Cagliostro wrote: Wed May 28, 2025 8:54 pm Hi Funchi-san,

More, your past signal generators could also be set on MTF, so to have at the same time current TF and higher TF view for alignment. Would you be so kind to explore this option, if feasible?

Best,
+C+

It is not easy.
The ‘FNC_The Alkemix Saturn_Signals’ tool takes what is currently displayed on the chart and displays signals.
Therefore, there are four options to realise the MTF functionality.
The advantages, disadvantages and my workload are described below.

1.
Open another upper TF chart window by yourself and check the MTF.
Everyone uses this method almost exclusively, regardless of their trading system.

There is no need to set the parameters of each indicator from this tool.
The processing speed of this tool is normal.
There is no work to modify this tool.

2.
One chart window is used to display MTF signals.
However, the chart window must also display the higher TFs apart from the current TF.

There is no need to set the parameters of each indicator from this tool.
The processing speed of this tool is normal.
The amount of work required to modify this tool is low.
Probably feasible.

3.
Display MTF signals in one chart window.
But I don't want the chart window to display higher-level TFs separately from the current TF.

It is necessary to set the parameters of each indicator from this tool.
It is possible that not all parameters can be set due to a limit on the number of parameters. (The number limit is unknown).
Processing speed of the tool is slower than usual.
The amount of work required to modify this tool is high.
I don't want to do it.

4.
Display the signals of this tool on the FNC_DB5 dashboard.
However, not in the same way as the dashboard up to now.
It is necessary to display a chart window for each currency pair.
In addition, a separate chart window needs to be displayed for each TF.

There is no need to set the parameters of each indicator from this tool.
The processing speed of the tool is normal.
The amount of work required to modify this tool is small.

rsistoch wrote: Thu May 29, 2025 8:11 am Yes it same, thank you.
About the 2 indicators PR and Kingfisher they themselves give up and down signals in the form of histogram, i think it will be a bit difficult with kingfisher, but you are a master in these cases.
よろしくお願いいたします!!!

Are the signal conditions correct?

FiveS wrote: Sun May 25, 2025 5:41 pm Maybe you may try retrieve data from oracle v2. post1295562379.html#p1295562379

This v2 version more stable for mty MT5. It fast and no (or little) white histogram experience.

It was no good.

funchi wrote: Thu May 29, 2025 9:18 am Are the signal conditions correct?

I did a quick check and I can see that the FNC kingfisher gives the correct signal but the PR is not correct. If I set the bar to check to 0 in the FNC PR, I will not get any signal, all flat, setting it to 1 will get some wrong signals.
During the process of using the PR, I also encountered it appearing and disappearing a few times.
If possible, please see my question about the FNC TDI.
post1295566380.html#p1295566380

よろしくお願いいたします!!!

Here are some VWAP indicators I found.

funchi wrote: Wed May 28, 2025 3:23 pm
It is now possible to set whether the last arrow should be ignored or not.

This was incomplete. Not available.
AVWAPs are not taken into account.
Sorry.

rsistoch wrote: Thu May 29, 2025 9:47 am I did a quick check and I can see that the FNC kingfisher gives the correct signal but the PR is not correct. If I set the bar to check to 0 in the FNC PR, I will not get any signal, all flat, setting it to 1 will get some wrong signals.
During the process of using the PR, I also encountered it appearing and disappearing a few times.
If possible, please see my question about the FNC TDI.
post1295566380.html#p1295566380

よろしくお願いいたします!!!

Do not make me check.

Please attach a picture of what bug it is.
I do not know up to the function of the indicator.
I created it as requested in the post.

PR does not have a histogram on the current (zero) candlestick.

FiveS wrote: Fri May 23, 2025 8:58 pm Hello funchi, nice to have you back to this community.

In your free time, no need to rush.

Need your help add these two indicators signal to FNC DB.

Signal judgements are similar with your MT4 Beats V5 signal post1295557384.html#p1295557384

gann h-l (3xhisto).ex5 post1295563995.html#p1295563995

and

dz adx trend avgs (mtf + alerts + divergence + btn).ex5 post1295563902.html#p1295563902

and also additional confirmation signal green/red histogram of jurik volty band (separate).ex5 post1295564823.html#p1295564823

Many thanks for your big effort and sharing so far....

Sorry.
Some indicators are very slow and cannot be dashboarded.
I do not know the cause.
I will create it again after my knowledge of MT5 improves.

funchi wrote: Thu May 29, 2025 10:32 am Do not make me check.

Please attach a picture of what bug it is.
I do not know up to the function of the indicator.
I created it as requested in the post.

PR does not have a histogram on the current (zero) candlestick.

Ok, I understand that the PR indicator is not very stable, so we can ignore it.
As for the FNC TDI indicator, when using RPL above TSL and MBL, the logic seems to be misunderstood.
According to my observation and comparison of the TDI indicator on the chart, the FNC TDI only gives an UP signal when RPL above TSL and TSL above MBL.
I expect to receive an UP signal when RPL above TSL and MBL, even when TSL below MBL, the signal is still UP.
As in the picture, the FNC TDI gives a flat signal for the USDCAD pair, but the TDI shows that RPL is above TSL and MBL. I think DB gives a flat signal because TSL is still below MBL.

rsistoch wrote: Thu May 29, 2025 11:20 am Ok, I understand that the PR indicator is not very stable, so we can ignore it.
As for the FNC TDI indicator, when using RPL above TSL and MBL, the logic seems to be misunderstood.
According to my observation and comparison of the TDI indicator on the chart, the FNC TDI only gives an UP signal when RPL above TSL and TSL above MBL.
I expect to receive an UP signal when RPL above TSL and MBL, even when TSL below MBL, the signal is still UP.
As in the picture, the FNC TDI gives a flat signal for the USDCAD pair, but the TDI shows that RPL is above TSL and MBL. I think DB gives a flat signal because TSL is still below MBL.

Yes, correct. This FNC TDI signal after TSL crosses MBL as well gives a signal. If it gives a signal when the RSI line Crosses MBL, it would be Helpful.