Dearest Mrtools
May i know if "lukas" simply with one channel - is not "silver channel" by (AlexSilver) that have multi channels
regards
Dearest Mrtools
Could this ballasmrtools wrote: Wed Dec 26, 2018 1:20 pm
Another good one from Mladen::::::
Theory :
Efficiency ratio was invented by Perry Kaufman as a measure of volatility and as a way of making some calculations adaptive. In his adaptive moving average he uses 3 periods for calculation which makes it a bit "cryptic" and, by all means, not so simple to use. This version is simplifying the whole thing without an intention to clone the KAMA indicator - but with an intention to use the efficiency ratio for adapting the average calculations and to use only two parameters for that :
period
price
No other parameters needed
Usage :
It can be used as any other moving average type indicator
Please make sure in my converting it I didn't cause it to repaint, don't think so but since the market is closed now, not sure.
Found some repainting issues with this version should be fixed in this version I'm posting.
Brotherferdi421 wrote: Sun Jan 20, 2019 6:42 am hello sir i would ask you to make this file work
SUAT Kaya:
open[1]<bodytop[2] and open>bodybottom[1] and open<bodytop[1] and abody[1]<abody[2] and abody<abody[1])
if TrendUp[3] AND AdvanceBlock then
DRAWTEXT("Advance Block", barindex, high+atr*1.5, Dialog, Standard, 12) COLOURED(255,0,10)
DRAWARROWDOWN(barindex,high) COLOURED(255,0,10)
endif
TwoCrows=(body[2]>0 and body[1]<0 and body<0 and longcandle[2] and open[1]>close[2] and close[1]>close[2] and open<bodytop[1] and open>bodybottom[1] and close<bodytop[2] and close>bodybottom[2])
if TrendUp[3] AND TwoCrows then
DRAWTEXT("Two Crows", barindex, high+atr*1.5, Dialog, Standard, 12) COLOURED(255,0,10)
DRAWARROWDOWN(barindex,high) COLOURED(255,0,10)
endif
BearishBreakaway=(body[4]>0 and body[3]>0 and body<0 and open[3]>close[4] and close[2]>close[3] and close[1]>close[2] and longcandle and close>close[4] and close<open[3])
if TrendUp[5] AND BearishBreakaway then
DRAWTEXT("Bearish Breakaway", barindex, high+atr*1.5, Dialog, Standard, 12) COLOURED(255,0,10)
DRAWARROWDOWN(barindex,high) COLOURED(255,0,10)
endif
ShootingStar=(body[1]>0 and longcandle[1] and high>high[1] and shadowtop>2*abody and shadowbottom<0.3*abody)
if TrendUp[2] AND ShootingStar then
DRAWTEXT("Shooting Star", barindex, high+atr*1.5, Dialog, Standard, 12) COLOURED(255,0,10)
DRAWARROWDOWN(barindex,high) COLOURED(255,0,10)
endif
HangingMan=(body[1]>0 and longcandle[1] and high>high[1] and shadowbottom>2*abody and shadowtop<0.3*abody)
if TrendUp[2] AND HangingMan then
DRAWTEXT("Hanging Man", barindex, high+atr*1.5, Dialog, Standard, 12) COLOURED(255,0,10)
DRAWARROWDOWN(barindex,high) COLOURED(255,0,10)
endif
FallingThreeMethods=(body[4]<0 and body[3]>0 and body[1]>0 and body<0 and longcandle[4] and longcandle and close[2]>close[3] and close[1]>close[2] and low[2]>low[3] and low[1]>low[2] and high[1]<high[4] and open<close[1] and close<low[4] and close<low[3] and close<low[2] and close<low[1])
if TrendDown[5] AND FallingThreeMethods then
DRAWTEXT("Falling Three Methods", barindex, high+atr*1.5, Dialog, Standard, 12) COLOURED(255,0,10)
DRAWARROWDOWN(barindex,high) COLOURED(255,0,10)
endif
BearishThreeLineStrike=(body[3]<0 and body[2]<0 and body[1]<0 and body>0 and longcandle[3] and longcandle[2] and longcandle[1] and close[2]<close[3] and close[1]<close[2] and open<close[1] and close>open[3])
if TrendDown[4] AND BearishThreeLineStrike then
DRAWTEXT("Bearish Three Line Strike", barindex, high+atr*1.5, Dialog, Standard, 12) COLOURED(255,0,10)
DRAWARROWDOWN(barindex,high) COLOURED(255,0,10)
endif
BearishMatHold=(body[4]<0 and body[3]>0 and body[1]>0 and body<0 and longcandle[4] and close[3]<close[4] and close[2]>close[3] and close[1]>close[2] and low[2]>low[3] and low[1]>low[2] and high[1]<high[4] and open<close[1] and close<low[4] and close<low[3] and close<low[2] and close<low[1])
if TrendDown[5] AND BearishMatHold then
DRAWTEXT("Bearish Mat Hold", barindex, high+atr*1.5, Dialog, Standard, 12) COLOURED(255,0,10)
DRAWARROWDOWN(barindex,high) COLOURED(255,0,10)
endif
//Gaps
GapUp=(low>high[1])
GapDown=(high<low[1])
if GapUp then
DRAWTEXT("W", barindex, (high[1]+low)/2, Dialog, Bold, 12) COLOURED(0,0,255)
else
if GapDown then
DRAWTEXT("W", barindex, (high+low[1])/2, Dialog, Bold, 12) COLOURED(255,0,255)
endif
endif
RETURN
Ok, I try again. Don't know why the text did not appear.mrtools wrote: Wed Dec 26, 2018 1:20 pm
Another good one from Mladen::::::
Theory :
Efficiency ratio was invented by Perry Kaufman as a measure of volatility and as a way of making some calculations adaptive. In his adaptive moving average he uses 3 periods for calculation which makes it a bit "cryptic" and, by all means, not so simple to use. This version is simplifying the whole thing without an intention to clone the KAMA indicator - but with an intention to use the efficiency ratio for adapting the average calculations and to use only two parameters for that :
period
price
No other parameters needed
Usage :
It can be used as any other moving average type indicator
Please make sure in my converting it I didn't cause it to repaint, don't think so but since the market is closed now, not sure.
Found some repainting issues with this version should be fixed in this version I'm posting.
It's this fibo indicator.Skyold wrote: Sun Jan 20, 2019 9:34 pm can someone please tell or help me where to find these adr indicators?
mrtool has sometimes on his template here.
Thanks an d best regards
Desktop Screenshot 2019.01.20 - 11.21.02.82.png
No not like it is.RplusT wrote: Sun Jan 20, 2019 11:27 pm
Ok, I try again. Don't know why the text did not appear.
I was asking whether this indicator could be integrated in the MA ribbon filled to create an area and not just lines.
Here is the MA ribbon filled:
MA ribbon filled + shift 1.03 mtf nmc.mq4
mrtools many thanks for the quick support.
Users browsing this forum: Amazon [Bot], ChatGPT [Bot], duahauvietnam, Google [Bot], Grapeshot [Bot], hoanggiaquang87, WhatsApp [Bot] and 77 guests