HappyRe: MT4 Indicator requests and ideas

16971
mrtools wrote: Sun Nov 13, 2022 3:28 pm Sorry adding arrows on recalculating/repainting indicators is not a very good idea.
mrtools wrote: Thu Jun 09, 2022 3:04 am To start with found this done by Mladen quite a while ago, looks interesting.


Dear Mr Tools, this is a hidden gem.
It was never asked to upgrade it.
Now I dust it off and take it out
it's sparkling now. 1.
Please change the default setting to
ChannelPeriod 20
HigLowShift 20 2.
Please give silver line breakout channel, add alert and vertical line and arrow
An alert is an alert for a breakout channel

3.
Please change the color judgment of the zero line. DodgerBlue is displayed if the silver line is above the zero line. SandyBrown is displayed if the silver line is below the zero line. 4.

Please add a signal wire to the silver wire Gratitude
Honje
These users thanked the author Jedidiah for the post:
Mickey Abi
Be patient therefore, brethren, until the coming of the Lord. Behold, the husbandman waiteth for the precious fruit of the earth: patiently bearing till he receive the early and latter rain.
Behold, we account them blessed who have endured. You have heard of the patience of Job, and you have seen the end of the Lord, that the Lord is merciful and compassionate.


Re: MT4 Indicator requests and ideas

16974
Mickey Abi wrote: Sun Nov 13, 2022 4:50 pm Honje.

Whats the name of the green and red channel on the chart ?
Adaptive Donchian ZZ 100+BT
Give you

Honje
These users thanked the author Jedidiah for the post:
Mickey Abi
Be patient therefore, brethren, until the coming of the Lord. Behold, the husbandman waiteth for the precious fruit of the earth: patiently bearing till he receive the early and latter rain.
Behold, we account them blessed who have endured. You have heard of the patience of Job, and you have seen the end of the Lord, that the Lord is merciful and compassionate.


Re: MT4 Indicator requests and ideas

16977
sal wrote: Sun Nov 13, 2022 3:20 pm is this arrow valid!!
green arrow in Red line below
warnings !!
Yes the Arrow is valid ( was valid ) during that candle formation,

You can test

Open GBPUSD H1

Then use Period 11 you will get this Then Change period to 12, You will get this. Again change to Period 13, You will get this HOW TO USE HP Last IN TRADING
- Open H4 chart and add HP Last with period 7 | This will Give you intra_Day trading direction
- Then on lower Timeframe, m15 use HP with period 13 or Period 21
- Then if the last signal on H4 is BUY, then on lower timeframe you will take only BUY alert as as your Entry

NB | You can use other indicator on m15 to confrim your entries.
Below is GBPUSD H4, we have only BUY as our trading direction since 09/11
These users thanked the author DTRCT for the post (total 2):
sal, fxmoney

Re: MT4 Indicator requests and ideas

16978
[quote=DTRCT post_id=1295495865 time=1668335132 user_id=4931323]
Yes the Arrow is valid ( was valid ) during that candle formation,

thanks for information. :)
i check the mt4 tester for arrow repainting also, m1 chart. what i find that, arrow paint on 2nd bar from current bar..

i just try m5 9 & m1 14 periods settings .have you try the period in m5 arrow for m1 trades!!
"There is NO GOD higher than TRUTH" - Mahatma Gandhi

Re: MT4 Indicator requests and ideas

16979
It seems like the line recalculates, but the arrows don't refresh accordingly.
The coloring is not coded using the standard procedure.
I suppose that this part of the code:

Code: Select all

   //arrow handling
    for(x = limit - 1; x >= 0; x--)
    { 
       arrup[x] = EMPTY_VALUE;
       arrdwn[x] = EMPTY_VALUE;
    }
    
     for(x = limit - 1; x >= 0; x--)
    { 
     if (trend[x] != trend[x+1])
     {
             atr=iATR(Symbol(),0,100,x)/2;  //typical ATR value to get distance
             
             if (trend[x] > 0) //uptrend
             { 
                  if (ShowArrows == true ) {  arrup[x+1] = hpf[x+1] - atr * 2 ; }
             }
             else if ( trend[x] < 0 )  //downtrend
              {   
                  if (ShowArrows == true )   { arrdwn[x+1] = hpf[x+1] + atr * 2 ; }
                
              }
             
              
              
              
      }
      else
      {
       arrup[x] = EMPTY_VALUE;
       arrdwn[x] = EMPTY_VALUE;
       }
      
     }
should look like this:

Code: Select all

   //arrow handling
     for(x = limit - 1; x >= 0; x--)
    {
       arrup[x] = EMPTY_VALUE;
       arrdwn[x] = EMPTY_VALUE; 
     if (trend[x] != trend[x+1])
     {
             atr=iATR(Symbol(),0,100,x)/2;  //typical ATR value to get distance
             
             if (trend[x] > 0) //uptrend
             { 
                  if (ShowArrows == true ) {  arrup[x+1] = hpf[x+1] - atr * 2 ; }
             }
             else if ( trend[x] < 0 )  //downtrend
              {   
                  if (ShowArrows == true )   { arrdwn[x+1] = hpf[x+1] + atr * 2 ; }
                
              }
             
              
              
              
      }
      

Re: MT4 Indicator requests and ideas

16980
honje19960321 wrote: Sun Nov 13, 2022 3:49 pm Dear Mr Tools, this is a hidden gem.
It was never asked to upgrade it.
Now I dust it off and take it out
it's sparkling now.
微信截图_20221112201702.png
1.
Please change the default setting to
ChannelPeriod 20
HigLowShift 20
微信截图_20221113134239.png

2.
Please give silver line breakout channel, add alert and vertical line and arrow
An alert is an alert for a breakout channel

3.
Please change the color judgment of the zero line. DodgerBlue is displayed if the silver line is above the zero line. SandyBrown is displayed if the silver line is below the zero line.
3.png

4.

Please add a signal wire to the silver wire
4.png

Gratitude
Honje
Letting you know am working on it, while I'm at it will try and update it somewhat.
These users thanked the author mrtools for the post:
Jedidiah


Who is online

Users browsing this forum: Amazon [Bot], ChatGPT [Bot], didichung, Grapeshot [Bot], IBM oBot [Bot], Jimmy, me100rabh, sunmetal, WhatsApp [Bot] and 79 guests