Did this version, but in the other version it was using Period instead of TTFbars but it's the same. So, the results will be the same.
completely different results with and without this functionStatistics: Posted by Bazhenov — Thu May 09, 2024 3:06 pm
]]>
Hello bro.
Sometimes I must deleted Kijun, because some calculation is not good for this.
Kijun function have hard coded prices in its calculation.
Dont use Kijun for indicator calculation ( in lower 3-rd subwindow see whats happen ).
In this indicator is new added smoothing period for smoothing price and here you may use Kijun.
But presmoothing add some lag in this and how usefull is this you must test.
Hi Kvak, how are you?Sometimes I must deleted Kijun, because some calculation is not good for this.
Kijun function have hard coded prices in its calculation.
Dont use Kijun for indicator calculation ( in lower 3-rd subwindow see whats happen ).
In this indicator is new added smoothing period for smoothing price and here you may use Kijun.
But presmoothing add some lag in this and how usefull is this you must test.
I remembered this indicator which for me is one of the best confirmation indicators.
Could you update the avgs please??
Thank you very much again
Ehlers Early Onset(+ trend histo) (1).ex4Downloaded 1 time 316.72 KiB
Statistics: Posted by RodrigoRT7 — Thu May 09, 2024 2:26 pm
]]>
I just started mine on the forum.
Help is needed ! I just can’t add the function (input int TTFbars = 15; // Trend trigger factor bars) to the Trend scalp.mq5 indicator. So that you can change the value of the number of bars it takes when calculating. Maybe someone can make these small changes....
Did this version, but in the other version it was using Period instead of TTFbars but it's the same. So, the results will be the same.Trend - scalp.mq5Downloaded 5 times 12.27 KiBHelp is needed ! I just can’t add the function (input int TTFbars = 15; // Trend trigger factor bars) to the Trend scalp.mq5 indicator. So that you can change the value of the number of bars it takes when calculating. Maybe someone can make these small changes....
Statistics: Posted by mrtools — Thu May 09, 2024 1:33 pm
]]>
Statistics: Posted by Banzai — Thu May 09, 2024 1:15 pm
]]>
Could it be a memory problem?
Or, could it be that the order of the columns changes?
Thank you
Statistics: Posted by dacanba — Thu May 09, 2024 12:45 pm
]]>
Hello
Do you not execute trades? Sometimes
Delays in executing trades?
Always?
Sometimes? -- Sometimes
A similar question has been asked before. Is it not so? yes
Although the signal and the warning window appear, it does not execute all the operations. The behavior is random, sometimes yes other times no.
If a signal has already occurred immediately after the FNC system is activated, no entry will be made.Do you not execute trades? Sometimes
Delays in executing trades?
Always?
Sometimes? -- Sometimes
A similar question has been asked before. Is it not so? yes
Although the signal and the warning window appear, it does not execute all the operations. The behavior is random, sometimes yes other times no.
This is to avoid entering too late immediately after the FNC system is installed.
Restarting MT4 when the market is closed is not a problem, though,
If the market is open and a signal has been generated and you are waiting for an entry,
If you restart the FNC system, the signal will be ignored. No entry is made.
Could this be the cause?
If this doesn't ring a bell, I can't look into it without knowing the specific situation.
I have not currently encountered such a glitch.
Statistics: Posted by funchi — Thu May 09, 2024 12:10 pm
]]>
Can I ask myself, how many indicators can withstand tests? 
Why all the spammy posts lately? If you are not interested in indicators no longer, good for you, that's your way, for others they have a different way. Doesn't make one way superior to any other way, every trader is different.Statistics: Posted by mrtools — Thu May 09, 2024 12:02 pm
]]>
My father posted this before, but this is an upgrade.
post1295507000.html#p1295507000
I always want to see the same chart formation patterns.
Especially in long ranges with narrow fluctuations, I get confused.
I think this is also important when trading using contraction and expansion.
I will post an indicator that makes the length of the candlestick per point constant so that I can always see the same view.
There are similar indicators, but I pursued usability.
I can't improve it though it sometimes moves up and down and there are some issues. Please understand.
How to use it,
To change the scale, drag the price axis on the right.
The settings are kept for each currency pair and time frame.PriceScaleFixed.ex42024/5/9 Version 1.20Downloaded 7 times 24.22 KiB
Statistics: Posted by funchi — Thu May 09, 2024 11:54 am
]]>
Statistics: Posted by moey_dw — Thu May 09, 2024 11:52 am
]]>
Statistics: Posted by Bazhenov — Thu May 09, 2024 11:47 am
]]>
Hello daughter of Fuchi
How has your father been? I hope he's well.
I've been looking for the best setup for my system and have come up with this one (for now).
Hopefully I can at least modify the TFs without the EA or the signals stopping working.
I really appreciate your help
Greetings
- M30 - Xu ma
TMA 17
TMAMODE SmoothedMa
- M30-MACD-12-26-9
The MACD must be above the signal line.
- M30-MACD-12-26-9
The MACD must be above the zero line.
- M15-Semafor576
The appearance of the 576 dot on the bottom side.
- M5-Semafor576
The appearance of the 576 dot on the bottom side.
- M5-Semafor144
The appearance of 144 dots on the bottom side.
- M5-2ndDot
144 - 36
- M5- Murrey math
UP/DOWN 8/8
- Daily open
The closing price is above the daily opening price.
- H4/H1/M30/M15/M5/M1-ADX14
Uptrend and threshold 30 must be exceeded on all time frames.
- Entry Signal
When all of the above conditions are met.
- Exit Signal
When the condition of M15-Semafor144 changes.
- SL of EA
yes
- Note
Orly M30-MACD-12-26-9, The MACD must be above the zero line is oppsite in entry signal
How has your father been? I hope he's well.
I've been looking for the best setup for my system and have come up with this one (for now).
Hopefully I can at least modify the TFs without the EA or the signals stopping working.
I really appreciate your help
Greetings
- M30 - Xu ma
TMA 17
TMAMODE SmoothedMa
- M30-MACD-12-26-9
The MACD must be above the signal line.
- M30-MACD-12-26-9
The MACD must be above the zero line.
- M15-Semafor576
The appearance of the 576 dot on the bottom side.
- M5-Semafor576
The appearance of the 576 dot on the bottom side.
- M5-Semafor144
The appearance of 144 dots on the bottom side.
- M5-2ndDot
144 - 36
- M5- Murrey math
UP/DOWN 8/8
- Daily open
The closing price is above the daily opening price.
- H4/H1/M30/M15/M5/M1-ADX14
Uptrend and threshold 30 must be exceeded on all time frames.
- Entry Signal
When all of the above conditions are met.
- Exit Signal
When the condition of M15-Semafor144 changes.
- SL of EA
yes
- Note
Orly M30-MACD-12-26-9, The MACD must be above the zero line is oppsite in entry signal
Hello daughter of Funchi
Please, could you include the Murrey math indicator?
The conditions would be
Sell when it is above 8/8 and buy when it is below 0/8. in m15
It would be ideal if the ranges could be edited.
It would be for the 4031 system
Thank youXU v4-MMATH.ex4Downloaded 5 times 28.4 KiB
Statistics: Posted by dacanba — Thu May 09, 2024 11:40 am
]]>
Can I ask you why you still come here then?
I like women‘s big breasts and freedom of speechI also like feminism and various Japanese AV
lmao
Statistics: Posted by Jedidiah — Thu May 09, 2024 11:23 am
]]>
Can I ask myself, how many indicators can withstand tests?
Can I ask you why you still come here then?Statistics: Posted by boytoy — Thu May 09, 2024 11:17 am
]]>
Delays in executing trades?
Always?
Sometimes? -- Sometimes
A similar question has been asked before. Is it not so? yes
Although the signal and the warning window appear, it does not execute all the operations. The behavior is random, sometimes yes other times no.
Statistics: Posted by dacanba — Thu May 09, 2024 8:39 am
]]>
Thank you for taking your time to do these jobs, it works fine just....
The moving average type option (volume weighted ma) is missing, that's the one I use. This indicator on MT4 appears the option of RSI Regular on MT5 no. Maybe I'm confused or it's just the normal RSI.
Yes, normal rsi = regular rsi....The moving average type option (volume weighted ma) is missing, that's the one I use. This indicator on MT4 appears the option of RSI Regular on MT5 no. Maybe I'm confused or it's just the normal RSI.
I will update option with volume weghted ma....
Statistics: Posted by kvak — Thu May 09, 2024 8:15 am
]]>