rsistoch wrote: Tue Dec 16, 2025 9:28 am Hi Funchi-san.

Can DB be made capable of comparing the signals from two indicators?
As shown in the image below, I have an illustrative example using MA Rejection with two different MAs.

DB should receive a signal when both indicators are in agreement, or when one indicator is Flat.

If the two indicators opposite signals—one Up and one Down—then DB is Flat.

Please use “FNC_SignalBox”.

The basic concept is to display the most frequent signal as the result.
However, if the signal results are tied, “FLAT” is given the highest priority.

If “Up/Down signals priority” is set to “true”, then “UP” or “DOWN” will be prioritised.

Therefore, in this case, setting “Up/Down signals priority” should provide the answer to your question.