• The FNC Greedy System

Posted: **Sat Sep 20, 2025 4:56 pm**

Hi Funchi-san.
I would like to share how I have been using this indicator for trading in the past 2 weeks.
I hope Funchi-san can create a DB signal for it.
I am a trend flow trader. This indicator helps me confirm Volume pullbacks in a clear trend.
After confirming the trend from the H4 M30 timeframe, I usually wait for pullbacks in lower timeframes such as m15 and m5.
Before, when I did not use this indicator, I often entered orders when the Volume Pullback was not strong enough to reverse, so I often had a quite low RR ratio.
With this indicator, it helps me to achieve at least 2RR or more with each winning trade. It also helps me not to overtrade when using DB with 25 pairs.

The Volume bars do not repaint, so it can be trusted when used and checked visually on the chart.
Signal receiving conditions:
When the Volume bars exceed a certain threshold, it will give a signal opposite to the color of that Volume bar.
The signal will continue to stay until the opposite bar crosses the threshold, there will be no flat signal.
These thresholds can be customized to suit different timeframes.
Simply put, it is the same as OBOS like other indicators.

I use 20 for H1 and 50 for M30.

Posted: **Sat Sep 20, 2025 9:15 pm**

Hi Funchi-san,

First, thank you rsistoch for your request and for sharing your experience with CSW.
And also thanks to BeatlemaniaSA who kindly posted author official guide, which gives us the exact way CSW should be used.

To help you design the dashboard signals correctly, here is a clarification of the precise strategy rules as taught by original author, and referenced in BeatlemaniaSA’s guide.

Main principles:
Trend filter from higher timeframe (HTF)
Use D1 (preferred) or H4.
Trend is defined when the two CSW power lines are clearly separated (diverging):
Upper line above lower line = BUY trend.
Lower line above upper line = SELL trend.
Narrow/flat lines = no clear trend → no trades.

Entry timeframe (H1 example) in BUY trend:
On H1 we wait for volume pullback bars against the main trend.
Threshold: typically ±50 level for reliable signals (not just ±20).
In a BUY trend (from D1/H4):
Wait for a red volume bar < –50 (oversold).
Once that pullback is confirmed, the next change in volume back to BUY = long entry.

In a SELL trend (from D1/H4):
Wait for a green volume bar > +50 (overbought).
Once that pullback is confirmed, the next change in volume back to SELL = short entry.
Signal persistence
A signal remains valid until an opposite volume bar crosses the threshold.
No flat/neutral state in between.

Dashboard suggestion
Show:
HTF trend (BUY/SELL/Flat from CSW power lines).
Pullback detected (yes/no when volume crosses ±50 against trend, but +/-20 level can be used only on D1).

Thanks again for your great work!

Posted: **Sat Sep 20, 2025 10:43 pm**

Nabs wrote: Sat Sep 20, 2025 9:15 pm Hi Funchi-san,

First, thank you rsistoch for your request and for sharing your experience with CSW.
And also thanks to BeatlemaniaSA who kindly posted author official guide, which gives us the exact way CSW should be used.

To help you design the dashboard signals correctly, here is a clarification of the precise strategy rules as taught by original author, and referenced in BeatlemaniaSA’s guide.

Main principles:
Trend filter from higher timeframe (HTF)
Use D1 (preferred) or H4.
Trend is defined when the two CSW power lines are clearly separated (diverging):
Upper line above lower line = BUY trend.
Lower line above upper line = SELL trend.
Narrow/flat lines = no clear trend → no trades.

Entry timeframe (H1 example) in BUY trend:
On H1 we wait for volume pullback bars against the main trend.
Threshold: typically ±50 level for reliable signals (not just ±20).
In a BUY trend (from D1/H4):
Wait for a red volume bar < –50 (oversold).
Once that pullback is confirmed, the next change in volume back to BUY = long entry.

In a SELL trend (from D1/H4):
Wait for a green volume bar > +50 (overbought).
Once that pullback is confirmed, the next change in volume back to SELL = short entry.
Signal persistence
A signal remains valid until an opposite volume bar crosses the threshold.
No flat/neutral state in between.

Dashboard suggestion
Show:
HTF trend (BUY/SELL/Flat from CSW power lines).
Pullback detected (yes/no when volume crosses ±50 against trend, but +/-20 level can be used only on D1).

Thanks again for your great work!

Since everyone has different usage, different views on same indicators and different trading timeframes, as I said:
"these thresholds can be customized to suit different timeframes"
Personally, I don't use power lines because they are repaint. The only repaint indicator I use is Semafor.

It is advisable to use other indicators to confirm the trend on higher time frames instead of using the repainted power line.
If possible, I hope Funchi-san add the option to use power lines or just Volume bars in the FNC indicator to suit everyone's needs.
To use power lines you should give a specific number of distance between 2 lines to determine whether there is a trend or no trend.

Posted: **Sun Sep 21, 2025 1:03 pm**

rsistoch wrote: Sat Sep 20, 2025 4:56 pm Signal receiving conditions:
When the Volume bars exceed a certain threshold, it will give a signal opposite to the color of that Volume bar.
The signal will continue to stay until the opposite bar crosses the threshold, there will be no flat signal.
These thresholds can be customized to suit different timeframes.
Simply put, it is the same as OBOS like other indicators.

Nabs wrote: Sat Sep 20, 2025 9:15 pm Dashboard suggestion
Show:
HTF trend (BUY/SELL/Flat from CSW power lines).
Pullback detected (yes/no when volume crosses ±50 against trend, but +/-20 level can be used only on D1).

Added a signal indicator for CurrencyStrengthWizard.
Please let me know if it behaves differently.

Posted: **Sun Sep 21, 2025 2:58 pm**

funchi wrote: Sun Sep 21, 2025 1:03 pm Added a signal indicator for CurrencyStrengthWizard.
Please let me know if it behaves differently.

It works perfectly.
TYSM Funchi-san!

For those using it with stock indices, please enter the symbols manually.
Works on most popular pairs except JP225, whether it works with Nikkei 225 symbols or not I not test yet.
DE40 works but GER40 doesn't even though the 2 symbols are the same. It depends on the broker's symbols.

Posted: **Sun Sep 21, 2025 4:15 pm**

rsistoch wrote: Sun Sep 21, 2025 2:58 pm For those using it with stock indices, please enter the symbols manually.
Works on most popular pairs except JP225, whether it works with Nikkei 225 symbols or not I can not test yet.
DE40 works but GER40 doesn't even though the 2 symbols are the same. It depends on the broker's symbols.

The "CurrencyStrengthWizard" indicator is malfunctioning and is beyond my control.
Therefore, I have restricted the instruments that are processed with the "Target currency" parameter.

Posted: **Sun Sep 21, 2025 5:56 pm**

funchi wrote: Sun Sep 21, 2025 1:03 pm Added a signal indicator for CurrencyStrengthWizard.
Please let me know if it behaves differently.

Thank you, Funchi, however, I am encountering a problem with the display of the column. Can you help me, please?

Posted: **Sun Sep 21, 2025 10:18 pm**

Nabs wrote: Sun Sep 21, 2025 5:56 pm Thank you, Funchi, however, I am encountering a problem with the display of the column. Can you help me, please?

Please use the latest version.
post1295507591.html#p1295507591

Installation instructions.
post1295572186.html#p1295572186

Posted: **Mon Sep 22, 2025 1:54 pm**

funchi wrote: Tue Jun 10, 2025 9:29 am Please verify the operation if this is OK.
I have not tested it either.
It will take time and I would appreciate your cooperation.

Please let me know if my understanding is wrong.

Operating specifications,

Almost the same as ‘XU v010’.
XU SEMA SML’, “XU HA Candles+XMAv5” and “XU DAILY OPEN LINE” are not used.

Reference was made to v65m.
The only thing that changes is the various indicators for when the Semafor (reversal) is confirmed.

I am not particular about this, but if you are, I will consider it.

Related URLs
post1295567085.html#p1295567085
post1295567230.html#p1295567230

Helo funchi,

I use this MT5 dashboard so easier to see pairs I more focus on.
May I resuest for push and mail alert feature for FNC_DB5? It helps me when I am out of screen.

Many thanks.

Posted: **Mon Sep 22, 2025 7:51 pm**

FiveS wrote: Mon Sep 22, 2025 1:54 pm Helo funchi,

I use this MT5 dashboard so easier to see pairs I more focus on.
May I resuest for push and mail alert feature for FNC_DB5? It helps me when I am out of screen.

Many thanks.

The download is now available.
Post #1: post1295507591.html#p1295507591

The FNC Greedy System

Re: The FNC Greedy System

Re: The FNC Greedy System

Re: The FNC Greedy System

Re: The FNC Greedy System

Re: The FNC Greedy System

Re: The FNC Greedy System

Re: The FNC Greedy System

Re: The FNC Greedy System

Re: The FNC Greedy System

Re: The FNC Greedy System