute, style=shape.labelup, size=size.tiny, color=color.blue, textcolor=color.white,transp=0)

plotshape(h_lables == false and (Redu_buy_1 or Redu_buy_1_A)? _angle_fl +5 : na, title="Reduce Buy 1", text="Red", location=location.absolute, style=shape.labeldown, size=size.tiny, color=color.blue, textcolor=color.white,transp=0)
plotshape(h_lables == false and (Redu_buy_2 or Redu_buy_2_A)? _angle_fl +5 : na, title="Reduce Buy 2", text="Red", location=location.absolute, style=shape.labeldown, size=size.tiny, color=color.blue, textcolor=color.white,transp=0)
plotshape(h_lables == false and (Redu_buy_3 or Redu_buy_3_A)? _angle_fl +5 : na, title="Reduce Buy 3", text="Red", location=location.absolute, style=shape.labeldown, size=size.tiny, color=color.blue, textcolor=color.white,transp=0)
plotshape(h_lables == false and (Redu_buy_4 or Redu_buy_4_A)? _angle_fl +5 : na, title="Reduce Buy 4", text="Red", location=location.absolute, style=shape.labeldown, size=size.tiny, color=color.blue, textcolor=color.white,transp=0)
plotshape(h_lables == false and (Redu_buy_5 or Redu_buy_5_A)? _angle_fl +5 : na, title="Reduce Buy 5", text="Red", location=location.absolute, style=shape.labeldown, size=size.tiny, color=color.blue, textcolor=color.white,transp=0)

plotshape(h_lables == false and (Redu_sell_1 or Redu_sell_1_A) ? _angle_fl -5 : na, title="Reduce Sell 1", text="Red", location=location.absolute, style=shape.labelup, size=size.tiny, color=color.red, textcolor=color.white,transp=0)
plotshape(h_lables == false and (Redu_sell_2 or Redu_sell_2_A)? _angle_fl -5 : na, title="Reduce Sell 2", text="Red", location=location.absolute, style=shape.labelup, size=size.tiny, color=color.red, textcolor=color.white,transp=0)
plotshape(h_lables == false and (Redu_sell_3 or Redu_sell_3_A)? _angle_fl -5 : na, title="Reduce Sell 3", text="Red", location=location.absolute, style=shape.labelup, size=size.tiny, color=color.red, textcolor=color.white,transp=0)
plotshape(h_lables == false and (Redu_sell_4 or Redu_sell_4_A)? _angle_fl -5 : na, title="Reduce Sell 4", text="Red", location=location.absolute, style=shape.labelup, size=size.tiny, color=color.red, textcolor=color.white,transp=0)
plotshape(h_lables == false and (Redu_sell_5 or Redu_sell_5_A)? _angle_fl -5 : na, title="Reduce Sell 5", text="Red", location=location.absolute, style=shape.labelup, size=size.tiny, color=color.red, textcolor=color.white,transp=0)

bgcolor(iTrend_ > 0 and AIB? color.blue : iTrend_ < 0 and AIB? color.red:na, transp=70)

barcolor(iTrend > 0?color.blue:color.red)

// ALERTS————————————————————————————————————————————————————————————

alertcondition(sell_0 or sell_0_A,title="Sell",message="Sell")
alertcondition(buy_0 or buy_0_A,title="Buy",message="Buy")

alertcondition(add_sell_1 or add_sell_1_A or add_sell_2 or add_sell_3 or add_sell_2_A or add_sell_3_A,title="Add Sell",message="Add Sell")
alertcondition(add_buy_1 or add_buy_1_A or add_buy_2 or add_buy_3 or add_buy_2_A or add_buy_3_A,title="Add Buy",message="Add Buy")

alertcondition(Redu_buy_1 or Redu_buy_1_A or Redu_buy_2 or Redu_buy_2_A or Redu_buy_3 or Redu_buy_3_A or Redu_buy_4 or Redu_buy_4_A or Redu_buy_5 or Redu_buy_5_A,title="Reduce Buy",message="Reduce Buy")
alertcondition(Redu_sell_1 or Redu_sell_1_A or Redu_sell_2 or Redu_sell_2_A or Redu_sell_3 or Redu_sell_3_A or Redu_sell_4 or Redu_sell_4_A or Redu_sell_5 or Redu_sell_5_A,title="Reduce Sell",message="Reduce Sell")

alertcondition(sell_0 or sell_0_A or buy_0 or buy_0_A or add_sell_1 or add_sell_1_A or add_sell_2 or add_sell_3 or add_sell_2_A or add_sell_3_A or add_buy_1 or add_buy_1_A or add_buy_2 or add_buy_3 or add_buy_2_A or add_buy_3_A or Redu_buy_1 or Redu_buy_1_A or Redu_buy_2 or Redu_buy_2_A or Redu_buy_3 or Redu_buy_3_A or Redu_buy_4 or Redu_buy_4_A or Redu_buy_5 or Redu_buy_5_A or Redu_sell_1 or Redu_sell_1_A or Redu_sell_2 or Redu_sell_2_A or Redu_sell_3 or Redu_sell_3_A or Redu_sell_4 or Redu_sell_4_A or Redu_sell_5 or Redu_sell_5_A ,title="Buy/Sell/Add/Reduce",message="Buy/Sell/Add/Reduce")

QQ截图20221108221646.png


What a great find, thanks for sharing.

Ask our favorite Mr tools to help us implement the MT4 version of it


https://tw.tradingview.com/script/t3aX6 ... Indicator/

Wonder if dear Mr Tools see this thread?
Can this idea be realized?

gratitude

Re: MT4 Indicator requests and ideas

Posted: Sat Nov 12, 2022 9:50 pm
by pin12
Is there any indicator similar to this in forex-station? Top Bottom Finder
It looks like a dual color version of the SNAKE indicator

Re: MT4 Indicator requests and ideas

Posted: Sat Nov 12, 2022 10:40 pm
by Deez
pin12 wrote: Sat Nov 12, 2022 9:50 pm Is there any indicator similar to this in forex-station? Top Bottom Finder
It looks like a dual color version of the SNAKE indicator
Top Bottom finder - think you will need a dating site for that

:Rofl: :D

Anyway try this..

Re: MT4 Indicator requests and ideas

Posted: Sun Nov 13, 2022 1:12 am
by sal
mr.tools
can you please make arrow for this tma indicator. there is TMACG indicator has same arrow setting can adopt.
This indicator has atr OPTIONS where tma cg dont have
if tma CG and this indicator is same, better to add ATR period in setting , that also fine for me.
All times are UTC+10:00
Page 1696 of 2042

Powered by phpBB® Forum Software © phpBB Limited