NO LINKS, SOURCE CODE REQUESTS OR MODIFICATION OF DECOMPILED INDICATORS. To avoid post deletion please follow the rules.

Re: Timmy's Expert advisor service

#61
char2903 wrote:
Tue Sep 19, 2017 7:18 pm
TimmyHanke wrote:
Mon Sep 18, 2017 10:42 pm



Since squeeze break repaints like crazy it will enter at false places, I wrote that to you before, at since most of the signals and exits has to do with the squeeze break almost everything will be wrong
Please correct me if am wrong. Considering the indicator repaints like crazy, we are still going with a combination of 2 indicators here for our entry/exit.
candle 0 should close above BB stop blue line at the same time momentum is > 0, green histo > 0 & red histo = 0. If all these satisfy then wait for the next candle to open and break the high of prev candle (for which all the conditions were met) and if and only if the high is broken take a buy trade.
With this being the whole strategy, am not sure how squeeze break repainting cause any issue.
But you said you wanted 4 different trades on each of your signals 2 of them used squeeze break,
And then you had closings aswell with squeeze break , that what what I said that made everything wrong because squeeze break can and will change it's past value, and have a buy or sell based on that will make stuff wrong.

But if you want all of the condition on one trade it's a different thing .

More or less it's only the bb part that will make things happend , the other of the squeeze break will show what you want if it breaks higher high i think .


Re: Timmy's Expert advisor service

#62
Loki wrote:
Tue Sep 19, 2017 8:18 pm
mntiwana wrote:
Tue Sep 19, 2017 5:44 am

I think the EA you posted and is in question,using rsi and macd indicators, i am not coder,so dont know about buffer matters but i am going to post an EA in "Various Expert Advisors" thread that using RSI and MACD along with MA filter,Time filter and a lot more if you can understand it and handle it :)
posted here
viewtopic.php?p=1295363664#p1295363664
Hello mntiwana,

what i post is universal ea. everybody can use thier own signal indicator and/or filter indicator to make own ea. not neccesary rsi and macd. you can enter your own indicators in field 'indicator name' and 'filter name'.

see picture for example. i use sample signal indicator 'simplestoch' and as filter indicator 'nlma'.
now just alocate the buy and sell buffers for signal indicator and alocate uptrend and downtrend buffers for filter.
In example there is only 1 buy in the square because nlma is uptrend and simplestoch in buy signal.
i add indicators so you can test yourself but you can use any other indicators if you want. you just need to know what is buy/sell buffer and what is uptrend/downtrend buffer.

universalea.png
Oh ic,it is sample EA :)
Indicator is just a tool.

Use it only if it can benefit you. Leave it if you don't know how to use it optimally.

Re: Timmy's Expert advisor service

#63
TimmyHanke wrote:
Tue Sep 19, 2017 8:30 pm
char2903 wrote:
Tue Sep 19, 2017 7:18 pm


Please correct me if am wrong. Considering the indicator repaints like crazy, we are still going with a combination of 2 indicators here for our entry/exit.
candle 0 should close above BB stop blue line at the same time momentum is > 0, green histo > 0 & red histo = 0. If all these satisfy then wait for the next candle to open and break the high of prev candle (for which all the conditions were met) and if and only if the high is broken take a buy trade.
With this being the whole strategy, am not sure how squeeze break repainting cause any issue.
But you said you wanted 4 different trades on each of your signals 2 of them used squeeze break,
And then you had closings aswell with squeeze break , that what what I said that made everything wrong because squeeze break can and will change it's past value, and have a buy or sell based on that will make stuff wrong.

But if you want all of the condition on one trade it's a different thing .

More or less it's only the bb part that will make things happend , the other of the squeeze break will show what you want if it breaks higher high i think .
Ohh my mistake then. Sorry for confusing you with the 4 entries part. Can you please ignore that part and have just 1 entry and 1 exit where

Entry is - candle 0 should close above BB stop blue line at the same time momentum is > 0, green histo > 0 & red histo = 0. If all these satisfy then wait for the next candle to open and break the high of prev candle (for which all the conditions were met) and if and only if the high is broken take a buy trade.
Stop loss - BB stops + 2 pips
Trailing stop loss - BB stops
Break even move - as an option for user to key in the pips
Exit is - when either momentum < 0 or red histo > 0 or candle close below red BB stops

Sell is reverse.

Re: Timmy's Expert advisor service

#64
char2903 wrote:
Tue Sep 19, 2017 9:33 pm
TimmyHanke wrote:
Tue Sep 19, 2017 8:30 pm


But you said you wanted 4 different trades on each of your signals 2 of them used squeeze break,
And then you had closings aswell with squeeze break , that what what I said that made everything wrong because squeeze break can and will change it's past value, and have a buy or sell based on that will make stuff wrong.

But if you want all of the condition on one trade it's a different thing .

More or less it's only the bb part that will make things happend , the other of the squeeze break will show what you want if it breaks higher high i think .
Ohh my mistake then. Sorry for confusing you with the 4 entries part. Can you please ignore that part and have just 1 entry and 1 exit where

Entry is - candle 0 should close above BB stop blue line at the same time momentum is > 0, green histo > 0 & red histo = 0. If all these satisfy then wait for the next candle to open and break the high of prev candle (for which all the conditions were met) and if and only if the high is broken take a buy trade.
Stop loss - BB stops + 2 pips
Trailing stop loss - BB stops
Break even move - as an option for user to key in the pips
Exit is - when either momentum < 0 or red histo > 0 or candle close below red BB stops

Sell is reverse.
for the entry to make sense the ea now checks the previous bar if :
candle close is above bbands
momentum is above 0
green histro is above 0
if that is true and current price breaks previous high it buys

Removed red histro = 0 because if it was green it could not have been red .

the setting called : Inp_2OnProfitPips is the breakeven in pips , if you dont want to use that set that setting to a value that cant be reached , like 555 or something , then it wont work .

Dont have time to sit through the backtest , so try it out
Bbands test 1.mq4
(590.78 KiB) Downloaded 319 times

Re: Timmy's Expert advisor service

#65
TimmyHanke wrote:
Wed Sep 20, 2017 3:33 am
char2903 wrote:
Tue Sep 19, 2017 9:33 pm


Ohh my mistake then. Sorry for confusing you with the 4 entries part. Can you please ignore that part and have just 1 entry and 1 exit where

Entry is - candle 0 should close above BB stop blue line at the same time momentum is > 0, green histo > 0 & red histo = 0. If all these satisfy then wait for the next candle to open and break the high of prev candle (for which all the conditions were met) and if and only if the high is broken take a buy trade.
Stop loss - BB stops + 2 pips
Trailing stop loss - BB stops
Break even move - as an option for user to key in the pips
Exit is - when either momentum < 0 or red histo > 0 or candle close below red BB stops

Sell is reverse.
for the entry to make sense the ea now checks the previous bar if :
candle close is above bbands
momentum is above 0
green histro is above 0
if that is true and current price breaks previous high it buys

Removed red histro = 0 because if it was green it could not have been red .

the setting called : Inp_2OnProfitPips is the breakeven in pips , if you dont want to use that set that setting to a value that cant be reached , like 555 or something , then it wont work .

Dont have time to sit through the backtest , so try it out
Thanks Timmy, will try this now and let you know how I go.


Re: Timmy's Expert advisor service

#66
Loki wrote:
Tue Sep 19, 2017 8:18 pm
mntiwana wrote:
Tue Sep 19, 2017 5:44 am

I think the EA you posted and is in question,using rsi and macd indicators, i am not coder,so dont know about buffer matters but i am going to post an EA in "Various Expert Advisors" thread that using RSI and MACD along with MA filter,Time filter and a lot more if you can understand it and handle it :)
posted here
viewtopic.php?p=1295363664#p1295363664
Hello mntiwana,

what i post is universal ea. everybody can use thier own signal indicator and/or filter indicator to make own ea. not neccesary rsi and macd. you can enter your own indicators in field 'indicator name' and 'filter name'.

see picture for example. i use sample signal indicator 'simplestoch' and as filter indicator 'nlma'.
now just alocate the buy and sell buffers for signal indicator and alocate uptrend and downtrend buffers for filter.
In example there is only 1 buy in the square because nlma is uptrend and simplestoch in buy signal.
i add indicators so you can test yourself but you can use any other indicators if you want. you just need to know what is buy/sell buffer and what is uptrend/downtrend buffer.

universalea.png
hi loki,
i´ve played a little bit with this.
Please can you check the simplestoch indi. i think your version only show buy arrows.
i disable code line 72 and enter code line 73 to show both arrow types.
hope i´m right, because i´m not a profi coder.
simplestoch_1.ex4
(9.38 KiB) Downloaded 410 times
simplestoch_1.mq4
(2.45 KiB) Downloaded 310 times

Re: Timmy's Expert advisor service

#67

hi loki,
i´ve played a little bit with this.
Please can you check the simplestoch indi. i think your version only show buy arrows.
i disable code line 72 and enter code line 73 to show both arrow types.
hope i´m right, because i´m not a profi coder.
I am not coder myself but looked into it and make sense what you did. Hope you like it!

Re: Timmy's Expert advisor service

#68
char2903 wrote:
Wed Sep 20, 2017 8:13 am
TimmyHanke wrote:
Wed Sep 20, 2017 3:33 am

for the entry to make sense the ea now checks the previous bar if :
candle close is above bbands
momentum is above 0
green histro is above 0
if that is true and current price breaks previous high it buys

Removed red histro = 0 because if it was green it could not have been red .

the setting called : Inp_2OnProfitPips is the breakeven in pips , if you dont want to use that set that setting to a value that cant be reached , like 555 or something , then it wont work .

Dont have time to sit through the backtest , so try it out
Thanks Timmy, will try this now and let you know how I go.

Felt sorry for leaving you with somethin that i know is shit , so made a new version of it
Now it checks that the previous candle conditions and the current candle are :

Price over bb bands
Momentum > 0
Green hirsto > 0

Closing :
Break even = set a number like 555 if you dont want to use it
Complete opposite closing
prive above opposite bb bands ( opposite bands visible )
momentum < 0
red histro < 0
and trailing with the same bb + 2 pips

it only trades when all the conditions are tue , but close trades if only one of the closings are true .

Try it out my friend :)
Bbands test 2.mq4
(703.07 KiB) Downloaded 314 times

Re: Timmy's Expert advisor service

#69
Timmy: I have a well thought out idea using five or six or mladen indicators, all synchronized for a stop and reverse, continuous Expert Advisor. Your last correspondence was Sept 22 - Are you still generously offering the creation EAs for others? Please advise - uptrendfx@gmail.com. Thanks Dennis

Re: Timmy's Expert advisor service

#70
Welcome to my the work of my brain , everything is based on the same idea , price goes </> my objects high/low or above/below then it will react with filtering of 3 indicators , not in the same ea but different approaches to it using 3 diffent once , some dosnt use filtering at all.
So the ea will trend and reverse trade depending on the indicator used.

This is just to show how much effort i put in on once single idea i had, and thought it would be fun to see what you make out of it.
And thought it would be an christmas gift in a way.

Here is a total of 39 expert advisors based on the same idea but is totally different , add them to expert advisor folder and the 3 indicators to the indicator folder.

The once named 116 is my original idea , 117 is reversed , 118 is nonreversed but maybe improved filtering.
Non of the eas will be reliable on backtesting because it uses different timeframes than is applied to the chart and so on bla bla bla, and the semper one is tickbased.

Happy Christmas and a Happy new year !
Timmys brain.rar
(2.09 MiB) Downloaded 368 times


  1. Similar Topics

    1. Timmy Hanke Expert Advisor Service

      0 Replies 523 Views

      by TimmyHanke, Mon Sep 21, 2020 6:24 am in Express Coding & Commercial Services

      0 Replies
      523 Views
    2. I am stuck how to close a single buy order for expert advisor

      0 Replies 409 Views

      by EpsiloNews, Fri Aug 14, 2020 7:13 am in Coding Help

      0 Replies
      409 Views

Return to “MT4 Indicators”