NO LINKS, SOURCE CODE REQUESTS OR MODIFICATION OF DECOMPILED INDICATORS. To avoid post deletion please follow the rules.

Re: Timmy's Expert advisor service

#101
Dune2000 wrote:
Sat May 12, 2018 1:03 am
TimmyHanke wrote:
Sat May 12, 2018 1:00 am


I was constantly refreshing the page to see if you would write exactly that , will change everything though, will do my best
Sorry for keeping you waiting Sir, but the market is slow that is why testing is slow!

Thanking you for your efforts!
I love that you are fast to reply to tell if it works or not , most are not like you.
And even if it works most often never write that , and that is something i want to know , because a problem can be solved in 1 000 000 different ways , some are faster some take time.

In this case why i refreshed the page just waiting for you to write back was because when i send the latest i didnt know why the terminate triggered so fast , and the way i solved it were just to delay it until the pending order wasnt there and the sequence had a chance to do the work , but i used something like this :

If group 1 hit stoploss enter opposite trade if it didnt terminate , and if not can mean many things in this case , not that it hit take profit instead , can mean that it didnt close at all aswell , so any conditions exept stoploss it looked at and if that didnt happend it terminated .

Now it looks at did it hit stoploss , open next section trade , or if it hit take profit terminate . So now it only looking for two things :)
Pending martingale BUY.mq4
(545.48 KiB) Downloaded 460 times
Pending martingale SELL.mq4
(545.5 KiB) Downloaded 331 times


Re: Timmy's Expert advisor service

#102
TimmyHanke wrote:
Sat May 12, 2018 1:17 am
Dune2000 wrote:
Sat May 12, 2018 1:03 am


Sorry for keeping you waiting Sir, but the market is slow that is why testing is slow!

Thanking you for your efforts!
I love that you are fast to reply to tell if it works or not , most are not like you.
And even if it works most often never write that , and that is something i want to know , because a problem can be solved in 1 000 000 different ways , some are faster some take time.

In this case why i refreshed the page just waiting for you to write back was because when i send the latest i didnt know why the terminate triggered so fast , and the way i solved it were just to delay it until the pending order wasnt there and the sequence had a chance to do the work , but i used something like this :

If group 1 hit stoploss enter opposite trade if it didnt terminate , and if not can mean many things in this case , not that it hit take profit instead , can mean that it didnt close at all aswell , so any conditions exept stoploss it looked at and if that didnt happend it terminated .

Now it looks at did it hit stoploss , open next section trade , or if it hit take profit terminate . So now it only looking for two things :)
Dear Sir, First, Thank You for the compliment!

Secondly, Sorry for the delay as I went out with family For Dinner and just now came back and Downloaded the EA's.

Will test them and let you know!

Thanking you for your efforts!

Re: Timmy's Expert advisor service

#103
Dear Sir,

The EA's are working just the way I want them to!

This is all thanks to your Efforts and your generosity!

I had Searched All Over for Similar EA's but to no avail!

But now, thanks to you, The EA is a reality!

I thank you from bottom of my heart!

Thanking You Once Again!
And Wishing you Best Of Luck and Fortune In your Future Endeavors!

Re: Timmy's Expert advisor service

#104
Dune2000 wrote:
Sat May 12, 2018 2:44 am
Dear Sir,

The EA's are working just the way I want them to!

This is all thanks to your Efforts and your generosity!

I had Searched All Over for Similar EA's but to no avail!

But now, thanks to you, The EA is a reality!

I thank you from bottom of my heart!

Thanking You Once Again!
And Wishing you Best Of Luck and Fortune In your Future Endeavors!
That made my day right there , hope everything works well with your new toys , and hope they preform as you thought.

/ Timmy Hanke.

Re: Timmy's Expert advisor service

#105
MrTools, Mtiwana and/or Timmy,

Is there an Expert Advisor in this Thread ( I may have missed it during my search and I apologise up front if I did) that will work on the crossing of 2 moving averages ( I know it sounds so "old school"), but with this difference that I can adjust the shift of one of the MAs or both for that matter - independently.

Settings parameters as follows: Period; Shift; Method; Apply to.

Ideally I wish to add a CCI to it but for now it will suffice.

Thank you for replying at your convenience.


Re: Timmy's Expert advisor service

#107
Hercs wrote:
Thu May 17, 2018 12:32 am
MrTools, Mtiwana and/or Timmy,

Is there an Expert Advisor in this Thread ( I may have missed it during my search and I apologise up front if I did) that will work on the crossing of 2 moving averages ( I know it sounds so "old school"), but with this difference that I can adjust the shift of one of the MAs or both for that matter - independently.

Settings parameters as follows: Period; Shift; Method; Apply to.

Ideally I wish to add a CCI to it but for now it will suffice.

Thank you for replying at your convenience.
This is Mladen's simple ma cross, I added the fast/slow shift.
simple ma cross ea (with time filter).mq4
(6.83 KiB) Downloaded 309 times

Re: Timmy's Expert advisor service

#108
TimmyHanke wrote:
Sat May 12, 2018 1:17 am
Dune2000 wrote:
Sat May 12, 2018 1:03 am


Sorry for keeping you waiting Sir, but the market is slow that is why testing is slow!

Thanking you for your efforts!
I love that you are fast to reply to tell if it works or not , most are not like you.
And even if it works most often never write that , and that is something i want to know , because a problem can be solved in 1 000 000 different ways , some are faster some take time.

In this case why i refreshed the page just waiting for you to write back was because when i send the latest i didnt know why the terminate triggered so fast , and the way i solved it were just to delay it until the pending order wasnt there and the sequence had a chance to do the work , but i used something like this :

If group 1 hit stoploss enter opposite trade if it didnt terminate , and if not can mean many things in this case , not that it hit take profit instead , can mean that it didnt close at all aswell , so any conditions exept stoploss it looked at and if that didnt happend it terminated .

Now it looks at did it hit stoploss , open next section trade , or if it hit take profit terminate . So now it only looking for two things :)
Hi Timmy, first of all congratulate you for your great work and generosity and for all that you contribute in this forum with your great knowledge of programming.

I like to work with prices. I have been testing these days both EA with the idea of Dune2000 so I was wondering if you could make a version of these EA so that instead of using pips in the Offset variable, TP and Stop Loss could be added execution prices of pending orders, TP price and Stop Loss price, if you touch stop loss it does not close order but it also opens opposite operation.

The closing of operations would be reaching profit between losses and gains (Hedging).

Thank You In advance!

Re: Timmy's Expert advisor service

#109
mrtools wrote:
Thu May 17, 2018 3:33 am
Hercs wrote:
Thu May 17, 2018 12:32 am
MrTools, Mtiwana and/or Timmy,

Is there an Expert Advisor in this Thread ( I may have missed it during my search and I apologise up front if I did) that will work on the crossing of 2 moving averages ( I know it sounds so "old school"), but with this difference that I can adjust the shift of one of the MAs or both for that matter - independently.

Settings parameters as follows: Period; Shift; Method; Apply to.

Ideally I wish to add a CCI to it but for now it will suffice.

Thank you for replying at your convenience.
This is Mladen's simple ma cross, I added the fast/slow shift.
Hi MrTools,
As always grateful for your kindness.
Continued success to you.

Re: Timmy's Expert advisor service

#110
Hercs wrote:
Thu May 17, 2018 8:12 pm
mrtools wrote:
Thu May 17, 2018 3:33 am


This is Mladen's simple ma cross, I added the fast/slow shift.
Hi MrTools,
As always grateful for your kindness.
Continued success to you.
Good morning MrTools,
Sadly this EA does not trade a negative Shift well at all. Been testing it on M-5 to see but it just does not take the correct trade. Short when it is clearly long etc.
Thank you for being willing to find me a suitable EA.
Much appreciate you.


  1. Similar Topics

    1. Timmy Hanke Expert Advisor Service

      0 Replies 523 Views

      by TimmyHanke, Mon Sep 21, 2020 6:24 am in Express Coding & Commercial Services

      0 Replies
      523 Views
    2. I am stuck how to close a single buy order for expert advisor

      0 Replies 409 Views

      by EpsiloNews, Fri Aug 14, 2020 7:13 am in Coding Help

      0 Replies
      409 Views

Return to “MT4 Indicators”