This is the reason i requested that you help us define NEW alerts to have different colors.

The old signals and the NEW are sometimes hard to define.

I will appreciate it.

Reverent wrote: Wed Dec 20, 2023 9:49 pm Words are not enough to express my gratitude for your awesome work. It worked brilliantly. Please I want to find out if there's a specific EA you've developed that can enter trades based on the parameters I set in the FNC_DB2 dashboard? I've been going through your FNC Greedy System EA thread and couldn't find one yet. Is there a particular one you can point me to please?

The EAs are "FNC_DB2_EA_010" and "FNC_DB2_EA_AwfullySimple".
The multifunctional is "FNC_DB2_EA_010".
It is included in post#1 of The FNC Greedy System.

The basic operation of "FNC_DB2_EA_010" is
Enter when the entry signal of FNC_DB2 is displayed.
It exits when the exit signal of FNC_DB2 is displayed.
In other words, the type of each signal and the condition setting parameters of FNC_DB2 are important.

Mokeji wrote: Wed Dec 20, 2023 10:35 pm Hello Funchi,

Could you please allow this function where new signal alerts have different colors?
Both old and new signals are all appearing same and it seems difficult knowing which to analyze.

Thank you for always.

It is not possible to do this as in the previous version.

It is going to be able to back-test.
It is more of a simulation.
Not only dashboard users will be able to check results with a combination of indicators.

There are many limitations, though,
Until now, we could not check the results except by forward testing,
It will be possible to create a good trading strategy in a short period of time.

Completion Chart
Overview

Displays entry arrows, exit marks, and pips on the chart.
Displays the results by trading, by wins/losses, and by total.
Total number of trades
Total pips profit/loss
Risk Reward Ratio
Probability of bankruptcy
Total period
Average weekly profit/loss pips
Average monthly profit/loss pips


Limitations / problem

Only one currency pair.
Need to create a preset of parameter settings from the "FNC_" indicator.
Of course, only indicators that have an "FNC_" indicator are eligible.
Need to understand the FNC_DB2 signal setup procedure.
The redraw indicator cannot be simulated correctly.
If the entry/exit timing is using more than a 4-hour time frame, the same result will not be achieved.
Very unresponsive.
The current candlestick cannot be simulated correctly when used to determine signals.

<Download>
In preparation.

Setup procedure

Formulate a trading strategy.
Check for the presence of the "FNC_" indicator. If not, ask for one to be created.
Set parameters with the "FNC_" indicator.
Save the preset.
　　Save the preset in the destination folder "Terminal\Common\Files\FNC_DB2\Presets".
　　If you do not have a folder, create it yourself.
Add "FNC_DB2_Simulation" to the chart.
Set the strategy in "FNC_DB2_Simulation".
　　Set the indicator name.
　　Set the preset names.
　　Set up to 10 presets.
　　Set the signal conditions. (Same as FNC_DB2)

I created a trading strategy for automated trading in the FNC_DB2 simulation.
It looks right as far as I can see on my desk, but what about in reality?

The trading outline is as follows.
Entry is when all directions match.
Exit is when the direction of H4 is opposite.
Entry/exit timing is M30.
Synergy_APB (HeikenAshi) Current of D1
Synergy_APB (HeikenAshi) Current of H4
Synergy_APB (HeikenAshi) Previous of M30

The results of the FNC_DB2 simulation are as follows
Win rate: 89%
Risk-reward ratio: 5.3
Survey period: 1043 days
223 pips/week average

Do you feel that the simulator is malfunctioning?
I have attached a chart that confirms this, although it is one trade.

It will begin operation in 2024.

funchi wrote: Tue Dec 26, 2023 4:04 pm I created a trading strategy for automated trading in the FNC_DB2 simulation.
It looks right as far as I can see on my desk, but what about in reality?

Keep up the excellent work Funchi! May 2024 be an awesome year for you, your family and ALL users of your trading system

Regards,
Beatle

@Funchi, thank you so much for granting my previous requests. I'm grateful beyond words. However, I have another determination request I'd like for you to fulfill when you have the time. This is from one of your indicators which I noticed will help me immensely in my trading. Please can you include it into the dashboard such that each time the gray dots touch the orange colored channel, it will reflect in the dashboard with red arrows (when it touches the upper channel) and blue arrows (when it touches the lower channel) and each time a sound alert will be sent? See image below:
I want to set it up in such a way that when the semafor 610, semafor 144 & semafor 34 arrows appear with the gray dots on the channel, an alert will be sent. I hope this is possible and wouldn't be too much trouble for you? Thanks in advance, bruh.

Reverent wrote: Tue Dec 26, 2023 11:58 pm @Funchi, thank you so much for granting my previous requests. I'm grateful beyond words. However, I have another determination request I'd like for you to fulfill when you have the time. This is from one of your indicators which I noticed will help me immensely in my trading. Please can you include it into the dashboard such that each time the gray dots touch the orange colored channel, it will reflect in the dashboard with red arrows (when it touches the upper channel) and blue arrows (when it touches the lower channel) and each time a sound alert will be sent? See image below:

funchi cycle.png

FNC_Cycle_Channel.ex4

I want to set it up in such a way that when the semafor 610, semafor 144 & semafor 34 arrows appear with the gray dots on the channel, an alert will be sent. I hope this is possible and wouldn't be too much trouble for you? Thanks in advance, bruh.

funchi cycle2.png

Indicator added.
Not uploaded in post#1.
If you would like to add a determination method, please post it.

Alerts are set in the FNC_DB2 parameters.
The name is the same. Note the destination folder.

good afternoon. My idea is to catch situations like this. Is it possible to automate this into your system?