Can't do anything with an ex4 indicator.JeanPierre458 wrote: Thu Aug 18, 2022 4:11 pm Good day,
Can someone please help me with this indicator so that it doesn't have as large of a delay on the signals? Or maybe settings I should put in? I'm not entirely sure but looks like a good indicator
Kind Regards
Re: MT4 Indicator requests and ideas
16222lol lots of "good day can someone" posts from u from last 7 months..........
pls remember a piece of advice::
"GRAIL" in ex4 format?? forget it dawg......... renamed code plus it repaints badly
pls remember a piece of advice::
"GRAIL" in ex4 format?? forget it dawg......... renamed code plus it repaints badly
JeanPierre458 wrote: Thu Aug 18, 2022 4:11 pm Good day,
Can someone please help me with this indicator so that it doesn't have as large of a delay on the signals? Or maybe settings I should put in? I'm not entirely sure but looks like a good indicator
Kind Regards
Official Forex-station GIF animator at your service
See a GIF with Forex-station.com on it? I probably made it
The best divergence indicator in the world.
Real news exists: Infowars.com
See a GIF with Forex-station.com on it? I probably made it
The best divergence indicator in the world.
Real news exists: Infowars.com
Re: MT4 Indicator requests and ideas
16223hello.
I like to trade with currency correlations.
If this indicator weighs only the symbols on the chart, is it possible to issue arrows with indicator buffers on crosses? ?
I like to trade with currency correlations.
If this indicator weighs only the symbols on the chart, is it possible to issue arrows with indicator buffers on crosses? ?
Re: MT4 Indicator requests and ideas
16224Could someone help with this indicator please. I'd like the option of changing the arrow size. Also when changing charts with symbol changer the values to the right all pile up into a mess.
Re: MT4 Indicator requests and ideas
16225Added menu for arrow size, but the rest I dont know....Phoenix wrote: Sat Aug 20, 2022 5:59 am Could someone help with this indicator please. I'd like the option of changing the arrow size. Also when changing charts with symbol changer the values to the right all pile up into a mess.
CCFp mtf 2.10- Simplied by R.mq4
- These users thanked the author kvak for the post:
- toddanderson
Re: MT4 Indicator requests and ideas
16227here you go PhoenixPhoenix wrote: Sat Aug 20, 2022 5:59 am Could someone help with this indicator please. I'd like the option of changing the arrow size. Also when changing charts with symbol changer the values to the right all pile up into a mess.
CCFp mtf 2.10- Simplied by R.mq4
Re: MT4 Indicator requests and ideas
16229Would anyone be interested in converting an adaptive non lag schaff trend? i think its better than mt4s traditional non lag schaff trend
or if someone already has it please share it, thank yous
or if someone already has it please share it, thank yous
Code: Select all
//@version=5
indicator('Adaptive, Zero lag Schaff Trend Cycle [Loxx]', shorttitle='AZLSTC [Loxx]', timeframe="", timeframe_gaps=true, max_bars_back = 5000)
RMA(x, t) =>
EMA1 = x
EMA1 := na(EMA1[1]) ? x : (x - nz(EMA1[1])) * (1/t) + nz(EMA1[1])
EMA1
EMA(x, t) =>
EMA1 = x
EMA1 := na(EMA1[1]) ? x : (x - nz(EMA1[1])) * (2 / (t + 1)) + nz(EMA1[1])
EMA1
_bpDom(len, bpw, mult) =>
HP = 0.0
BP = 0.0
Peak = 0.0
Real = 0.0
counter = 0.0
DC = 0.0
alpha2 = (math.cos(0.25 * bpw * 2 * math.pi / len) + math.sin(0.25 * bpw * 2 * math.pi / len) - 1) / math.cos(0.25 * bpw * 2 * math.pi / len)
HP := (1 + alpha2 / 2) * (close - nz(close[1])) + (1 - alpha2) * nz(HP[1])
beta1 = math.cos(2 * math.pi / len)
gamma1 = 1 / math.cos(2 * math.pi * bpw / len)
alpha1 = gamma1 - math.sqrt(gamma1 * gamma1 - 1)
BP := 0.5 * (1 - alpha1) * (HP - nz(HP[2])) + beta1 * (1 + alpha1) * nz(BP[1]) - alpha1 * nz(BP[2])
BP := bar_index == 1 or bar_index == 2 ? 0 : BP
Peak := 0.991 * Peak
Peak := math.abs(BP) > Peak ? math.abs(BP) : Peak
Real := Peak != 0 ? BP / Peak : Real
DC := nz(DC[1])
DC := DC < 6 ? 6 : DC
counter := counter[1] + 1
if ta.crossover(Real, 0) or ta.crossunder(Real, 0)
DC := 2 * counter
if 2 * counter > 1.25 * nz(DC[1])
DC := 1.25 * DC[1]
if 2 * counter < 0.8 * nz(DC[1])
DC := 0.8 * nz(DC[1])
counter := 0
temp_out = mult * DC
temp_out
zlagin = "Zero lag"
reg = "Regular"
iszLag = input.string(reg, title = "MACD Calculation Type", options =[zlagin, reg], group = "Basic Settings")
calc_type = input.string("Fixed", title='Calculation Type', options=["Band-pass Dominant Cycle", "Fixed"], group='Basic Settings')
src_in = input.source(title='Source', defval=close, group = "Basic Settings")
sm_type = input.string('EMA', title='MACD Smoothing Type', options=["ALMA", "DEMA", "EMA", "LSMA", "RMA", "SMA", "TEMA", "TRIMA", "VWMA", "WMA"], group = "Basic Settings")
cycleLength = input.int(title='Schaff Trend Cycle Length', defval=10, group = "Basic Settings")
fastLength = input.int(title='MACD Fast Length', defval=23, group = "Basic Settings")
slowLength = input.int(title='MACD Slow Length', defval=50, group = "Basic Settings")
sigPer = input.int(defval=3, title='Signal Period', minval = 1, group = "Basic Settings")
bp_period = input.int(13, "Band-pass Period", minval = 1, group = "Band-pass")
bp_width = input.float(0.20, "Band-pass Width", step = 0.1, group = "Band-pass")
cycle_len = input.float(200, "MACD Percent of Dominant Cycle (%)", step = 1.0, group = "Band-pass")/100
slMult = input.float(2.0, "MACD Slow-to-Fast Multiple", step = 0.1, group = "Band-pass")
efi_reduction = input.float(100, "Cycle Percent of Dominant Cycle (%) ", step = 1.0, group = "Band-pass")/100
upper_b = input.int(title='Upper Band', defval=85, group = "Thresholds")
lower_b = input.int(title='Lower Band', defval=15, group = "Thresholds")
alma_offset = input.float(defval=0.85, title="* Arnaud Legoux Moving Average (ALMA) Only - Offset", group = "Moving Average Inputs")
alma_sigma = input.int(defval=6, title="* Arnaud Legoux Moving Average (ALMA) Only - Sigma", group = "Moving Average Inputs")
lsma_offset = input.int(defval=0, title="* Least Squares Moving Average (LSMA) Only - Offset", group = "Moving Average Inputs")
greencolor = color.lime
redcolor = color.red
variant(type, src, len) =>
sig = 0.0
if type == "ALMA"
sig := ta.alma(src, len, alma_offset, alma_sigma)
else if type == "SMA"
sig := ta.sma(src, len)
else if type == "EMA"
sig := EMA(src, len)
else if type == "DEMA"
sig := 2 * EMA(src, len) - EMA(EMA(src, len), len)
else if type == "TEMA"
sig := 3 * (EMA(src, len) - EMA(EMA(src, len), len)) + EMA(EMA(EMA(src, len), len), len)
else if type == "WMA"
sig := ta.wma(src, len)
else if type == "TRIMA"
sig := ta.sma(ta.sma(src, math.ceil(len / 2)), math.floor(len / 2) + 1)
else if type == "RMA"
sig := RMA(src, len)
else if type == "VWMA"
sig := ta.vwma(src, len)
else if type == "LSMA"
sig := ta.linreg(src, len, lsma_offset)
sig
_macd(src, m_type, ma_type, f_len, s_len) =>
fast_MA1 = variant(ma_type, src, f_len)
fast_MA2 = variant(ma_type, fast_MA1, f_len)
diff_fast = fast_MA1 - fast_MA2
zlag_fast= fast_MA1 + diff_fast
slow_MA1 = variant(ma_type, src, s_len)
slow_MA2 = variant(ma_type, slow_MA1, s_len)
diff_slow = slow_MA1 - slow_MA2
zlag_slow= slow_MA1 + diff_slow
macd = 0.0
if (m_type == zlagin)
macd := zlag_fast - zlag_slow
else
macd := fast_MA1 - slow_MA1
macd
_stc(src, ma_type, cl, fl, sl, alpha, zlag) =>
fastK = 0.0, fastD = 0.0, fastKK = 0.0, stcReturn = 0.0
macd = _macd(src, zlag, ma_type, fl, sl)
lowMACD = ta.lowest(macd, cl)
highMACD = ta.highest(macd, cl) - lowMACD
fastK := highMACD > 0 ? (macd - lowMACD) / highMACD * 100 : nz(fastK[1])
fastD := na(fastD[1]) ? fastK : fastD[1] + alpha * (fastK - fastD[1])
lowStoch = ta.lowest(fastD, cl)
highStoch = ta.highest(fastD, cl) - lowStoch
fastKK := highStoch > 0 ? ((fastD - lowStoch) / highStoch) * 100 : nz(fastKK[1])
stcReturn := na(stcReturn[1]) ? fastKK : stcReturn[1] + alpha * (fastKK - stcReturn[1])
stcReturn
alpha_in = 2.0/(1.0+sigPer)
len_out_macd = int(nz(_bpDom(bp_period, bp_width, cycle_len), 1)) < 1 ? 1 : int(nz(_bpDom(bp_period, bp_width, cycle_len), 1))
len_out_cycle = int(nz(_bpDom(bp_period, bp_width, efi_reduction), 1)) < 1 ? 1 : int(nz(_bpDom(bp_period, bp_width, efi_reduction), 1))
specFL = calc_type == "Band-pass Dominant Cycle" ? len_out_macd: fastLength
specSL = calc_type == "Band-pass Dominant Cycle" ? int(len_out_macd * slMult) : slowLength
specCycle = calc_type == "Band-pass Dominant Cycle" ? len_out_cycle : cycleLength
stc = _stc(src_in, sm_type, specCycle, specFL, specSL, alpha_in, iszLag)
signal = stc[1]
middle = 50
goLong = ta.crossover(stc, middle)
goShort = ta.crossunder(stc, middle)
l_cont = stc > middle and ta.crossover(stc, signal) and not goLong
s_cont = stc < middle and ta.crossunder(stc, signal) and not goShort
color_out =
(stc >= 0 and stc > signal ? greencolor :
stc < 0 and stc < signal ? redcolor : color.gray)
stcColor1 = stc > stc[1] ? greencolor : redcolor
plot(stc, title='STC', color=stcColor1, linewidth = 3)
plot(upper_b, title='Upper', color=color.new(color.gray, 50))
plot(lower_b, title='Lower', color=color.new(color.gray, 50))
plot(50, color=color.new(color.gray, 30), linewidth=1, style=plot.style_circles, title = "Zero")
plotchar(len_out_macd, title = "MACD Fast BP Cycle Length", char = "", location = location.top)
plotchar(int(len_out_macd * slMult) , title = "MACD Slow BP Cycle Length", char = "", location = location.top)
plotchar(len_out_cycle, title = "Cycle BP Cycle Length", char = "", location = location.top)
0 + 0 = 0
Infinite / Infinite = 1
1 way to Heaven & it matters
Infinite / Infinite = 1
1 way to Heaven & it matters
Re: MT4 Indicator requests and ideas
16230Converted ;keringet wrote: Wed Aug 17, 2022 11:24 am Hi guys, is there anyone available who can spare some time and kindly assist me in converting the zero lag smoothed cycle from mt4 to mt5. Any suggestions would be highly appreciated thanks.
thanks from mrtools guidance !
Attachments
- These users thanked the author Milad8732 for the post (total 3):
- Chickenspicy, keringet, RodrigoRT7
NOT MANUAL , NOT AUTOMATE , MORE
Who is online
Users browsing this forum: Ahrefs [Bot], eka2, felixo, kvak, Proximic [Bot], ssscary and 97 guests